ILVE IAEBTNQ102 Truly Wireless Noise Canceling Earbuds User Guide
- June 6, 2024
- ILVE
Table of Contents
Truly Wireless Noise Canceling Earbuds
User’s Guide for Model IAEBTNQ102 v2900-01
Function Button
- Touch and hold for 5 seconds to power ON/OFF.
- Tap to play/pause music. · Tap to answer/end phone calls.
- Press and hold for 2 seconds to reject incoming calls.
- Quickly tap twice to skip to the next track (RIGHT).
- Quickly tap twice to play previous tracks (LEFT).
- Press and hold for 2 seconds to activate the voice assistant (LEFT).
- Press and hold for 2 seconds to switch modes between Normal, Transparent and ANC (RIGHT).
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts. Be sure to
match the left and right earbuds with the correct docking station in the case.
2. Earbud Indicator LEDs will turn red when charging. When fully charged, the
LEDs will turn off.
Note: These earbuds are quick charging. 20 minutes of charging gives the
earbuds 1 hour and 10 minutes of playtime.
Power & Battery Indicator LEDs
The 4 Blue LEDs represent the amount of battery the case charger has.
- LED=25%
- LEDs=50%
- LEDs=75%
- LEDs=100%
Charging the Case
Using a USB-C to USB cable (included), connect to the USB port of a powered-on
computer or USB power adaptor (not included) to charge the case. When the case
is charging the Power & Battery Indicator LEDs will flash blue. When fully
charged all LEDs will turn solid blue.
Pairing Bluetooth
Note: When earbuds are powered on them automatically link and enter into
pairing mode. You can power on a single earbud to use as a single unit if you
wish.
- With the earbuds linked, you can now connect to your Bluetooth device.
- On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBTNQ102 when it is discovered. When successfully connected to your Bluetooth device, a voice prompt will announce the Bluetooth connection.
- Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.
PLEASE NOTE : Due to the nature of truly wireless earbuds, you may
experience slight interruptions with your audio in areas with multiple 2.4Ghz
bands or in high wireless traffic areas.
Charging Case & Auto-On Feature
While the case power is ON:
- Placing the earbuds in the charging case will automatically power them off and begin charging.
- Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).
Active Noise Canceling
The Active Noise Canceling feature will electronically mute background noise.
It can be used to enhance the quality of any music or audio that is playing
through the earbuds. Transparent Mode enables the earbuds to pick up external
sounds, so you can stay aware of your surroundings.
Wireless Charging
The earbud charging case can be charged wirelessly. If you have a wireless
charging pad or device, you can set the case onto the wirless charger and
power your earbud case.
If you are using an iPhone there are a few additional settings and controls for the earbuds. You can access these by going into your iPhone Bluetooth settings and tapping the blue “i” symbol next to the IAEBTNQ102 label.
Customer Support
Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
ForWarranty Information and the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or to get
answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.) All other
trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- This product meets and complies with all Federal regulations.
- To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
WARNING: This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirements. The device can be used in
portable exposure conditions without restriction. FCC ID2A3OUIAEBTNQ102
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>