BluMill PM Electric Glass Panel Heater with WiFi Control Instruction Manual

BluMill PM Electric Glass Panel Heater with WiFi Control

Product Information

Electric Glass Panel Heater with WiFi Control

Model Number: PM

Specifications

• Voltage: AC 230V
• Frequency: 50/60Hz
• Indoor use only

Safety Instructions

1. Read the manual carefully before using the heater.
2. Ensure the heater and accessories are complete and intact before use.
3. Install the heater as per the provided instructions.
4. Do not leave the heater unattended during use.
5. Avoid using near-flammable or explosive materials.
6. Do not insert items into the protective grill of the heater.
7. Avoid touching the hot metal housing.
8. Unplug the heater if not in use for a long time.
9. Regularly check the condition of the heater before each use.

Usage Instructions

1. Ensure the heater is on a level, stable, and clean surface.
2. Plug the heater into a socket that meets the voltage and frequency requirements.
3. Avoid using the heater outdoors or in wet areas, such as bathrooms.
4. Do not let bare skin touch the surface of the heater during operation.
5. Avoid sharing the socket with other appliances to prevent fire risks.
6. Never cover the heater during operation to prevent overheating and fire.

Installation Instructions

1. Ensure all parts are complete and intact before installation.
2. If using freestanding, attach the feet provided following the instructions.
3. Mount the heater on a level, stable, and clean surface.

FAQ

Q: Can the heater be used outdoors?
A: No, the heater is only suitable for indoor use.

Q: Can I use an extension cord with the heater?
A: It is advised to avoid using an extension cord to prevent overheating and fire risks.

Q: What should I do if the supply cord is damaged?
A: If the supply cord is damaged, it must be replaced by the manufacturer or a qualified person to avoid hazards.

Model Number: PM
Please read the manual carefully prior to use

Safety Instructions

• Read the manual before you use the heater. Keep the manual and ensure it stays with the heater if you give it to a new owner.
• Before use, check that the heater and all supplied accessories are complete and intact.
• The heater must be installed as per installation instructions. The heater must be plugged into a socket that meets the following requirements: AC 230V,frequency 50/60Hz.
• The heater is only suitable for indoor use. Do not use it outdoors!
• Do not leave the heater unattended during use. Keep the heater out of the reach of children: risk of burns.
• Do not use an external controller with the heater. The heater must not be set to switch on when it will be unattended.
• Do not use the heater near flammable or explosive materials: risk of fire or explosion.
• Inserting items into the protective grill of the heater is strictly prohibited: risk of electric shock.
• Do not touch the metal housing as it will get hot when the heater is in use: risk of burns. Set aside some time to let the heater cool before you turn it off and store it.
• Unplug the heater if it is going to be out of use for a long time.
• Prior to each use of the electric heater, make sure it is in a good condition and intact. Do not plug in or use the heater if the casing, wire or plug are damaged.
• The heating element may be damaged if the heater is dropped or hit. Check that the element is not damaged prior to each use. Do not use the heater if the element is broken.
• Disconnect the plug from the socket when moving or cleaning the heater. When disconnecting, first turn off the switch, then unplug the plug. Do not yank the cable.
• Demolition of the electric heater without authorization is strictly prohibited. Please look for professional service personnel if the heater is damaged.
• The product is limited to home use only.
• During use, do not let bare skin touch the surface of the appliance: risk of burns.
• Do not share the heater’s socket with other appliances: risk of fire due to excessive load.
• CAUTION: never cover the heater. Covering the heater risks overheating and fire.
• The heater must not be located immediately below an electrical socket-outlet.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid a hazard.
• Avoid the use of an extension cord as this may overheat and cause a fire risk.
• This heater is not intended for use in bathrooms, laundry areas or similar locations where there may be moisture. Never place the heater where it may fall into a bathtub or other water receptacle
• Do not use the heater in the immediate surroundings of a bath, shower or swimming pool.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years to 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform maintenance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• CAUTION: some parts of this product can become very hot and cause burns. Particular attention must be given where children and vulnerable people are present.

Installation Instructions

Before installing, check that all parts are complete and the product is intact.
If you want to use the electric heater freestanding, please fit with the feet provided with the heater, following the instructions below. Make sure the heater is mounted on a level, stable and clean surface.

Freestanding Installation

1. Put the product upside down on a soft cotton cloth or carpet.
2. Fix the feet to the base of the heater using the screws provided. Line up the holes in the base with the holes in feet, put the screws through the holes and tighten with a screwdriver.

Wall Mounted Installation

Hook Type Bracket

1. Take out 4 brackets, 6 expansion screws and 6 screws out from the box, and fix 2 brackets onto the wall according to the distances between holes of the bracket, as depicted in the picture below.
   Mounting hole for 2500W

2. Fix 2 brackets onto the bottom of productst, as depicted in the picture below.

3. Hold the side of the product, look at the position of the wall hole of the rear cover, and slide the wall to the top of the slot, that is, the installation of the wall is completed, as depicted in the picture below.

