RECOIL PRC-1 Smartphone Remote Control User Manual
- June 5, 2024
- RECOIL
Table of Contents
SMARTPHONE REMOTE CONTROL MANUAL
PRC-1
DESIGN FEATURES AND FUNCTIONS
PAIRING INSTRUCTIONS
Press any button on the remote to wake it up. Open the Bluetooth setting menu in the device you wish to pair to. Toggle your devices Bluetooth to ON if it is not already. Ensure your device is in searching mode and is looking for devices to pair to. In the available devices menu, look for PRC-1 and select it. Once your device finds the remote, it will ask if you would like to pair with the remote. Select pair and exit the settings menu. If the pairing was successful, you will see the blue LED stays on for 1 second on the remote.
LEDs
Red LED: The red LED stays solid when the battery is in charge.
Green LED: Once the remote battery has depleted below 3.0V, the Green LED will
come on solid and remain on at all times.
Blue LED: Press and hold the power button to enter pairing mode, the Blue LED
flashes waiting to be paired.
REMOTE WAKE UP/SLEEP
After 20 minutes, if no buttons are used, the remote will automatically go
into sleep to preserve battery life. To wake it back up, simply press any
button on the remote once.
BATTERY CHARGING
Open the cover at back of the unit, you will see the micro USB charging port.
Plug in any micro USB cable to charge the battery, the red LED stays on while
charging. When it is fully charged, the red LED shuts off.
STEERING WHEEL/BAR MOUNT
Snap the unit into the plastic adaptor. Using the included rubber band for
steering wheel & bar mounting, hold the rubber against the steering wheel.
Wrap it around, then hook it up.
SLING
Use the included sling to carry this waterproof remote control wherever you
go.
Hooks
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements in
portable exposure conditions without restriction.
ADD: 3757 E Broadway Rd.,Suite 5, Phoenix P.C: AZ85040
© 2020, all rights reserved. Recoil and its ® logo are registered
trademarks of Ningbo AVS Industrial Company, Limited.
All other trademarks are property of their respective owners.
Documents / Resources
|
RECOIL PRC-1 Smartphone Remote
Control
[pdf] User Manual
PRC-1, PRC1, 2A6RGPRC-1, 2A6RGPRC1, PRC-1 Smartphone Remote Control, PRC-1,
Smartphone Remote Control
---|---