Shenzhen RP8603 Host UM 2 Board Pro User Guide

Shenzhen RP8603 Host UM 2 Board Pro

Product Information

Specifications:

without Glass (Typical)
RP6503 / RP7503 / RP8603| RP6503: 65 / RP7503: 75 / RP8603: 86

Connectors:

• HDMI IN
• HDMI Output
• DP IN
• VGA IN
• PC-Audio IN (3.5 mm audioin)
• Mic IN
• SPDIF (Optical) Audio Output (3.5mm Earphone)
• USB 2.0 (Type A)
• USB 3.0 (Type A) (OPS/ External Follow)
• USB 3.0 (Type A)
• USB Touch Output (OPS/ External pass through MIC/Camera/USB)
• RS232
• LAN (RJ45)
• USB Type-C

System Version:

• Android System

CPU GPU RAM ROM:

• CPU: A73 x 4 + A53 x 4
• GPU: G52 MP8
• RAM: 8GB
• ROM: 64GB

Speaker Type Video/Audio:
Built-in speaker 16W x 2 with 16W subwoofer

Power Requirements:
AC 100V-240V, 50/60 Hz

Product Usage Instructions

Setup:

1. Connect the appropriate cables to the designated connectors based on your input sources.
2. Plug in the power cord to an electrical outlet with the specified power requirements.

Operation:

1. Power on the device using the remote control or the power button.
2. Select the desired input source using the remote control or the on-screen menu.
3. Adjust settings such as volume, brightness, and contrast as needed.

FAQ:

• Q: What is the touch technology used in this product?
  A: The touch technology used is [specify touch technology].

• Q: What is the maximum power consumption of this product?
  A: The maximum power consumption is [specify power consumption].

Specifications

RP6503 / RP7503 / RP8603

Panel

| Size| RP6503: 65″ / RP7503: 75″ / RP8603: 86″
Light Source| DIED
Aspect Ratio| 16:9
Resolution| 3840 x 2160

Pixel Pitch(mm)

| RP6503: 0.37(H) x 0.37(V)

RP7503: 0.43(H) x 0.43(V)

RP8603: 0.49(H) x 0.49(V)

Brightness with Glass (Typical)

| RP6503: 350 (typical)

RP7503: 400 (typical)

RP8603: 400 (typical)

Brightness without Glass (Typical)

| RP6503: 400 (typical)

RP7503: 450 (typical)

RP8603: 450 (typical)

Contrast Ratio (Typical)| 1200:1
Viewing Angle| 178

Touch

| Technology| IR
Touch Method| Finger & Stylus
System| Windows 7/8/10/Vista/Linux/Mac/Android/Wince/ Chrome
Touch Point| up to 40pts touch for Windows; up to 32 pts touch for Android
Minimum Object Size| 2 mm, pen tip is 4 mm/9 mm, supports 2 pens writing with 2 colours simultaneously
Response Time| ≤10 ms
Accuracy| ±1 mm, 90% area
Glass| 3.2 mm thickness, AG, 9H pencil, germ-resistant

Connectors

| HDMI IN| Rear: x 2, Front: x 1 (2.0)
---|---|---
HDMI Output| x 1 (4K@60Hz with audio)
DP IN| x 1
VGA IN| x 1
PC-Audio IN (3.5 mm audio- in)| x 1
Mic IN| x 1
SPDIF (Optical)| x 1
Audio Output (3.5mm Earphone)| x 1
USB 2.0 (Type A)| Rear I/O: x2
USB 3.0 (Type A) (OPS/

External Follow)

| Front: x2 Top: x1
USB 3.0 (Type A)| Wi-Fi dongle: x1 Remote control: x1
USB Touch Output (OPS/ External pass through MIC/ Camera/USB)| Rear: x 2, Front: x 1 (USB 3.0)
RS232| x1

LAN (RJ45)

| OPS: 10M/100M/1000M

Android: 10M/100M/1000M LAN IN x1 / LAN Out x1

USB Type-C| Rear: Data

Front: Data/Power(65W)/Touch/DP

Android System

| System Version| Android 11
CPU| A73 x 4 + A53 x 4
GPU| G52 MP8
RAM| 8GB
ROM| 64GB

