Sunnydaze DECOR NB-610037BLK Black Steel Portable Outdoor Wood Burning Fire Pit Instruction Manual

October 30, 2023
Sunnydaze DECOR

Sunnydaze-LOGO

Sunnydaze DECOR NB-610037BLK Black Steel Portable Outdoor Wood Burning

Fire Pit

Sunnydaze-DECOR-NB-610037BLK-Black-Steel-Portable-Outdoor-Wood-Burning-Fire-
Pit-PRODUCT

Product Information

The Fire Pit Rim is a metal fire pit that comes in several panels that need to be assembled. It is recommended to assemble the product on a soft, clean surface to avoid scratching or damaging the finish. The package includes four panels, eight bolts, and eight nuts. The product requires a Phillips screwdriver (not included) for assembly. The fire pit rim should be installed on a non-combustible surface and should not be used on wood decks or other combustible surfaces like grass, leaves, or mulch. It is recommended to install a fire-proof border such as bricks, rocks, sand, or dirt around the fire pit rim. The manufacturer advises against using accelerants to start a fire as it is dangerous and can damage the fire pit rim. The product should be cleaned and inspected periodically, and the ash produced should be cleaned out regularly. If you do not plan to use your fire pit rim for an extended period of time, covering it is recommended.

Product Usage Instructions

  1. Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
  2. Set Panels (A) upright and align the holes on the panels.
  3. Connect the panels by hand-tightening 2x Bolt (B) and 2x Nut (C).
  4. Repeat Steps 2 & 3 until all panels are connected.
  5. DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RIM.
  6. Tighten all hardware using a Phillips screwdriver (not included).
  7. Installing a fire-proof border such as bricks, rocks, sand, or dirt around the fire rim is recommended.
  8. Always use fire rims on a non-combustible surface; do not use on a wood deck or other combustible surfaces like grass, leaves, mulch, etc.
  9. All fire rims must be cleaned and inspected periodically. The ash produced in fire rims must be cleaned out regularly.
  10. Make sure the fire has completely died down and the metal is completely cool before you remove the ashes.
  11. Avoid using accelerants to start a fire; this is dangerous and can damage the fire rim.
  12. Avoid using any plastic materials in or nearby a fire. It is very difficult to remove the residue later, and the burning of this residue can cause the emission of toxic fumes.
  13. If you do not plan to use your fire rim for an extended period of time, covering it is recommended. Avoid exposure to water, the manufacturer is not liable for rust or damage caused by weather conditions.
  14. Let fires die down gradually, do not use water to put out a fire as this may cause the metal to crack as a result of the sudden drop in temperature.
  15. Any modification to the product or failure to follow recommended care will void the product warranty.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

FIRE PIT RIM
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference. Assemble on a soft, clean surface to avoid scratching or damaging the finish

TOOLS AND PARTS

Sunnydaze-DECOR-NB-610037BLK-Black-Steel-Portable-Outdoor-Wood-Burning-Fire-
Pit-FIG-2

No. Parts Qty.
A Panel 4
B Bolt 8
C Nut 8

WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed by children. Keep children away during assembly.

ASSEMBLY

DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RIM.

  1. Set Panels (A) upright and align the holes on the panels.
  2. Connect the panels by hand-tightening 2x Bolt (B) and 2x Nut (C).
  3. Repeat Steps 1 & 2 until all panels are connected.
  4. Tighten all hardware using a Phillips screwdriver (not included).

CARING FOR YOUR FIRE RIM

  • Installation: Installing a fire-proof border such as bricks, rocks, sand or dirt around the fire rim is recommended.
  • Use on a Safe Surface : Always use fire rims on a non-combustible surface; do not use on a wood deck or other combustible surfaces like grass, leaves, mulch, etc. Do not use fire rims near combustible structures such as vinyl or wood siding.
  • Clean Regularly : All fire rims must be cleaned and inspected periodically. The ash produced in fire rims must be cleaned out regularly.
  • Clean Safely : Make sure the fire has completely died down and the metal is completely cool before you remove the ashes.
  • Avoid Accelerants : Never use accelerants to start a fire; this is dangerous and can damage the fire rim.
  • Avoid Plastic : Never use any plastic materials in or nearby a fire. It is very difficult to remove the residue later, and the burning of this residue can cause the emission of toxic fumes.
  • Cover and Store : If you do not plan to use your fire rim for an extended period of time, covering it is recommended. Avoid exposure to water, the manufacturer is not liable for rust or damage caused by weather conditions.
  • Extinguish : Let fires die down gradually, do not use water to put out a fire as this may cause the metal to crack as a result of the sudden drop in temperature

SAFETY STATEMENTS & WARNINGS

  • For outdoor use only. Never use this product in an enclosed area.
  • Always follow local laws and regulations when using fire rims.
  • Exercise the same care and precautions as you would with an open fire.
  • Keep this unit a safe distance away from houses, garages, balconies, or overhangs when in use.
  • Use on a level, non-combustible surface with a fire-proof border.
  • Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
  • Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
  • Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or product damage.
  • The fire rim becomes very hot when in use; let it completely cool before cleaning or moving.
  • Keep out of reach of children.
  • Do not overfill or use this unit to burn leaves or trash.
  • Avoid using any fire pit or ring during dry or windy conditions.
  • Never leave unit unattended while hot or in use.
  • Supervise children and pets when the fire rim is in use.
  • Do not use chemical-based cleaners as this may damage the product and/or ignite uncontrollable flames during the next use.
  • Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary. Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
  • Ashes can remain hot for a long time after the fire is extinguished. Dispose of cold ashes properly

Any modification to the product or failure to follow recommended care will void the product warranty.

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: [email protected], or via our contact us page at https://tiny.cc/SunnydazeContact

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Sunnydaze DECOR User Manuals

Related Manuals