Recoil ICLED-4 Digital LED App Controller User Manual
- June 4, 2024
- RECOIL
Table of Contents
Digital LED App Controller
ICLED-4 Digital LED App Controller
ICED-4
- Main control module
- 4-LED output connectors
- 3ft Power/Ground/Remote turn-on wire
LED PRO CONTROLLER PHONE APP MANUAL
Introduction:
Edge’s digital LED controller uses advanced PWM (Pulse Width Modulation)
digital control technology for precise and accurate color management. The
controller can only be operated using the EZ LED PRO phone app. This app is
available in both and The ICLED-4 can operate at 12V DC – Ensure you are
using digital LED strips, or speakers with digital LEDs which match the output
voltage to the controller.
Connecting Controller:
(1) Connect the +12V, GND (ground), and REM into your controller. Use 24 gauge
wire and connect the REM wire to an optional SP/ST switch (not included with
the controller) or Ignition, or some switched 12V DC output wire to turn on
and turn off the digital LED controller and all LEDs.
(2) Now connect your digital LED strip or speakers LEDs to the 4 output
connectors.
Step 1 – Go to the phone’s Home, Menu, Settings, and Bluetooth Settings to
find this feature.
Step 2 – Select the Bluetooth box to turn on enabling. Tap Scan for devices.
Step 3 – Wait for the controller to appear, then tap it. This connects the
controllers to the smartphone.
MAIN STARTUP
Hit the left tep menu butten te cennect yeur centrellers. The setting is here
also at the right step. At the bottom is the user interface page change.|
MAIN STARTUP
Hit the left tep menu butten te cennect yeur centrellers. The setting is here
also at the right top. At the bottom is the user interface page change.|
SETTING SCREEN
At Setting, turn en Shake te the left te change Celer randomly.
Turn en Shake te the right te change Mede randomly.
---|---|---
| |
MOBE SCREEN
This is the FIRST page where you select how you want the LEDs to light up. You
can adjust the speed and brightness for this Mede on this page also.| COLOR
SCREEN
This is the SECOND page where you select celery and switch celer wheel. You
can also adjust brightness.| CUSTOM SCREEN
This is the THIRD page where you can customize the Mede. Tap the box with
Plus, cheese the celery, and confirm. It will be added te the Celer string ef
yeur custemzied Mede.
---|---|---
| |
MUSIC SCREEN
Enter into this page to select from your existing music/ playlists on your
smartphone to play through your audio system.
The LEDs flash or dance with your music.| TIMER SCREEN
Enter into this page to set up the time to turn on and turn off the LED.
And select the Mode. The Timer will be reset every time you power off the
controller.
---|---
|
FCC COMPLIANCE STATEMENT
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
www.RecoilAudio.com
© 2022, all rights reserved. Recoil and its ® logo are
Documents / Resources
|
Recoil ICLED-4 Digital LED App
Controller
[pdf] User Manual
ICLED-4, ICLED4, 2A6RGICLED-4, 2A6RGICLED4, ICLED-4 Digital LED App
Controller, ICLED-4, Digital LED App Controller
---|---