YUNZII AL75 CNC Aluminum Wireless Mechanical Keyboard User Manual
- September 26, 2024
- YUNZII
Table of Contents
YUNZII AL75 CNC Aluminum Wireless Mechanical Keyboard
USER MANUAL
SPECIFICATION
- Model: AL75
- Power Supply: Type-( SV5500mAh
- Size: 314.5137.738.2mm
- Weight: 1364g±20g
- Hot Swappable: Full-Key
- Hot Swappable Layout: 80-Key, 75% Layout
- Structure: Gasket Software: Windows
- Battery: 6000mAh
- Keycap: Double-Shot Cherry
- Polling Rate: l000Hz Profile PBT Keycaps
- System: Windows/Mac/Linux/ Android/iOS RGB: South Facing RGB
- Connection: Bluetooth 5.0, 2.4G Wireless, Type-C Wired
- Package Includes: Keyboard, Wired Cable, 2.4G Dongle, Extra Keycaps, Extra Switches, Switch and Keycap Puller, Manual
1. The AL75 keyboard supports Windows2000, WindowsXP , Vista Win7, Wins, Win
1 O, Win 11, MacOS and mobile phone systems.
2. Setting with 16.8 million RGB colors, default 18 lighting modes, and 8
colors.
3. The keyboard is equipped with Windows customization software, which
supports custom lighting and shortcut keys. The keyboard has a memory function
and can be used on other systems after being customized on the software.
4. The keyboard enters sleep or standby mode, the backlights are turned off,
and after waking up, it returns to the previous mode.
5. The keyboard intelligently identifies the Bluetooth 5.0 standard
communication in 3 channels.
SHORTCUTS
Windows:| MacOS:|
---|---|---
FN+Fl Computer| FN+Fl Screen Brightness ,I,| FN+1=BT1, LOG LED:Blue
FN+F2 Homepage| FN+F2 Screen Brightness 1′| FN+2=BT2, LOG LED:Purple
FN+F3 Calculator| FN+F3 Controller| FN+3=BT3, LOG LED:Cyan
FN+F4 Player| FN+F4 Program| FN-+4=2.4G, LOG LED:Green
FN+FS Previous Song| FN+FS No| FN+Right CTRL=Check Level
FN+F6 Next Song| FN+F6 No| FN+ESC=Reset
FN+F7 Play/Pause| FN+F7 Previous Song| WIN+l=Lock Screen
FN+FB Stop| FN+FB Play/Pause| FN+WIN=Lock win
FN+F9 Mute| FN+F9| Next Song
FN+FlO Volume Down| FN+FlO Mute|
FN+Fll Volume Up| FN+Fll Volume Down|
FN+F12 Mail| FN+F12 Volume Up|
BACKLIGHT AND LOG LED
| FN+DEL | Backlight Effect ON/OFF |
|---|---|
| FN+\I | Change Backlight Effect |
| FN+”=+” | Change Backlight Color |
| FN+”- II | Lighting Effects Direction |
| FN+➔ | Blinking Speed 1′ |
| FNH- | Blinking Speed ,I, |
| FN+t | Brightness Up |
| FN++ | Brightness Down |
| FN+INSERT | Change LOG LED Effect |
| FN+TAB Change | LOG LED Color |
| FN+PGUP | LOG LED Brightness Up |
| FN+PGDN | LOG LED Brightness Down – |
| FN+”[ {“ | LOG LED Speed ,I, |
| FN+”] }” | LOG LED Speed 1′ |
| FN+Space | Custom Backlight Color |
CONNECTION
1. Wired Connection
Switch the mode button to the USB Wired Mode, and connect the keyboard to the device using the cable that comes with the package. After the keyboard is automatically recognized, the connection is successful.
2. Bluetooth Connection
1. Switch the mode button to the Bluetooth Mode.
2. Short press FN+ 1 /2/3 to select the Bluetooth channel, and the LOG LED
will flash slowly.
