Lemokey G1 Wireless Mouse User Manual

Lemokey G1 Wireless Mouse

OVERVIEW

1. Left button
2. Right button
3. Middle wheel button
4.  Forward button
5. Backward button
6. Mouse indicator
7. DPI button
8. Modes toggle
9. 2.4GHz Type-A receiver
10. Receiver compartment

3-MODE OF CONNECTION

Wired Mode:

1. When the mode switch is in “OFF” position, the mouse won’t respond if the cable is not connected.
2. Connect the cable to the TYPE-C port of the mouse and the USB port on the device. The mouse is ready to use while the indicator lights up.
   • When connected by cable, the mode will default to wired mode even if the toggle is in Bluetooth mode or 2.4GHz mode.

2.4GHz Mode:

1. Switch to “G” mode (2.4GHz mode), and the mouse will automatically turn on 2.4GHz paring. The mouse indicator will slowly flash green.
2. Find the 2.4GHz receiver and connect it to the device’s USB. Once successfully connected, the mouse indicator will turn green and stay on for 3 seconds before dimming off. The mouse is now ready for use.
3. In 2.4GHz paring mode, the mouse indicator will slowly blink green for 3 minutes. If the mouse is not connected within 3 minutes, the indicator will turn off. If you need to reconnect, hold both the “Left button+ Middle Wheel+ Right button” for 4 seconds to re-enter pairing mode.
   • If you need to repair the connection in 2.4GHz mode, please unplug the 2.4GHz receiver first. Then, hold both the “Left button + Middle Wheel + Right button” for 4 seconds, wait for the green light indicator to start flashing, and plug the 2.4GHz receiver back in to complete the pairing process.
     Note: It is recommended that when pairing the Gl in 2.4GHz mode, the mouse should be within 20cm of the receiver.

Bluetooth mode

1. Switch to “B” Mode (Bluetooth), and the mouse will automatically turn on Bluetooth pairing mode. The mouse indicator will slowly flash blue.
2. Open the Bluetooth settings, search for a device named “Lemokey Gl”, then click “connect” to complete paring.
3. When in Bluetooth pairing mode, the mouse indicator will slowly blink in blue for 3 minutes. If it’s not connected within 3 minutes, the mouse indicator will turn off. If you need to reconnect, you need to hold the “Left button+MiddleWheel+Rightbutton” for 4 seconds to re-enter pairing mode. The indicator will slowly blink blue.
4. If the Gl is in Bluetooth mode and needs to pair with a new device, hold both the “Left button+Middle Wheel+Right button” for 4 seconds and wait for the blue light to flash on. At this point, Bluetooth has re-entered pairing mode, and you can connect the new device to the G1.

LED INDICATOR

STATUS INDICATOR

• 2.4GHz Mode
  • The mouse indicator slowly blinks green – Ready to be paired.
  • The mouse indicator quickly blinks green – Pairing with the previous device.
• Bluetooth Mode
  • The mouse indicator slowly blinks blue-Ready to be paired.
  • The mouse indicator quickly blinks blue- Pairing with the previous device.
• Low Power
  • The mouse indicator will slowly blink red.

DPI INDICATOR

REPORT RATE INDICATOR

*Please adjust the report rate in the driver software.

DRIVER SOFTWARE

The Lemokey G1 mouse driver can be selected on launcher.lemokey.com. If the driver software can’t connect to the mouse, please contact us for technical support.

AUTO-SLEEP MODE

Auto-Sleep mode will not be activated when in wired mode. When in Bluetooth mode or 2.4GHz mode, the mouse will go to Auto-Sleep mode after 10 minutes of sitting idle to save the battery. Move or click the mouse to wake it up.

HOW TO FACTORY RESET
Hold down both the “DPI” button and the “Middle Wheel” button for 4 seconds, and all the LED lights on the mouse will blink. It will blink three times to indicate that the factory reset is successful.

Charging indicator explanation

• Fully Charged
  The mouse indicator will stay GREEN.

• Low Power
  The mouse indicator will slowly blink RED.

The mouse is compatible with all USB ports. For the best signal and charging speed, connecting to the USB 3.0 port I recommended when charging or in use.
If the mouse is connected by the USB Type-C cable when charging but not paired with any devices:
The mouse indicator will stay RED when charging.
The mouse indicator will stay GREEN when fully charged.

Note: The product supports up to 5V charging voltage and 300 mA charging current. We are not responsible for any problems caused by improper recharging.

What’s in the box

• Mouse x1
• Type – C cable x1
• Extension adapter x1
• Type – A receiver x1
• User manual x1
• Type – A to Type – C adapter x1

Mouse specification

• Size: 116.859.539.4mm
• Weight: 55 ± 3g
• Report Rate(polling rate): 125(White) 500(Green) lO00(Blue) -2000(Yellow) -4000(Red)-B000(Purple)
• Sensor: PixArt 3950
• Resolution: 100-30000DPI
• Mouse micro switches: Huano Micro Switch (80 million clicks lifetime) 2.4GHz/
• Bluetooth connection range: Approx 10m of open space
• Battery capacity: 600mAh
• Usage duration:
  • 140 Hours (Bluetooth mode)
  • 120 Hours (1000hz)
  • 45 Hours (4000hz)
  • 40 Hours (B000hz)
• Recharge time: 2.5 Hours
• Charging port: USB Type -C
• Connection mode: 2.4GHz – Bluetooth – Wired
• Device name: Lemokey G1

Find us at:https://www.lemokey.com
Support@lemokey.com
@lemokey
@lemokey.keyboard
@lemokey_com
Designed by Lemokey Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>