YUNZII X71 Transparent Wireless Gasket Mechanical Keyboard User Manual

X71
Transparent Tri-Mode Wireless Customized
Mechanical Keyboard

Content List:

1. X71 Keyboard x1
2. USB Cable for TYPE-C x1
3. Keycap and Switch Puller x1
4. Warranty Manual x1
5. 2.4G Wireless Receiver x1

Quick Start Guide:

YUNZII X71 Keyboard On-Off Manual

1. Tri—Mode Switch Between Bluetooth, Wired and 2.4G Wireless
2. TYPE-C Port
3. Switch for MacOS and Windows Mode
4. 2.4G Receiver Port

Charging:
Charge the keyboard by connecting the original charging cable to the computer USB port, or using a DC—5V charger.
Note the direction of the TYPE—C cable and insert it carefully. The RGB will light red when charged and will go off when fully charged.

Compatible System:
The X71 keyboard supports Windows2000, WindowsxP, Vista Win7, Win8, Win10, Win11, MacOS and mobile phone systems.

Bluetooth Connection：

Switch the mode button to Bluetooth **** Mode. Then long press
FN+Q=BT1, and the indicator light blinks green. Press
FN+W=BT2, and the indicator light blinks pink. Press
FN+E=BT3, and the indicator light blinks yellow.

2.4G Wireless Receiver Connection：

Switch the mode button to 2.4G Mode.
Then long press FN+R=2.4G, and the indicator light blinks blue.
Plug the 2.4G receiver into the computer USB port, then it will pair and install the compatible program automatically.
The indicator light will stay on when paired successfully.

USB Cable Connection：

Switch the mode button to the middle Wired Mode.
When the cable is plugged in.
The keyboard will connect with the computer automatically, then it is ready for usage.

Quick Start Guide of FN key combination：

Quick Start Guide of RGB Settings：

Double-press the FN Key, change the 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, to