3. Long press the FN+ 1 /2/3 for Ss to the Bluetooth pairing mode, the LOG
LED will flash fast.
4. Select the YUNZII AL7S BTl /BT2/BT3 to connect it, and the RGB will stay
on when paired successfully.
Note: If the pairing fails, the keyboard indicator turns off and goes to sleep, please reconnect it.This keyboard is compatible with Bluetooth 5.0, but doesn’t support Bluetooth 3.0.
3. 2.46 Wireless Connection
1. Switch the mode button to the 2.4G Wireless Mode.
2. Short press FN+4 to select the 2.4G channel, and the LOG LED will flash
slowly.
3. Long press the FN+4 for Ss to the 2.4G pairing mode, the LOG LED will
flash fast.
4. Plug the 2.4G dongle into your device, the device will automatically
recognize your keyboard, and the RGB will stay on when paired successfully.
Note: If the pairing fails, the keyboard indicator turns off and goes to sleep, please reconnect it.
Contact us for any support: support@yunzii.com
BATTERY
1. Low Power Mode & Charging
When the battery is lower than 15%, the LOG LED will flash red slowly, the backlight is turned off. When charging, the LOG LED will stream a green light; After charging is complete, the LOG LED will stay on green, and restore to the previous RGB mode.
2. Battery Query
In wireless mode (Bluetooth/2.4G), press and hold the FN+right CTRL to check the battery power. When the LOG LED is green, it means 50%-100% power; when it is yellow, it means 30%-50% power; When it is red, it means the battery is below 15%. When released, the keyboard returns to its previous lighting mode.
3. Power Saving Mode
When connected wirelessly (Bluetooth/2.4G), if there is no operation within 3 minutes, the keyboard enters sleep mode. The lights will turn off and the keyboard in the connected state. When the keyboard keys are awakened, characters are output at the same time. After 1 o minutes of no operation, the keyboard enters deep sleep mode. The keyboard will disconnect and the keyboard will awaken by pressing a key. The keyboard automatically reconnects after waking up. After reconnecting, the characters’ output is normal.
Keyboard Software
Download method:
1. Open the official website of yunzii, click on the software.
2. Unzip the downloaded software package and click the exe file to install
3. After the installation is complete, use the wired mode to connect to the
computer, and the software will automatically recognize the keyboard.
4. After the connection is completed, start using the software.
Driver download and installation:
System Support: Windows
Email: support@yunzii.com
Replacethe keycaps and switches
Remove Keycaps
1. Take your keycap puller and place it above the keycaps you want to remove,
at a 90-degree angle.
2. Push your keycap puller down until the metal hooks open themselves and
grab the keycap from underneath.
3. Grab your keyboard firmly and pull the keycap in a vertical motion.
Remove Switches
1. Take your switch puller and align the gripping teeth vertically(on the
Y-switch) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with a switch puller and apply pressure until the switch
releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a
vertical motion
Install Keycaps
1. Make sure the keycap is properly oriented on your keyboard and place it
above the switch.
2. Push the keycap into the switch stem firmly.
Install Switches
1. Check that all the switches’ metallic pins are perfectly straight and
clean. DO NOT USE SWITCHES WITH WELDING TRACES!
2. Ali9n the switch lamp hole with the backlight, the pms align themselves to
the keyboard PCB.
3. Press the switch down until you hear a click this means your switch clips
have attachea1 themselves to the keyboard plate.
4. Inspect the switch to ensure it’s properly attached to your keyboard, and
test it.
WARNING
Check whether the switch work normally, if the key doesn’t work, you may have bent one of the switches pin while installation. Pull the switch out and redo the process.Pins may be damaged beyond repair and need replacement if this P.rocess is not done correctly. Do not apply excessive force wlien replacing keycaP.S or switches to avoid damage to the socket.lfY.OU cannot remove or install keycaps or switches, please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
AL15 YUNZII
Contact us for any support: support@yunzii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>