Lemokey X5 Mechanical Keyboard User Guide

: September 26, 2024
: Lemokey

Table of Contents

X5 Mechanical Keyboard
Specifications
Product Usage Instructions
1. VIA Key Remapping Software
2. Backlight Control
3. Key Rollover
4. Factory Reset
- Frequently Asked Questions (FAQ)
Q: What should I do if the keyboard keys are not
Q: Can I use third-party input tools with this keyboard?

X5 Mechanical Keyboard

“`html

Specifications

Layout: 96%
Switch type: Mechanical
Width: 133.7 mm
Length: 380.5 mm
Front height: 17.4 mm (without keycaps)
Back height: 26.6 mm (with keycaps
installed)
Keyboard feet height: 27.4 mm (without
keycaps), 38.6 mm (with keycaps installed)
Angle: 4.5 / 7 / 9 degree

Product Usage Instructions

1. VIA Key Remapping Software

To remap keys, visit usevia.app
using the latest version of Chrome, Edge, or Opera browsers when
the keyboard is connected via wire.

2. Backlight Control

To change lighting effect: Press Fn + Q
To toggle backlight on/off: Press Fn + Tab
To adjust brightness:
- Increase brightness: Press Fn + W
- Decrease brightness: Press Fn + S

3. Key Rollover

Switch between 6-key rollover and N-key rollover by pressing
Fn + N.

4. Factory Reset

If troubleshooting is needed, follow the steps to factory
reset:
– Download the correct firmware and QMK Toolbox from the
website.
– Unplug the power cable, remove the space bar keycap to access the
reset button on the PCB.
– Hold the reset key and plug in the power cable.
– Release the reset key; the keyboard enters DFU mode.
– Flash the firmware using QMK Toolbox.
– Factory reset by pressing Fn + J + Z for 4
seconds.

Frequently Asked Questions (FAQ)

Q: What should I do if the keyboard keys are not

responding?

A: If the keys are not responding, try performing a factory
reset as outlined in the manual.

Q: Can I use third-party input tools with this keyboard?

A: Third-party input tools are not compatible with this keyboard
due to compatibility issues with different operating systems and
drivers.

“`

X5 Mechanical Keyboard

IN THE BOX:
Lemokey X5 Mechanical Keyboard x 1 Type-C Cable x 1 Keycap-Switch Puller x 1 Extra Keycaps Set x 1 Manual x 1
2

Quick Start Guide 1 The keyboard’s default layout is configured for Windows. To use it with MacOS, please remap it using VIA.
Windows
3

2 The VIA Key Remapping Software

Please visit usevia.app to use the online VIA software to remap the keys. If the VIA cannot recognize your keyboard, please reach our support to get the instruction.

Your keyboard’s best friend

The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers yet. VIA only works when the keyboard is connected by wire to the computer.

3 The Backlight
Press Fn + Q to change the lighting effect

Press Fn+ Tab to turn the backlight on/off

Fn + Q 4

Fn + Tab

4 Adjust The Backlight Brightness
Press Fn + W to increase the backlight brightness

Press Fn + S to decrease the backlight brightness

Fn + W

Fn + S

5 The Key Rollover
Press Fn + N to switch 6-key rollover/N-key rollover
6-key rollover: the keyboard can detect up to 6 simultaneous key inputs. N-key rollover: the keyboard can detect all key inputs without limit to
the number of key presses. *The keyboard turns on the N-key rollover by default.
Fn + N
5

6 Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard? Download the right firmware and QMK Toolbox from our website. Unplug the power cable and remove the space bar keycap to find the
reset button on the PCB. Hold the reset key first, then plug in the power cable. Release the reset
key, and the keyboard will now enter DFU mode. Flash the firmware with the QMK Toolbox. Factory reset the keyboard by pressing Fn + J + Z (for 4 seconds).
*Step by step guide can be found on our website.

6

X5 MECHANICAL KEYBOARD SPECIFICATIONS

Specifications

Layout

96%

Switch type

Mechanical

Width

133.7 mm

Length

380.5 mm

Front height
Back height Keyboard feet height Angle

17.4 mm (without keycaps) 26.6 mm (with keycaps installed) 27.4 mm (without keycaps) 38.6 mm (with keycaps installed) 2.2 mm
4.5 / 7 / 9 degree

7

X5 MECHANICAL KEYBOARD OVERVIEW
8

DEFAULT KEY LAYOUT:
LAYER 0: This is the default layer.
LWin=Left Windows LAlt=Left Alt RAlt=Right Alt RCtl=Right Ctrl 9

LAYER 1: This layer will be activated when you press the Fn/MO(1) key. 10

LAYER 2 / LAYER 3This is a blank layer. 11

KEY DESCRIPTION

ScrScr+ Task File BLBL+ Prvs Play Next Mute Vol12

Task View File Explorer

Vol+ NKRO BL Toggle BL Cycle MO(1) MO(2) MO(3) MO(4)

N-key rollover
Turn Backlight on/off
Backlight Cycle
Layer 1 will be activated when holding this key Layer 2 will be activated when holding this key Layer 3 will be activated when holding this key Layer 4 will be activated when holding this key

Third-party input tools are not compatible with the keyboard. Due to compatibility, versions, brands and drivers of Windows/Android OS, functions of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
Certain function keys or multimedia keys do not work. Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices. Function keys: *Multimedia keys:
Safety Precaution: Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards. Always keep the product dry to avoid corrosion. Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard and battery.
13

Find us at: https://www.lemokey.com Support@lemokey.com
@lemokey @lemokey.keyboard @lemokey_com Designed by Lemokey Made in China
14

X5

Lemokey X5 x 1 USB x 1 x 1 x 1 x 1
16

1Windows VIA WindowsMac
Windows
17

2VIA

usevia.appVIA VIA VIA
VIAChromeEdgeOpera VIA

3/
Fn+Q

Fn+Tab/

Fn + Q 18

Fn + Tab

4
Fn+W

Fn+S