Video / Audio

| Speaker Type| Built-in speaker
Output Power| 16W x 2 w/ 16W subwoofer

Power

| Power Requirements| AC 100V-240V, 50/60 Hz
Standby Power| <0.5W

Max Power Consumption (W)

| RP6503: 411.2 W

RP7503: 461.4 W

RP8603: 587.6 W

Wake Up| LAN/HDMI/VGA/DP

Others

| Array Mic| x 8 (Max. pickup range: 8 m)
Light Sensors| Yes

Mechanical

|

Dimension (WxHxD)

| RP6503: 1489.3 x 934.3 x 121.5 mm

RP7503: 1717.1 x 1065.3 x 121.7 mm

RP8603: 1962.4 x 1203.4 x 121.5mm

---|---|---

Dimension (Package) (WxHxD)

| RP6503: 1660 x 1045 x 220 mm

RP7503: 1900 x 1160 x 225 mm

RP8603: 2160 x 1340 x 250 mm

Net Weight

| RP6503: 43±1.5 kg

RP7503: 55.5±1.5 kg

RP8603: 70.2±1.5 kg

Gross Weight

| RP6503: 56±1.5 kg

RP7503: 70±1.5 kg

RP8603: 87±1.5 kg

Thickness of the Machine and Wall Mount| Wall mount (VESA Mount)
VESA for NUC| 100 x 100 mm
Wall-Hanging Screw Spec| M8*25L x 4

VESA

| RP6503: 600 x 400 mm

RP7503: 800 x 400 mm

RP8603: 800 x 600 mm

Accessories

| Power Cord By Region| 3 m x 1
VGA Cable| 3 m x 1
USB Cable (Type A-Type B)_

USB 3.0

| 3 m x 1
Type C Cable| 1.5 m x 1
HDMI Cable| 3 m x 1
Wireless USB Adapter (TDY31)| x 1 (inserted, detachable)
Writing Pen| 2 pcs
Wall Mount| x 1
Remote Control| 1 pcs (BenQ customized)

Features

| Image Setting| Yes
Source/Volume Control| Yes
HDMI Daisy Chain| Yes
RS232 Control| Yes
Sharpness Enhancement| Yes
Proof of Image Retention| Yes
Multi Windows| Yes
HDMI-HDCP| Yes (2.2/1.4)
DP-HDCP| Yes (1.2)
10 Bit Color Processing| Yes

Features (continued)

| Video Wall OSD Setting| No
---|---|---
Ambient Light Sensor| Yes
Total Turn-on Time| Yes
CEC Control| Yes
RTC Function| Yes
FW Update| Yes (USB, OTA)
Freeze/Blank| Yes
Front I/O| Yes
Advanced Menu (Debug Menu)| Yes
Double Lan Bridging| Yes
Public USB Port Auto Switch| Yes
Auto Detect Channel| Yes
All channels can loop out by HDMI| Yes
Button Lock| Yes
Channel Lock| Yes (Signage mode)
Screen Lock| Yes
Smart Sidebar| Yes
BenQ Customer API| Yes

Environment

| Operating Temperature| 0 – 40°C
Operating Humidity| 20 – 80% (without condensation)
Storage Temperature| -10 – 60°C
Storage Humidity| 10 – 60% (without condensation)
Display Orientation| Landscape Only

• Specifications and functions are subject to change without notice.
• The product supports OPS. Refer to BenQ OPS models as below: TEY21-10I5M8S4, TEY21- 10I5M8S5, TEY21-10I7M8S4, TEY21-10I7M8S5, TEY21B-10I5M8S5, TEY21B-10I7M8S5, TEY21Z- 10I5M8S5, TEY21Z-10I7M8S5.
• The OPS should be equipped with fire-resistant enclosures.

Dimensions

Dimensions(RP6503)

Dimensions(RP7503)

Dimensions(RP8603)

Supported input signal resolution

• O: supported
• Blank: not supported

Troubleshooting

• No picture

  • Check the following:
  • Is the display turned on? Check the power indicator of the display.
  • Is the signal source device turned on? Turn on the device and try again.
  • Are there any loose cable connections? Make sure that all cables are connected firmly.
  • Have you chosen an unsupported output resolution on the computer? Refer to the Supported input signal resolution on page 68 to select a supported resolution and try again. Have you chosen an unsupported output resolution on the DVD or Blu-ray disc player? Refer to Supported input signal resolution on page 68 to select a supported resolution
    and try again.

• No sound

  • Check the following:
  • Have you turned on the mute function on the display or the input source device? Turn off the mute function or increase the audio volume level and try again.
  • Are there any loose cable connections? Make sure that all cables are connected firmly.

