Sunnydaze DECOR HB-536-2PK Rectangle Galvanized Steel Raised Garden Bed Instruction Manual
- October 30, 2023
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR HB-536-2PK Rectangle Galvanized Steel Raised Garden Bed
Thank you!
Thank you for choosing Sunnydaze Decor.
We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year
warranty period.
Proof of purchase, with the date of purchase as well as photos of the
merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality
control.
Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by
phone at 833-982-1977, by email:
[email protected],
or via our contact us page at https://tiny.cc/SunnydazeContact
Read the assembly instructions carefully and follow the care instructions.
Save this document for future reference.
Assemble on a soft, clean surface to avoid scratching or damaging the
finish.
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
PARTS
| No. | Parts | Qty. |
|---|---|---|
| A |
Long Panel
| 2
B|
Short Panel
| 2
C|
Corner
| 4
D|
Bolt
| 32
E|
Wing Nut
| 32
Tools Required
(not included)
| Phillips
Screwdriver
---|---
CAUTION: SHARP EDGES USE EXTREME CAUTION
◄ WEAR GLOVES DURING ASSEMBLY ►
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children and pets away during assembly.
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely
assembled.
CAUTION: Sharp edges.
Wear gloves during assembly
HELPFUL HINTS
-
Do not tighten any bolts until the entire unit is loosely assembled.
If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together. -
Ensure panels are installed with the rolled edges facing the inside of the bed.
-
Align Corner (C) on the inside edges of Long Panel (A) and Short Panel (B).
-
Insert Bolt (D) through the outside edges of the panels and through the corner panel.
Loosely secure the bolts by hand-tightening Wing Nuts (E). -
After all pieces have been loosely assembled, tighten all wing nuts.
Any modification to the product or failure to follow recommended care will void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping, please contact our customer service team through one of the methods
mentioned at the top of page 1.
Please have the item number and order information ready to expedite
response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
