Nero NRFW006 Square Tile Insert Floor Waste Instructions
- September 25, 2024
- Nero
Table of Contents
NRFW006 Square Tile Insert Floor Waste
“`html
Product Specifications
- Product Name: 100mm Square Tile Insert Floor Waste
- Outlet Size: 50mm
- Material: 304 Stainless Steel
- Live Load Bearing: 100KG
Product Usage Instructions
Installation
The installation of the 100mm Square Tile Insert Floor Waste
with a 50mm outlet should be done in compliance with the National
Construction Code Volume, Plumbing Code of Australia (PCA),
associated reference standards, and WMTS040.
Floor Waste Width Spiggot Size:
- 100mm
- 50mm
Nominal OD Floor Waste Pipe: 50mm PVC
Notes:
- The nominal OD aligns with the floor waste pipe.
Steps:
-
Cut the grate to suit the floor waste, leaving at least 3mm of
clearance in overall length to allow for easy removal for
cleaning. -
Install the floor waste according to the provided picture. It
can be installed in two ways: tile insert placement and normal
placement.
FAQ
Q: Can the floor waste be installed in other sizes?
A: The product is specifically designed for a 100mm square tile
insert floor waste with a 50mm outlet. Other sizes may not be
compatible.
Q: What is the material of the product?
A: The product is made of 304 Stainless Steel, ensuring
durability and longevity.
“`
100mm Square Tile Insert Floor Waste 50mm Outlet
Versions:202311 Drawing
SKU NRFW006
WM-032203
1x floor waste
NRFW006BN NRFW006MB
NRFW006GM NRFW006BG
NRFW006BZ
Installation Instruction
100mm Square Tile Insert Floor Waste 50mm Outlet-Manual
The installation of this Shower Grate is subject to the requirement of National Construction Code Volume. The Plumbing Code of Australia (PCA), associated reference standards as applicable at the time and WMTS040. The Maximum live load bearing is 100KG.
Floor Waste Width Spiggot Size
100mm
50mm
Nominal OD Floor Waste Pipe 50mm PVC
NOTES:
304 Stainless Steel
1
2
The nominal OD aligns with the floor waste pipe
1. Cut grate to suit floor waste allowing at least 3mm of clearance in overall length to facilitate removal for cleaning.
2. Install floor waste as above picture. Note: it can be installed 2 ways: tile insert placement and normal placement.
www.nerotapware.com.au 100mm Square Tile Insert Floor Waste 50mm Outlet-Manual
130mm Square Tile Insert Floor Waste 100mm Outlet
Versions:202311 Drawing
SKU NRFW008
WM-032203
1x floor waste
NRFW008BN NRFW008MB
NRFW008GM NRFW008BG
NRFW008BZ
Installation Instruction
130mm Square Tile Insert Floor Waste 100mm Outlet-Manual
The installation of this Shower Grate is subject to the requirement of National Construction Code Volume. The Plumbing Code of Australia (PCA), associated reference standards as applicable at the time and WMTS040. The Maximum live load bearing is 100KG.
Floor Waste Width Spiggot Size
126mm
103mm
Nominal OD Floor Waste Pipe 100-120mm PVC
NOTES:
304 Stainless Steel
1
2
The nominal OD aligns with the floor waste pipe
1. Cut grate to suit floor waste allowing at least 3mm of clearance in overall length to facilitate removal for cleaning.
2. Install floor waste as above picture. Note: it can be installed 2 ways: tile insert placement and normal placement.
www.nerotapware.com.au 130mm Square Tile Insert Floor Waste 100mm Outlet- Manual