• The computer input image looks strange

  • Have you chosen an unsupported output resolution on the computer? Refer to the Supported input signal resolution on page 68 to select a supported resolution and try again. Use the Auto function (VGA only) to let the display automatically optimize the display of computer images.
  • If the result of the Auto function is not satisfactory, use the Phase, H Position and V Position functions to manually adjust the image.

• The control panel buttons do not work

  • Have you locked the control panel buttons? Unlock the buttons and try again.

• The remote control does not work

  • Have you locked the remote control function? Unlock the function and try again.
  • Check for incorrect battery orientation.
  • Check for dead batteries.
  • Check your distance and angle from the display.
  • Check whether the remote control is properly being pointed at the display’s remote control sensor window.
  • Check for any obstacle between the remote control and the remote control sensor window.
  • Check that the remote control sensor window is not under strong fluorescent lighting, or in direct sunlight.
  • Check for any devices (computer or personal digital assistant, PDA) nearby that transmit infrared signals which may cause interference to signal transmission between the remote control and the display. Turn off the infrared function of these devices.

• Remote control failure

  • Check whether there are other objects between the remote control and the television remote control receiving window, thus leading to the failure of the remote control.
  • Check whether the battery electrode in the remote control is correct.
  • Check whether the remote control needs to replace the battery.

• Machine automatically shutdown

  • Whether set sleep or not.
  • Check whether there is a sudden power outage.
  • Check whether there is no signal automatic shutdown.

• Signal out of range

  • Check whether the display is set correctly.
  • Check whether the resolution is the best.
  • Adjust line and field synchronization in the menu.

• The background has vertical lines or streaks

  • Select automatic correction in the menu.
  • Adjust the clock and phase position in the menu.

• The image lacks colour, the colour is incorrect

  • Check whether the VGA is not well connected or has a quality problem.
  • Adjust chromaticity and brightness or contrast in the menu.

• A display format that is not supported.

  • Select automatic correction in the menu.
  • Adjust the clock and phase position in the menu.

• Touch function invalid

  • Check whether the touch driver is installed and started.
  • Check whether the size of the article touched is comparable with a finger.

• Touch positioning is not correct

  • Check whether the driver is properly installed and make corrections.
  • Check whether the touchpen is facing the screen.

• No picture and no sound

  • Check whether the machine is started state.
  • Check whether the signal wire is well plugged and whether INPUT corresponds to it.
  • If in internal computer mode, check whether the internal computer is started.

• With horizontal or vertical stripes or image dithering

  • Check whether the signal wire is well connected.
  • Check whether other electronic equipment or power tools are placed around the machine.

• No color, color is weak or image is weak

  • Adjust chromaticity and brightness or contrast in the menu.
  • Check whether the signal wire is well connected.

• With image but without sound

  • Check whether the mute button is pressed for mute.
  • Press VOL+/VOL- to adjust the volume.
  • Check whether the audio line is connected correctly.

• Only one speaker has a sound

  • Adjust the sound balance in the menu.
  • Check whether the computer sound control panel only sets up one sound channel.
  • Check whether the audio line is connected correctly.

• VGA output without sound

  • Check whether to connect the external device with a headphone cable.

Safety warnings and precautions

The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

THIS EQUIPMENT MUST BE GROUNDED
To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring. Extension cords used with the equipment must have three cores and be correctly wired to provide a connection to the ground. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power outlet is grounded or that the installation is completely safe. For your safety, if you are in any doubt about the effective grounding of the power outlet, please consult a qualified electrician.

• The mains plug of the power supply cord shall remain readily operable. The AC receptacle (main socket outlet) shall be installed near the equipment and shall be easily accessible. To completely disconnect this equipment from the AC mains, disconnect the power cord plug from the AC receptacle.
• Do not place this display on an uneven, sloping or unstable surface (such as a trolley) where it may fall and cause damage to itself or others.
• Do not place this display near water, like a spa or pool, or in a position that will allow the splashing or spraying of water onto the display, like in front of an open window where rainwater may enter.
• Do not install this display in a confined space without proper ventilation and air circulation, such as in a closed cabinet. Allow proper space around the display for dissipating heat inside. Do not block any openings and vents on the display. Overheating may result in hazards and electric shock.
• Installation of this display should only be performed by a qualified technician. Failure to install this display properly may cause injuries and damages to the personnel and the display itself. Check the installation regularly and maintain the display periodically to ensure the best working condition.
• Use only the accessories approved or recommended by the manufacturer to mount this display. Using wrong or unsuitable accessories may cause the display to fall and result in serious personal injuries.
• Make sure that the surface and fixing points are strong enough to sustain the weight of the display.
• To reduce the risk of electric shock, do not remove covers. No user-serviceable parts inside. Refer servicing to qualified service personnel.
• To prevent personal injuries, mounting the display or installing desktop stands is required before use.
• Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).

