YUNZII YZ19 Gasket Wireless Mechanical Knob User Manual

YUNZII YZ19 Gasket Wireless Mechanical Knob

SPECIFICATION

• Model: Y219
• Layout: 20% Layout, 19-Key and 1 Knob
• Back lights: South-Facing RGB
• Connection: Bluetooth,2.4GWireless, lYPE-CWired
• weight of Product: 219.5± 10g/0.48iD.02lb
• Size of Product: 92″13641 mm/3.625.35*1.6 l inch
• Hat swappable: Full keys hot-swappable, support 3/5 pins hat swappable switches
• Packing List: Keyboard, USB cable for TYPE-C, 2.4G Dongle, Switch and Keycap Puller, Manual Extra Keycaps and Switches
• Battery: 1 SOOmAh
• Structure: Gasket
• Polling Rate : l OOOHZ
• Software: Windows
• Ketcap: Dye Sublimation XDA Profile PBT Keycaps
• System: Windows/Mac/Linux! Andmid/iOS

Keyboard Switches

1. Keyboard ON/OFF Switch
2. Type-C Port
3. 2.4GSlot

Indicators

1. OBATTERY
2. NUMIOCK
3. CONNECTION

Multi-Function Knob (Default Multimedia Mode)

• Switching Mode:
  Short press FN+Knob to switch Mullimedia/RGB knob control mode.

• Multimedia Mode:
  Short press the knob is ESC, tum clockwise (rotate to the right), to tum up the volume; Turn counterclockwise (rotate to the left), to turn down the volume.

• RGB Mode:
  Short press the knob is ESC, tum left and right to adjust the backlight brightness.
  NOTE:
  The knob function can be customized by the software.

Connections

Bluetooth Connection: Fn + 1/2/3

1. Turn on the keyboard ON/OFF button.
2. Short press FN+ 7 /2/3 to select a channel of Bluetooth, and the connection indicator will flash Red/Blue/Yellow slowly.
3. Long press FN+ 7 /2/3 to the Bluetooth pairing mode, the connection indicator will flash Red/Blue/Yellow fast.
4. Select the YZl 9 3.0/YZ19 5.0 to connect it, and the RGB will stay on when paired successfully.
   Note: If the pairing fails, the keyboard indicator flashes slowly, please reconnect it.

2.4G Connection: FN + 4

1. Turn on the keyboard ON/OFF button.
2. Short press the FN+4 to select the 2.4G channel, and the connection indicator will flash Green slowly.
3. Long press FN+4 to the 2.4G pairing mode, the connection indicator will flash Green fast.
4. Plug the 2.4G dongle into your device, the device will automatically recognize your keyboard, and the RGB will stay on when paired successfully.
   Note: If the pairing fails, the keyboard indicator flashes slowly, please reconnect it.

Wired TYPE-C Connection: FN + 5
Switch the keyboard ON/OFF button to the OFF, and connect the keyboard to your device by the cable that comes with the package. After the keyboard is automatically recognized, the connection is successful.
Note: Without turning off the ON/OFF button, you can press the FN+S to the wired channel, using the cable that comes with the package to connect the keyboard to your device in wired mode.

Backlights and Shortcuts

Default 18 Backlight Modes, 9 Colours, and Customizable Backlights, Keys and Knob

Battery: FN+.

Low Battery Mode + Charging
When the battery is lower than 1 0%, the Battery Indicator will flash Red fast; When charging, the Battery Indicator will stay on Red; After charging is complete, the Battery Indicator will go off.

Battery Query

In wireless mode (Bluetooth/2.4G}, press and hold the FN+. to check the battery level, the keys “.” to “FN” will light up to display the power ratio, and the backlights will turn off. When released, the keyboard returns to its previous lighting mode.

Power Saving Mode
When connected wirelessly (Bluetooth/2.4G}, if there is no operation within 2 minutes, the keyboard enters sleep mode. The lights will turn off and the keyboard in the connected state. When the keyboard is awakened, characters are output at the same time.

KEYBOARD SOFTWARE

Download method:

1. Open the official website of yunzii, click on the software.
2. Unzip the downloaded software package and click the exe file to install.
3. After the installation is complete, use the wired mode to connect to the computer, and the software will automatically recognize the keyboard.
4. After the connection is completed, start using the software.

Driver download and installation

• System Support: Windows
• Email: support@yunzii.com

Driver update
Open the software and dick Update software in the lower right corner to get the latest version of the software.

REPLACE KEYCAPS AND SWITCH

Remove Keycaps

1. Grab your Keycap Puller Tool and place it above the keycap you want to remove at a 90 degree angle.
2. Push your Keycap Puller down until the metal hooks to open themselves and grab the keycap from underneath.
3. Grab your Keyboard firmly and pull the keycap in a vertical motion.

Install Switches

1. Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch lamp hole with the backlight, The pins aUgn themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it

Install Keycaps

1. Make sure the Keycap is properly oriented in your keyboard and place it above the switch.
2. Push the keycap into the switch shaft firmly.

Remove Switches

1. Grab your Switch Removal Tool and align the gripping teeth vertically ( on the Y-Axis) at the center of the switch, asshown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
4. Check whether the shaft is triggered normally

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>