Note: Prior to the drilling, make sure there is no cable or other pipelines on the wall to avoid damage. Remember that the screws on the wall shall be fixed and firm to ensure the safety installation of the electric heater on the wall. Please note the safe distance mentioned below.

• During installation, the heater must be maintained sufficiently safe distance from combustible materials and gas and away from water.
• During wall-hanging installation, keep the installation height from the ground greater than 15 cm. Hanging-type heater shall be no less than 50 cm away from the ceiling.

Using the Heater

Display Screen

• A. WiFi Connection
• B. Working Status –heating if icon displayed, not heating if not displayed
• C. Keyboard Lock
• D. Timer
• E. Comfort Mode
• F. Eco Mode
• G. Anti-Frost Mode
• H. setting
• I. up
• J. down
• K. power switch/WIFI setting

Heater Control

1. The heater will beep as it power on. The heater starts on standby mode, displaying the WiFi icon and the current temperature of the room in .

2. To initiate heating, press the ON/OFF button. When first use you will see the heating icon and the ECO mode icon, This means the device is in the ECO mode state. The heater has memory function, when you turn on it after the first time, it will be in the last working state: or and .
   Note: The memory function: you can control your heater by your phone over the world if the network connected.

3. To change heating mode, press the UP and DOWN to cycle through the modes: ECO mode , Comfort mode and anti-frost mode .

4. To adjust the set temperature of any of the modes, You can press the setting button, when the digital light flash then use the UP and DOWN buttons to adjust the temperature. Temperature range is from 5°C –50°C.
   Note: the temperature cannot be adjusted in anti-frost mode！

5. To set the timer, press the setting button, when the light flash then use the UP and DOWN buttons to adjust the time, Timer range is 1 – 24 hours. The digits will flash while setting and then the screen will return to heating mode. The timer icon on the screen will show that the timer has been set. The heater will heat until the time has elapsed.

6. To set the child lock, press and hold the UP button. The padlock icon will appear on the screen and the control panel will be locked out. To release, press and hold the downbutton. The padlock icon will disappear, indicating that all the buttons can be used again.

7. long press the setting button can turn off all the display lights and press any key to light up the display screen of the product. the product enters the low light mode after pressing the stop press the button for 30 seconds.In the low light mode, control the product through the APP, the product will not sound!

Connecting to WiFi

1. To connect your heater to the WiFi, the first step is to download the Smart Life app onto your smart phone or tablet. You can find the app by scanning the QR code below or searching “Smart Life” in the Google Play or Apple app store.

2. Download and install the app. Unless you already have a Smart Life account, you will need to create an account by tapping Register.
   The device will automatically determine your country, although you can change this if necessary. Enter your phone number or email address. If you enter a phone number, a verification number will be sent to your phone: enter this number to verify, then create a password. If you enter your email address, you’ll just need to create a password.

3. To add your heater to the app, first put the heater in WiFi connection mode. The heater is in WiFi connection mode when the WiFi icon is flashing. If the wifi icon is not flashing, go to standby mode and hold down the button for three seconds.

4. Once the icon is flashing, go to the app and press Add a Device. Select the device type (Small Appliances > Heater) and confirm that the indicator is flashing. You will then be prompted to enter your WiFi password. This allows the app to find your heater using your WiFi.

5. The app will then display its connecting screen.
   NOTE if the heater is failing to connect, press and hold the button for three further seconds. It will then switch to its secondary connection mode. The heater has two connection modes: one where the icon flashes slowly (once per second) and one where the icon flashes fast (three times per second). Most devices will connect on the fast flashing mode.

6. The heater will beep and display a solid icon when the device is connected.
   The app will confirm that the heater has been added. You can now name the device, share it with family members, or proceed to scheduling your heating.

Using the Smart Life App
You can use the app to control multiple devices. The status of your devices is shown on the device list:

• Offline (device is turned off at wall / rocker switch)
• Turned Off (device is in standby mode)
• Turned On (device is in heating mode)

When the heater is online, tap the device name to go to the control interface. Note: when the heater is offline, you will not be able to control it with the app.

Controlling the Heater

You can change the heater’s current mode by tapping the mode buttons. You can adjust the mode’s temperature using the + and – buttons when you’re on that mode.

Scheduling your Heating
You can program your heating by creating a schedule of “events”, where the heater switches on or off. These events can be temporary, like setting a timer, or they can be recurring, so the heater switches on at the same time every week. You can set an unlimited number of events, switching the heater on and off across the week.

For every event, you must set a start time. Then, choose whether you want it to repeat. Select “Only Once” if you just want to set a timer for now. If you want the event to repeat, select which days you want it to occur. Finally, choose whether you want the heater to switch on or off. Make sure you confirm your settings at every stage and press save to keep the event.

Each event will appear in your schedule. You can activate and de-activate events using the toggle. You can also delete events by swiping left and tapping Delete.

The heater will beep when it begins a new heating event. The heater will heat at whatever mode it was last set to: you cannot schedule mode changes. Note, if you change the heater’s setting during an event – i.e. turning it on when it is scheduled to be off – the heater will remain as it is until the next scheduled event.