Caution for models with batteries:

• Replacement of a battery with an incorrect type that can defeat a safeguard;
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
• Risk of fire or explosion if the battery is replaced by an incorrect type.

Notice
This product is also designed for an IT power system with a phase-to-phase voltage of 230.

Regulatory statements

This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product.

Accessibility Requirements for Rehabilitation Act of 1973, Section 508
BenQ’s commitment to accessible products allows us to support the government in making accessible technology choices. BenQ’s LCD monitors and projectors are compliant with Section 508 guidelines by including the assistive features below:

• BenQ’s monitors have coloured “Power” indicators. While the indicator shows green, it means that the monitor is using full power. While the indicator shows yellow or amber, it means that the monitor is in suspend or sleep mode and is using less than 2 watts of electricity.
• BenQ’s monitors have a variety of settings of pre-programmed flicker-free timing to make the screen shown on the monitor readily accessible. The default timing setting is automatically turned on every time the monitor is powered up and thus reduces the hassle of user intervention.
• BenQ’s monitors and projectors have options for brightness and contrast adjustments that text and images could be displayed differently to meet the demands of the visually impaired. Other similar adjustments are also available by using the On-Screen Display (OSD) controls on the products.
• BenQ’s monitors and projectors include user-selectable colour controls, such as colour temperature selections (Monitor: 5800K, 6500K and 9300K, Projector: 5500K, 6500K, 7500K and 9300K), with a wide range of contrast levels.
• Firmware of BenQ’s monitors and projectors contain unique product information that helps computer systems identify BenQ products and activate their Plug-and-Play function when connected.
• All BenQ’s monitors and projectors are compatible with the PC99 standard. For example, connectors are colour-coded to help users easily connect products to computer systems correctly.
• Some models of BenQ’s monitors and projectors contain additional USB and DVI ports for connection to more devices such as a special headphone to assist the hearing impaired.
• All BenQ monitors and projectors come with user manuals in digital format. These documents are also available on BenQ’s website (www.BenQ.com). Other types of documents may be available upon request.
• BenQ’s customer service provides answers and assistance to all our customers through phone calls, facsimiles, e-mails, or websites.

EU REACH SVHC Disclosure on Candidate List
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC 1907/2006) is the European Union’s (EU) chemical substances regulatory framework. REACH requires BenQ Corporation to provide customers with sufficient information on Substances of Very High Concern (SVHC) contained in products in concentration above 0.1% weight by weight (w/w) to allow safe use of the product.g 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.

RoHS Statement
This product is compliant with implemented RoHS (Restriction of Hazardous Substances ) type regulations worldwide, including but not limited to China, India, Korea and the European Union.

FCC Statements (for the United States only)
Federal Communications Commission (FCC) Notice (U.S. Only) WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.

CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For the UK only

• The main lead (power cable) on the equipment comes with a moulded plug incorporating a fuse.
• The rating of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved by ASTA or BSI to BS 1362 of the same rating must be used.
• If the plug has a detachable fuse cover, remember to place the fuse cover back if you need to change the fuse.
• Do NOT use a plug without the fuse cover. If the fuse cover is missing, contact your nearest BenQ Customer Service Center for assistance.

UKCA Declaration of Conformity
The object of the declaration described above conforms with the relevant UK harmonisation legislation:

• Electromagnetic Compatibility Regulations 2016
• Electrical Equipment (Safety) Regulations 2016
• The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

For Europe only

CE DOC
DECLARATION OF CONFORMITY

The device complies with the requirements set out in the Council Directives relevant Union harmonisation legislation:

• LVD Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU & (EU) 2015/863
• Ecodesign Directive 2009/125/EC
• WEEE Directive 2012/19/EU
• Turkish ErP (Decision 2010/643)

WEB

WEEE Battery
WEEE directive English Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union.

This symbol on the product or the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

Recycling information:
See https://www.benq.com/en-us/support/recycling/global-recycle.html for details.

For India only

India RoHS

Restriction on Hazardous Substances Statement (India)
This product complies with the “India” E-waste Rule 2016″ and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls or PolyBrominated Diphenyl Ethers in concentrations exceeding 0.1 weight and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule.

