Sunnydaze DECOR GSI-6121 Rainfall Ridge Slate Tabletop Fountain Instruction Manual
- September 26, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR GSI-6121 Rainfall Ridge Slate Tabletop Fountain
Specifications
- Product Name: Rainfall Ridge Slate Tabletop Fountain
- Model Number: GSI-6121
- Warranty: 1-year warranty period
Product Usage Instructions:
Precautions
- Review all assembly and care information before using the product.
- Select a smooth, level surface to place the fountain.
- Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Assembly
- Insert the finger light on Pump (B) into the opening on the underside of Fountain Body (C).
- Firmly connect the pump to the water tube on the bottom of the fountain body.
- Place the fountain body onto Basin (A), ensuring the pump power cord runs over the groove on the back of the basin.
- Connect AC Adapter (D) to the pump power cord.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug the power cord directly into a properly grounded GFCI outlet.
- If necessary, adjust water flow rate using the flow control on the front of the pump.
- Rinse Decorative Stones (E) with clean water and gently arrange them on the bottom of the fountain body.
FAQ
-
Q: What should I do if I find a leak in the basin?
A: If a leak is discovered, contact an expert at your local hardware store for an appropriate sealant and carefully follow the sealant manufacturer’s instructions to seal the leak. -
Q: Can I detach the water tube from the fountain body?
A: No, detaching the water tube will damage the fountain and void the product warranty. -
Q: Are variations in color and texture of slate considered defects?
A: No, variations in the natural characteristics of slate are not a cause for return as slate is a natural product with unique colors and textures.
Purchase Date: / /
Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell. Replacement parts or products will be sent at
our discretion within the 1-year warranty period. Proof of purchase, with the
date of purchase as well as photos of the merchandise defect, must be
provided. Photos are used to determine the cause of defects and for future
quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by
phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com,
or via our contact us page at https://tiny.cc/SunnydazeContact
RAINFALL RIDGE SLATE TABLETOP FOUNTAIN
GSI-6121
Review all assembly and care information before using this product. Save this
manual for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a
soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all parts are accounted for before disposing of
packing materials.
Save the packing slip.
| No. | Parts | Qty. |
|---|---|---|
| A | Basin | 1 |
| B | Electric Submersible Pump w/ LED Finger Light | 1 |
| C | Fountain Body | 1 |
| D | AC Adapter | 1 |
| E | Decorative Stones | 1 PK |
IMPORTANT NOTES
Use care when unpacking and assembling this fountain. Before assembly, check
the basin for leaks. The sealant used to join the slate pieces can crack if
the fountain is not handled with care. Simply add water and wait to see if
water begins to leak. If a leak is discovered, contact an expert at your local
hardware store for an appropriate sealant and carefully follow the sealant
manufacturer’s instructions to seal the leak.
The water tubing is built into the fountain body. Take care when handling the
water tube; detaching the water tube will damage the fountain and void the
product warranty.
The light and light cable are rated for contact with water. Use care when
handling the light, dropping the light may cause the light to burn out
prematurely.
Slate is a natural product; the colors and texture of each piece are unique,
no two fountains will look the same. Each piece is cut from a large slab of
slate. Spalling (flaking) may occur during production, naturally over time,
and/or if slate is dropped. Variations in the natural characteristics of slate
are not a cause for return.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, SEALANTS OR CLEANING PRODUCTS.
ASSEMBLY
- Insert the finger light on Pump (B) into the opening on the underside of Fountain Body (C).
- Firmly connect the pump to the water tube on bottom of the fountain body.
- Ensuring the pump power cord runs over the groove on the back of the basin, place the fountain body onto Basin (A). Connect AC Adapter (D) to the pump power cord.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug the power cord directly into a properly grounded GFCI outlet.
- If necessary, adjust water flow rate using the flow control on the front of the pump. Once water flow is satisfactory, rinse Decorative Stones (E) with clean water and gently arrange them on the bottom of the fountain body.
NOTE: When first plugged in, there may be air trapped in the pump. It may take several moments for trapped air to escape, allowing water to flow.
Care & Maintenance
- For indoor use only.
- Keep fountain out of reach of children and pets.
- Keep the power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
- Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
- Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Avoid heavily chlorinated water as it may damage the fountain and pump.
- Periodically change the water to reduce scale and buildup — clean components regularly for optimal performance and appearance. DO NOT use abrasive materials and harmful additives such as bleach or chlorine to clean the fountain or pump.
- Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
- Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
- Although this fountain was designed for indoor use, there is potential for splashing or slow leaks. Test the fountain on a water-safe surface. Always protect surfaces that can be damaged by water.
Troubleshooting
- If water is not flowing within several moments of the fountain being plugged in, ensure the pump is fully submerged underwater. Add water to the reservoir if necessary. The pump may have air bubbles in the filter that can prevent water from circulating properly and can also cause excess pump noise. Unplug the power supply for a few moments and plug it back in.
- Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.
- Inspect the pump and tubing for obstructions.
- Pump noise can be caused by trapped air, low water level, or the pump being too close to the walls of the fountain. While the pump is fully submerged, try gently tapping the pump with your finger to help release the trapped air. Also, try adding water or moving the pump to help reduce noise.
- Make sure the AC adapter is fully connected to the pump power cable. If the light is not working, ensure the cable is fully connected and the seal is adequately tightened (do not over-tighten).
- Make sure the power outlet is working; consult a certified electrician when in doubt about electrical connections.
If you experience issues with assembly, pump operation, or the product was
damaged during shipping, please contact our customer service team through one
of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
IMPORTANT SAFETY INFORMATION
- For indoor use only.
- Keep fountain out of reach of children and pets.
- Fountains may splash or leak; always protect surfaces that can be damaged by water.
- Prevent water loss and damage to electrical sockets by ensuring the power cord has a drip loop; refer to the diagram on the right.
- Make sure the power cord is away from areas where it could be a trip hazard.
- Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
- Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
- Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
- Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
Any modification to the product or failure to follow recommended care will void the product warranty.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.