ASSA ABLOY 5390LN Electric Hinge Instruction Manual

: September 26, 2024
: ASSA ABLOY

Table of Contents

ASSA ABLOY 5390LN Electric Hinge
Product Specifications
Product Usage Instructions
FAQ
Installation Instructions
Wiring Instructions
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASSA ABLOY 5390LN Electric Hinge

Product Specifications

Model: 5390LN/5391LN & 4790LN/4791LN
Power Supply: 12VDC or 24VDC

Product Usage Instructions

Installation Instructions:

Plug lock connector into mating 8-pin door connector. Install lock as per instruction sheets included.
Verify that the hinge is connected to the door connector.
Wire hinge to power source. Refer to next page for wiring of the electric hinge.

Installation Notes:

Raceway harness with 8-pin and 4-pin connectors will be pre-installed inside the door by ASSA ABLOY door manufacturer for new applications.
Wiring to pigtail harness should follow facility wiring requirements.

Electric Hinge Wiring:

Wire option A, B, or other wiring requirement to pigtail harness of the hinge.
Ensure proper supply voltage is being applied at the pigtail harness.

Caution:

Ensure the supply voltage is within the specified limits to prevent damage to the lock solenoid.

Testing:

Plug pigtail harness 8-pin connector into the electric hinge 8-pin connector.
Test the lock by applying 12VDC or 24VDC to unlock or lock as per lock type (fail secure or fail safe).

FAQ

What should I do if the lock does not function correctly after installation?
- If the lock does not function correctly, ensure that the wiring is correct and that the supply voltage falls within the specified limits. If issues persist, contact customer support for assistance.
Is it necessary to consult with a code specialist before retrofitting a fire-rated opening?
- Yes, it is essential to consult with a code specialist or local code official before making any modifications to a fire-rated opening to ensure compliance with all applicable codes and ratings.

Installation Instructions

Installation with an ElectroLynx® Door

Plug lock connector into mating 8-pin door connector. Install lock as per instruction sheets included. (P/N 80-9150-0010-010)
Verify that the hinge is connected to the door connector.
Wire hinge to power source. Refer to next page for wiring of the electric hinge.

Installation Notes

With new applications a raceway harness with 8-pin and 4-pin connectors will be pre-installed inside door by ASSA ABLOY door manufacturer when specified during ordering process. Raceway harness kits are available for retrofit applications and for doors manufactured by non-ASSA ABLOY manufacturers.
Wiring to pigtail harness is per facility wiring requirement. Follow individual instructions on next page.

WARNING

This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.

WARNING

Attention Installer: Any retrofit or other field modification to a fire-rated opening can potentially impact the fire rating of the opening, and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire- rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.

Wiring Instructions

Sample wiring for solenoid locks with a 12 or 24VDC Regulated and Filtered Power Supply (Wiring shows power on and lock in secure state)

Electric Hinge Wiring

Wire option A, B (see above) or other wiring requirement to pigtail harness of the hinge.
Ensure proper supply voltage is being applied at pigtail harness.

Caution: 24V+/- 10% depending on lock solenoid installed. If voltage falls outside these limits the lock solenoid may be damaged and/or may not function correctly.

Plug pigtail harness 8-pin connector into electric hinge 8-pin connector.
Test lock. Applying 12VDC or 24VDC unlocks fail secure lock and locks fail safe lock.

Contact

1-855-577-5078 Ext. 2
www.accentra-assaabloy.com

Experience a safer and more open world

Copyright © 2007, 2012, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.