E-Waste Declaration for India
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E-Waste and the places to drop off your waste equipment for recycling in India please visit https://www.benq.com /en-us/support/recycling/global-recycle.html.

For Bangladesh only

Bangladesh RoHS Statement
This product shipping to Bangladesh complies with RoHS requirements as prescribed in the Hazardous Waste (E-waste) Management Rules, 2021 by the Government of Bangladesh.

Bangladesh E-waste Management Reminder
Please manage, dismantle, dispose of, or recycle e-waste properly as per the Environmental Protection Rules,1997 to avoid the harm that may be caused to the environment and ecosystem, public interest and public health.

Distributors and recycling centres in Bangladesh:

• Surovi Enterprise Ltd. House 4, Road 16 Sector # 14, Uttara, Dhaka-1230 Bangladesh
• Tel: +8801714077062
• Email: quyyum@surovigroup.net.

Unique Business Systems Ltd.

• Address- House 11, Road 11, Block G Banani, Dhaka | 1213
• Tel: +880-2-5504-2478
• Email: do@ubsbd.com.bd.

Smart Technologies (BD) Ltd

• 271 Tejgaon I/A, Dhaka. H/O: 156 Lake Circus, Kalabagan (2nd Floor) Dhaka 1205, Bangladesh
• Tel: +8801730701915
• Email: khalid.ibrahim@smart-bd.com.

Regulatory statement for RP6503, RP7503, RP8603
Energy Star (applicable only for models bearing the Energy Star logo)

• This product qualifies for ENERGY STAR® in the default mode setting and this is the setting in which power savings will be achieved.
• Changing the default mode picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for an ENERGY STAR® rating. Refer to EnergyStar.gov for more information on the ENERGY STAR® program.

FCC Supplier’s Declaration of Conformity
Responsible Party Name: BenQ America Corp.

• Address: 3200 Park Center Drive, Suite 150, Costa Mesa, CA 92626
• Telephone: 714-559-4900
• Declares below product complies with FCC Part 15 Subpart B
• Product name: Interactive Flat Panel (IFP)
• Model number: RP6503, RP7503, RP8603

Supplementary information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

RoHS Statement
This product is compliant with implemented RoHS (Restriction of Hazardous Substances ) type regulations worldwide, including but not limited to China, India, Korea and the European Union.

EU RoHS

*: PCBA consisted of the bare printed circuit board, soldering and its surface-mounted elements, such as resistors, capacitors, arrays, connectors, chips, etc.

NOTE 1: The “O” indicates that the percentage content of the substance to be calculated does not exceed the reference percentage content of the EU RoHS directive (2011/65/EU & EU 2015/863).

NOTE 2: The “exempted” item means that the specified chemical substance corresponds to the items exempted by the EU RoHS directive (2011/65/EU & EU 2015/863).

Statement for products with NFC module and radar sensor module

For Canada

This device complies with RSS210 of Industry Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Exposure Information
This equipment complies with ISED RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated to ensure a minimum of 20 cm spacing for any person at all times.

Statement for EU
BenQ declares that this product complies with the essential requirements and other relevant provisions of the Radio Equipment Directive (2014/53/EU).

EU RF Exposure Information

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction.

For the UK
The object of the declaration described above conforms with the relevant UK harmonisation legislation:

• Radio Equipment Regulations 2017 (S.I. 2017/1206)

This radio communication device is exempted from license to have and use a radio communication device or set up a radio communication station according to the Notification of NBTC Re: Radio communication devices and radio communication station exempted from license of radio communication according to the Radio Communications Act B.E. 2498 (1955).

NBTC Telecommunication
Supervision for public Call Center 1200 (Free Call).

• Contains FCC ID: 2AQ5R-RDWM15209
• Contains FCC ID: 2AQ5R-RDWM15209
• Contains FCC ID: 2AQ5R-RDWM15209
• Contains IC: 6175A-RP7503NFC

References

• Advancing the World of Health | BD
• Homepage | ENERGY STAR
• Anatel — Agência Nacional de Telecomunicações
• LCD Monitors, Projectors, Speakers and Lighting | BenQ US
• LCD Monitors, Projectors, Speakers and Lighting | BenQ UK
• LCD Monitors, Projectors, Speakers and Lighting | BenQ US
• Download Search | BenQ US
• Global Recycling Information | BenQ US
• Global Recycling Information | BenQ US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>