SHUNDE Q-571P Mounted Door Frame Installation Guide
- September 24, 2024
- SHUNDE
Table of Contents
SHUNDE Q-571P Mounted Door Frame
Product Specifications
- Item No.: Q
- Battery: 1 x 12V 23A (Included)
- Installation: Door frame for bell push, table or wall mount for chime
Product Usage Instructions
Battery Replacement:
- Remove the battery cover from the bell push.
- Replace the battery with a 12V 23A battery.
Transmitter Unit:
Use a flat screwdriver to open the cover of the transmitter unit.
Receiver Unit:
The receiver unit features an LED indicator and a push-button for
operation.
Installation
- The bell push can be mounted on the door frame.
- That chime can be put ot a table or mounted on the wall.
To change the battery
- Remove the battery cover.
- Bell Push uses 1 x 12V 23A battery (Included)
Transmitter unit
Receiver unit
FCC
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general
RF exposure requirement.
The device can be used in portable exposure conditions without restriction
Frequently Asked Questions
- What kind of battery does the bell push use?
- The bell push uses 1 x 12V 23A battery, which is included with the product.
- How can I mount the chime?
- The chime can be placed on a table or mounted on the wall for convenience.
- Is the device FCC compliant?
- Yes, this device complies with part 15 of the FCC Rules ensuring minimal interference and acceptance of received interference.