Sunnydaze Decor GWC-456 Black Powder Coated Steel Five Piece Fireplace Tool Set with Stand Instruction Manual
- October 30, 2023
- Sunnydaze DECOR
Table of Contents
WROUGHT IRON 5-PIECE FIREPLACE
TOOL SET WITH STAND
GWC-456
GWC-456 Black Powder Coated Steel Five Piece Fireplace Tool Set with
Stand
Read this manual carefully before using this product. Save this manual for
future reference.
Assemble components on a soft, clean surface to avoid damaging the finish.
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year
warranty period. Proof of purchase, with the date of purchase as well as
photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by
phone at 833-982-1977, by email:
[email protected],
or via our contact us page at https://tiny.cc/SunnydazeContact
Ensure all parts are accounted for before disposing of packaging.
NOTE: Bolt (G) may be located in the bottom of Center Pole (C). Remove
bolt before beginning assembly.
| No. | Parts | Qty. | |
|---|---|---|---|
| A | Eye Bolt | 1 | |
| B | Tool Holder Bar | 2 | |
| C | Center Pole | 1 | |
| D | Top Leg | 1 | |
| E | Bottom Leg | 1 | |
| F | Split Washer | 1 | |
| G | M6x20mm Bolt | 1 | |
| H | Tool Set | 4PC |
Tools Required (not included)
Phillips Screwdriver
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed by
children. Keep children away during assembly.
HELPFUL HINTS
- Sunnydaze Decor advises reading this manual thoroughly and assembling the item soon after purchase.
- Do not fully tighten hardware until the entire unit is loosely assembled. If the hardware is tightened too soon, mounting holes may not align, and parts may not easily fit together.
Assembly
- Evenly cross Top Leg (D) with Bottom Leg (E) and secure to the bottom of Center Pole (C) using Split Washer (F) and M6x20mm Bolt (G).
- Stand assembled components upright.
- Evenly cross both Tool Holder Bars (B).
- Use Eye Bolt (A) to secure the tool holder bars to Center Pole (C).
Care & Maintenance
SAFE USE: Only use on a flat, level surface.
GENERAL USE & CARE: Recommended for indoor use only.
Manufacturer and seller are not liable for any damage resulting from exposure
to outdoor elements. Damage from outdoor use and/or normal wear and tear is
not covered by the 1-year product warranty. INSPECT: Periodically check
assembly points and tighten fittings as necessary.
CLEANING: Use a damp cloth to clean. Do not use abrasive cleaners as
doing so may cause parts to tarnish or rust.
SAFETY STATEMENTS & WARNINGS
- Supervise children at all times; do not allow children to play on or play with any part of this product.
- Do not use the brush to sweep live coals (embers).
- Do not use harsh chemicals or abrasive materials to clean this unit.
- This product is for residential use only; institutional or commercial use will void the warranty.
Any modification to the product or failure to follow recommended care will
void the product warranty.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
Sunnydaze Decor
SunnydazeDecor.com
GWCP004
Documents / Resources
|
Sunnydaze Decor GWC-456 Black Powder Coated Steel Five Piece Fireplace Tool
Set with
Stand
[pdf] Instruction Manual
GWC-456 Black Powder Coated Steel Five Piece Fireplace Tool Set with Stand,
GWC-456, Black Powder Coated Steel Five Piece Fireplace Tool Set with Stand,
Piece Fireplace Tool Set with Stand, Fireplace Tool Set with Stand, Tool Set
with Stand
---|---