Lemokey X1 Tenkeyless Mechanical Keyboard User Guide
- June 14, 2024
- Lemokey
Table of Contents
Lemokey X1 Tenkeyless Mechanical Keyboard
IN THE BOX:
- Lemokey X1 Tenkeyless Mechanical Keyboard x 1
- Type-C Cable x 1
- Keycap-Switch Puller x 1
- Extra Keycaps Set x 1
- Manual x1
Quick Start Guide
-
The keyboard’s default layout is configured for Windows. To use it with MacOS, please remap it using VIA.
-
The VIA Key Remapping Software
Please visit use via.app to use the online VIA software to remap the keys. If the VIA cannot recognize your keyboard, please reach our support to get the instruction.- The online VIA software can only run on the latest version of Chrome, Edge, and Opera browsers yet
- VIA only works when the keyboard is connected by wire to the computer.
-
The Backlight
-
Adjust The Backlight Brightness
-
The Key Rollover
Press FN + N to switch between 6-key rollover and N-key rollover
- 6-key rollover: the keyboard can detect up to 6 simultaneous key inputs.
- N-key rollover: the keyboard can detect all key inputs without limit to the number of key presses.
- The keyboard enables N-key rollover by default.
-
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Download the right firmware and QMK Toolbox from our website.
- Unplug the power cable and remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key first, then plug in the power cable. Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard by pressing FN + J + Z (for 4 seconds). Step by step guide can be found on our website.
X1 TENKEYLESS MECHANICAL KEYBOARD SPECIFICATIONS
- Layout TKL
- Switch type Mechanical
- Width 128.6 mm
- Length 356.7mm
- 16.5 mm (without keycaps)
- Front height 33.2 mm (with keycaps installed) 20 mm (without keycaps)
- Back height 37.4 mm (with keycaps installed)
- Keyboard feet height 1.3mm
- Angle 2/ 7 degree
X1 TENKEYLESS MECHANICAL KEYBOARD OVERVIEW
- Caps Lock Indicator
- Windows Lock Indicator
- Scroll Lock Indicator
- Type-C Port
DEFAULT KEY LAYOUT:
LAYER 0: This is the default layer.
LAYER 1 : This layer will be activated when you press the FN/M0(1) key.
Layer 2/ Layer 3: This is a blank player.
Key Description
Ser-| Screen Brightness Decrease
Ser+| Screen Brightness Increase
Bright-| Backlight Decrease
Bright+| Backlight Increase
Prvs| ****
Previous
Play| Play/Pause
Next
| Next
Mute
| Mute
Vol-| ****
Volume Decrease
Vol+
| ****
Volume Increase
NKRO| ****
N-key rollover
| BL Toggle | Turn Backlight on/off |
|---|---|
| BL Cycle | Backlight Cycle |
| PS | Print Screen Sysrq |
| SL | Scroll Lock |
| PB | Pause Break |
| M0(1) | layer 1 will be activated |
when holding this key
M0(2)| Layer 2 will be activated
when holding this key
M0(3)| Layer 3 will be activated when holding this key
M0(4)| Layer 4 will be activated
when holding this key
Reset| ****
Reset the keyboard
Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/Android OS,
functions of third-party input tools may be affected while using the keyboard.
Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work.
Functions of certain multimedia keys may be disabled due to compatibility,
versions, brands, and drivers of devices.
Safety Precaution:
- Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards.
- Always keep the product dry to avoid corrosion.
- Do not expose the product to extreme temperatures below -10°C (S°F) or above 50°C (131 °F) to preserve the lifespan of the keyboard and battery.
Find us at:
https://www.lemokey.com
Support@lemokey.com
Facebook : @lemokey
Instagram : @lemokey.keyboard
X @lemokey_com
Designed by Lemokey
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>