SHUNDE 202401G Wireless Door Chime Instruction Manual

202401G Wireless Door Chime

Specifications

• Operating temperature: From -20°C to 50°C
• Operating distance (max): 150m
• Radio Frequency: 433.050MHz – 434.790MHz
• Sound level (max): 80dB
• Power:
  • Receiver: 90.5-110V~60Hz AC
  • Transmitter: 3V 0.5W DC
• Recommended for indoor use only

Product Usage Instructions

Transmitter Unit Setup

1. Power off the receiver.

2. Hold the melody selection/pairing button and plug the
   transmitter into the socket to power on.

3. Press the push button needed once, the receiver will make a
   Ding sound.

4. If you have multiple push buttons, press each one successively
   within 30 seconds.

Receiver Unit Setup

1. Wait for around 5 seconds after setup to hear 2 Ding Dong
   sounds, indicating the receiver is ready.

2. To pair additional push buttons or receivers, press the melody
   selection/pairing button on the receiver.

Troubleshooting

1. Check the doorbell receiver volume to ensure it is not at the
   lowest setting.

2. Avoid mounting the push button on metal surfaces or near metal
   studs.

3. If issues persist, try relocating the doorbell to a new
   location away from potential interference sources.

Volume Control

1. To adjust the volume, press the volume control button on the
   receiver directly.

2. Hold the melody selection/pairing button for around 5 seconds
   to enter volume adjustment mode.

3. Select the desired volume level by pressing the volume control
   button repeatedly.

FAQs

Q: Is the doorbell suitable for individuals with heart

pacemakers?

A: This product is not suitable for people with heart pacemakers
and should not be used near hospitals or medical facilities.

G Wireless door chime
Features:
1. Wireless Plug-in Doorbell 2. Operating range up to 150 metres on open air. 3. 32 sounds selectable on receiver,4 volume level selectable. 4. With Self- learning technology. 5. Power supply: bell push 1pc CR2032 battery,
receiver: 110V AC power.

Melody selection: Press “melody selection/pairing button” on receiver directly to set melody(There are 32 melodies optional, melody changes by each pressing), choose melody you need.
Clear setting:

Content:
1pc transmitter, 1pc receiver, 1pc CR2032 battery, 2 pcs screws and knot, 1pc double tape, 1pc user manual.
Transmitter unit
Push button

Fig.4
A. Power off receiver, keep holding “melody selection /pairing button” and plug into socket to power on.
“Ding Dong”

“Ding”

First push button

“Ding”

Fig.6

Fig.7 The second push button

B. (Please finish this step within 30 seconds) Press push button needed one time, receiver will make a “Ding” indicate sound (Fig.6) . If there are 2 push buttons needed, please press the second push button successively(Fig.7).

4s

Use flat screw driver to push the hole, to open the cover.

CR2032 3V battery

Method 1 Adhesive patch mounting

Method 2 Screw Mounting

Adhesive Tape

Fig. 1

Receiver unit

Screws Fig. 2

Melody Selection/Pairing Button

B. Wait for around 5 seconds, you will hear 2 “Ding Dong” sounds, which means receiver disconnect with all push buttons.
Pairing Step:
This push button and receiver have been paired in factory. If you need to add an extra push button or receiver, please follow the steps below.
“Ding Dong”
4s

Fig.8
C. Press “melody selection / pairing button” of receiver to confirm action at last, push button and receiver finished pairing(Fig.8).
Trouble shooting
1. Check doorbell receiver volume, make sure it is not in lowest mode.
2. Ensure push button is not mounted on metal, near metal studs or near the floor.

Volume Control

3. Try a new location for the Doorbell. Functional range may be adversely affected by one or more of the following

factors: weather, radio frequency interference, low

Fig.3

US Plug

transmitter battery or obstructions between the transmitter

Fig.5

and receiver.

Volume selection: Press “volume control” button on receiver directly to set

A. Keep holding “melody selection /pairing button” of receiver 4. If the Doorbell and push button(s) do not operate, please

for around 5 seconds, receiver will make “Ding Ding”

clear doorbell setting, then pair push button and receiver

volume (There are 4 levels volume, volume changes by

indicate sound: it entered pairing mode (release “melody

again. Clear setting and pairing steps as above (Fig4 to

each pressing), choose volume you need.

selection/pairing button”) Fig .5.

Fig 7).