Smart Features

The “Smart” section of the SmartLife app allows you to add functions that make your heating easier and more intuitive to control. The Smart section can be reached be pressing the Smart icon at the bottom of the app.

• Scenarios
  
  Scenarios are customisable commands that bring all your devices together to perform set actions. They appear as shortcuts on the app which you can trigger by tapping the image, offering a quick and easy means of co-ordinating your heating. For example, you could create a “Heat Boost” scenario that, at one tap, switches all your panel heaters on, at high power mode, at 30 °C.
  To create new scenarios, press the + button while on the Scenario screen. You can add as many heaters as you want to a scenario. You can control whether they switch on or switch off, what mode they run on, and what temperature they are set to. Any device controlled by the SmartLife app can be added to a scenario.

• Automation
  Automation allows you to set up actions that are triggered by external events. Triggers include the weather, temperature, humidity, sunset, sunrise and your location. You can add multiple actions and multiple triggers for each utomation event, so you could, for example, set all your heaters to come on at 21 °C if you arrive home when it’s snowing! To create new scenarios, press the button while on the Scenario screen.

• Voice integration

Smart Life is compatible with both Amazon Alexa and Google Home.
To connect, first download the SmartLife skill onto your Alexa or Google home app. You can then link your Alexa or Google home app with your SmartLife app. Depending on your device, your voice control app may discover your devices automatically, or you may need to prompt it to do so.
Once the SmartLife skill is enabled and linked with your SmartLife app, you should get notifications whenever you add a new heater or scenario. The notification will tell you what to say to control the heater or scenario by voice.
You can find quick guides to connecting the app to both Google Home and Alexa in the FAQ section. Press  then

Example commands:

• OK Google turn on Glass Heater *
• Alexa, switch off Glass Heater
• OK Google, switch Glass Heater to 25 degrees
• Alexa, set Glass Heater to 9 degrees
• OK Google, turn on Comfort **

where Glass Heater is what you’ve named the heater in the SmartLife app
** where Comfort is the name of a scenario created in the SmartLife app

Sharing
You can share control of your devices with family members. Go to then Family Management then Add Member. Add your new family member’s email address or phone number to send an invitation. Note you can only share to numbers and email addresses that are connected to app-compatible devices: smart phones or tablets.

When you add new members you can choose whether or not to set them as an administrator. Members added as administrators will have all family permissions, including the facility to delete the family. Members not set to administrator can control scenarios and devices but cannot add or remove them.

FAQs
Find the answer to many troubleshooting problems in the app’s FAQ to then

Technical Data

ERP LABEL

Model identifier(s): GPH-20D

Item| Symbol| Value| Unit| Item| Unit
Heat output| Type of heat input, for electric storage local space heaters only (select one)

Nominal heat output

| ****

Pnom

| ****

2.0

| ****

KW

| manual heat charge control, with integrated thermostat| ****

No

Minimum heat output (indicative)

| ****

Pmin

| ****

1.00

| ****

KW

| ****

manual heat charge control with room and/or outdoor temperature feedback

| ****

No

Maximum continuous heat output| ****

Pmax,c

| ****

2.0

| ****

KW

| electronic heat charge control with room and/or outdoor temperature feedback| ****

No

Auxiliary electricity consumption|  |  |  | ****

fan assisted heat output

| ****

No

At nominal heat output| elmax| N/A| KW| Type of heat output/room temperature control (select one)
At minimum heat output| elmin| N/A| KW| single stage heat output and no room temperature control| No
In standby mode| elSB| 0.00122| KW| Two or more manual stages, no room temperature control| No
 |  |  |  | with mechanic thermostat room temperature control| No
 |  |  |  | with electronic room temperature control| No
 |  |  |  | electronic room temperature control plus day timer| Yes
 |  |  |  | electronic room temperature control plus week timer| Yes
 |  |  |  | Other control options (multiple selections possible)
 |  |  |  | room temperature control, with presence detection| No
 |  |  |  | room temperature control, with open window detection| No
 |  |  |  | with distance control option| Yes
 |  |  |  | with adaptive start control| No
 |  |  |  | with working time limitation| No
 |  |  |  | with black bulb sensor| No
Contact details|

The product is for household use only.

Cleaning and care

Maintenance
Always disconnect the appliance and let it completely cool before any maintenance. Use a vacuum cleaner to remove dust on grilles. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never immerse the unit in water, nor let water drip into the unit.

Storing
Always disconnect the appliance, let it completely cool and clean it before storing. If you do not use the device for a long period, put back the unit and the instruction manual to the original carton and store in a dry and ventilated place. Do not place any heavy items on top of carton during storing as this may damage the appliance.

Hints on disposal

According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more de tailed information about recycling of this product, please contact your local council or your household waste disposal service.

Declaration of conformity
This product is conform to the following European Directives:

2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2009/125/EC (ErP) + Regulation (EU) 2015/1188

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>