YUNZII YZ98 Mechanical Keyboard User Manual

: June 16, 2024
: YUNZII

Table of Contents

YZ98 Mechanical Keyboard
SKETCH MAP:
FN AND LIGHT:
WIN FN DESCRIPTION:
MAC FN DESCRIPTION:
SPECIAL ATTENTION:
LIST OF ITEMS：
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YZ98
Mechanical Keyboard

YZ98 Mechanical Keyboard

YUNZII YZ98 Mechanical Keyboard Manual
After-sales Support: support@yunzii.com

INFORMATION:
Keyboard: YZ98
Battery: 4600mAh
Keys Layout : 99 keys
Structure: Gasket
RGB: 16 Modes, 8 Colors
Size : 385 x 145 x 28.5 / 19.5 mm
Weight : 1060g
DIY Software: Yes
Frame Materials: ABS
Keycap Materials: PBT
Connectivity: 2.4gHz Wireless, Bluetooth, Wired
Compatible System: macOS/Windows/Android/iOS
Hot-swappable support: Yes, 3 pin or 5 pin hot swap switches

SKETCH MAP:

SWITCHING AND CHARGING: YUNZII YZ98 Mechanical Keyboard - SWITCHING AND
CHARGING

➊ Mac and Win system switch
➋ TYPE-C connection port
➌ Bluetooth/wired/2.4G three mode switch
➍ 2.4G receiver placement hole

Use the charging cable provided with the product to connect the computer USB port or DC-5V charger to charge the keyboard. During charging, observe the direction of the TYPE-C connector and insert it carefully into the charging seat of the keyboard. When plugged in and powered on, the keyboard mode indicator will turn on red, and it will turn oﬀ automatically when fully charged.

BLUETOOTH CONNECTIVITY

YUNZII YZ98 Mechanical Keyboard - BLUETOOTH
CONNECTIVITY

Turn the mode switch of the keyboard to the position, and then long press FN+Q=BT1. At this time, the keyboard Bluetooth code matching lamp will ﬂash blue light. Long press FN+W=BT2, the keyboard Bluetooth code matching lamp will ﬂash pink light. Long press FN+E=BT3, the keyboard Bluetooth code matching lamp will ﬂash yellow light, and when the Bluetooth code matching is connected, the light will be on. The product uses the three channel Bluetooth connection method to carry out intelligent identiﬁcation Bluetooth 3.0-5.0 standard communication.

2.4G CONNECTION FN+R

Turn the mode switch of the keyboard to the position, press and hold the FN+R=2. 4G key, and the keyboard mode light will ﬂash blue. Then plug the receiver into the idle USB port of the computer. At this time, the computer will automatically check the code and install the corresponding adapter software. After the installation is completed and can be used, the keyboard check code light will stay on.

TYPE-C CONNECTION

Use the attached TYPE-C cable to connect with the computer. When the cable is plugged in, turn the keyboard mode switch to the middle wired mode position. At this time, the keyboard is automatically connected with the computer and can be used after installation. This indicates that the keyboard is successfully connected with the computer TYPE-C cable and can be used.

FN AND LIGHT:

■ FN+ / =Switch light mode
■ FN+DEL=Switch light color
■ FN+↑/↓=light brightness adjustment
■ FN+←/→=light breathing or change speed adjustment
■ FN+CAP=one key is a ways on white light
■ FN+BackSpace=Turn oﬀ/on Light
■ FN+right ALt=Check the electricity quantity – the number key 0-9 turns on, the green light indicates that the electricity quantity is suﬃcient, and the red light indicates that the electricity quantity is insuﬃcient
■ FN+ESC=light reset
■ FN+END=INS
■ FN+right Ctrl=seven colors of side lights+light oﬀ adjustment
■ FN+(-)=Side lamp change speed adjustment
■ FN+(+)=Side lamp light dark adjustment
■ FN+ESC+for 10s=Reset the keyboard

LIGHT MODES (16 MODES)

LIGHT COLOR (8 COLORS):
Red green blue yellow pink cyan white mixed color

WIN FN DESCRIPTION:

FN+F1 =Computer screen brightness –| FN+F2=Computer screen brightness +| FN+F3=Calculator
---|---|---
FN+F4=Computer| FN+F5=Player| FN+F6=Previous song
FN+F7=Next| FN+F8=Play/Pause| FN+F9=Stop it
FN+F1 0=Mute| FN+F1 1 = Volume –| FN+F1 2=Volume +
FN+Win=Lock Win key and press to release

MAC FN DESCRIPTION:

Fl =Computer screen brightness-| F2=Computer screen brightness+| F3=Ctr1+ direction
---|---|---
F4= sirl (Command+spacean Press and hold for 1s to release)| F5=CTRL+arrow key down| F6=Search (Command +Space)
F7=Previous song| F8=Next| F9=Pause/Play
Fl 0=Mute| F1 1 =Volume-| Fl 2=Volume+
Note: WIN/ALT will be interchanged when switching interfaces. Do not lock win
FN+F1 =F1| FN+F2=F2| FN+F3=F3
FN+F4=F4| FN+F5=F5| FN+F6=F6
FN+F7=F7| FN+F8=F8| FN+F9=F9
FN+F1 0=F1 0| FN+F1 1 =F11| FN+F1 2=F1 2

NOTES：

Autosleep Mode of YZ98: When the keyboard is still for 2-3 minutes, the keyboard will automatically turn oﬀ the backlight, and then press any key to wake the keyboard
Press FN+Backspace to turn ON/OFF the lights
For problem- Can’t be recognized by wireless connection: When the receiver of YZ98 is plugged in but the computer cannot recognize it, it should be caused by poor contact.
For problem – When the backlight of the keyboard is dim or the product is used abnormally, it is because the battery is insuﬀcient. Charge the keyboard in time in case of out of power. When charging, connect the supplied TYPE-C cable with the keyboard and PC. The charging time will vary from the power of the charger.
If the product is not used for a long time, please turn the product mode switch to the wired mode, then charging.
For problem: The keyboard is stuck or suddenly does not work. It is caused by the interference of the same frequency signal in the environment, except for the low battery. In this case, the TYPE-C cable can be used to connect the computer to the wired mode. You can also switch between the Bluetooth channel and 2.4G channel again.

SPECIAL ATTENTION:

If you want to disassemble this keyboard, the TYPE-C aluminum strip must be disassembled with an internal hexagonal screwdriver at ﬁrst, otherwise it will damage the keyboard.
YUNZIl wireless products are all designed with built-inlithium batteries.YZ98 keyboard uses (4600 mAh Battery). Therefore, for user safety, the products canonly be used indoors at room temperature. Please do not use them at high temperatures or near fire sources.
Don’t charge the keyboard by plug, power strip, and power bank. It can only been charged by the PC in wired mode.
Disposal of product damage: If the product is damaged and cannot be repaired, do not disassemble it or throw it into the fire to avoid accidental danger. It shall be sent to a professional waste disposal station or a special recycling box for disposal.
If you have any product problems, please contact YUNZIl after-sales support team: support@yunzii.com