Operating temperature

Operating
distance(max) RadioFrequency
RadioTransmitter /receivei Soundlevel(max)

Doorbell From-20to 50 150m 433.050MHz -434.790MHz

PushButton From-20°Cto 50 150m 433.050MHz -434.790MHz

Indooruseonly
Equipmentwithlevelclassll
AIternativeCurrent(AC)

Power(max)

Receiver

Transmitter

=- DirectCurrent(DC

Voltage MaxPower

80dB
RadioTransmission N.A.

N.A.
10mW

090,5-W110V~60Hz

3V 0,5W

RECOMMENDATIONS
1.Thisproductisnotsuitableforpeoplewithheart
pacemakers,anddoesnotadapttotheusenearhospitals andmedicalfacilities.
2.Usethisproductinthefollowingplacesmayshorten
remotecontroldistance,evenfunctionfailure:
-abndelrlepiunsfohrcaenddcroencecirveeterhbauivledinmgetsatrludcotuorresabnlodcwk.indows
-wallhasametalfilminsulationmaterial. -aroundhavemoremetalfurnitureorcabinets. -installthebellpushwithstainlesssteelstripsshade -bellpushequippedwithhiddeninsideawall. 3.Asoneofthefollowingappliancesinusearoundmayalso affecttheproductperformance. -computers,microwaveovens,wirelessintercom,wireless
fcroemqupeonscitye,ahiirgchraffret,qthueenRcFy,woirremleicsrsorweamvoettehceornaptryol,low
apparatus,neartheTVbroadcasting,avarietyofwireless radio,cellphonetowers,highvoltagetransmissionline.
Warning
1.Keepminimumdistance(10cm,wesuggest,could
change)aroundtheapparatusforsuficientventilaltion. 2.Theventilationshouldnotbeimpededbycoveringthe
ventilationopeningswithitems,suchasnewspapers, tablecloths,curtains,etc. 3.Nonakedfiresources,suchaslightedcandles,shouldbe
4.Tphlaicseddooonrcthhiemaeprpeaceraivtuesr.isintendedforindooruseonly.
Donotexposetocontinuousdirectsunlightorhumid
environment-thiswilladverselyaffecttheunit.Maximum 5.oTpheisraatpinpgliatenmcepiesrantuotrien5te0ndCedforusebypersons
(includingchildren)withdisabiltiesorintellectual
disabiltes,orlackofexperienceandknowledge.

FCC COMPLI ANCE STATEMENT: Thi s devi ce compl i es wi t h par t 15 of t he FCC Rul es. Oper at i on i s subj ect t o t he f ol l owi ng t wo condi t i ons: ( 1) Thi s devi ce may not cause har mf ul i nt er f er ence, and ( 2) t hi s devi ce must accept any i nt er f er ence r ecei ved, i ncl udi ng i nt er f er ence t hat may cause undesi r ed oper at i on.
Not e: Thi s equi pment has been t est ed and f ound t o compl y wi t h t he l i mi t s f or a Cl ass B di gi t al devi ce, pur suant t o Par t 15 of t he
FCC Rul es. These l i mi t s ar e desi gned t o pr ovi de r easonabl e pr ot ect i on agai nst har mf ul i nt er f er ence i n a r esi dent i al i nst al l at i on. Thi s equi pment gener at es, uses and can r adi at e r adi o f r equency ener gy and, i f not i nst al l ed and used i n accor dance wi t h t he i nst r uct i ons, may cause har mf ul i nt er f er ence t o r adi o communi cat i ons.
However , t her e i s no guar ant ee t hat i nt er f er ence wi l l not occur i n a par t i cul ar i nst al l at i on. I f t hi s equi pment does cause har mf ul i nt er f er ence t o r adi o or t el evi si on r ecept i on, whi ch can be det er mi ned by t ur ni ng t he equi pment of f and on, t he user i s encour aged t o t r y t o cor r ect t he i nt er f er ence by one or mor e of t he f ol l owi ng measur es:
Reor i ent or r el ocat e t he r ecei vi ng ant enna. I ncr ease t he separ at i on bet ween t he equi pment and r ecei ver . Connect t he equi pment i nt o an out l et on a ci r cui t di f f er ent f r om t hat t o whi ch t he r ecei ver i s connect ed. Consul t t he deal er or an exper i enced r adi o/ TV t echni ci an f or hel p .
War ni ng: Changes or modi f i cat i ons t o t hi s uni t not expr essl y appr oved by t he par t r esponsi bl e f or compl i ance coul d voi d t he user s aut hor i t y t o oper at e t he equi pment .
FCC Radi at i on Exposur e St at ement The devi ce has been eval uat ed t o meet gener al RF exposur e r equi r ement . The devi ce can be used i n por t abl e exposur e condi t i on wi t hout r est r i ct i on.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>