sygonix SY-6271366 Wi-Fi IP CCTV camera Instruction Manual

sygonix SY-6271366 Wi-Fi IP CCTV camera

Specifications:

• Protection rating: IP65
• Power consumption: max. 10 W
• Dimensions (W x H x D): 105 x 154 x 134 mm
• Weight: approx. 350 g
• Local storage video: microSD card; Class 10; max. 128 GB (FAT32 format)
• Image sensor upper/lower lens: 1/2.8 CMOS sensor
• Focal length: 4 mm
• Frames per second: 25 fps
• Recording (with motion detection activated): Continuous recording until SD card is full (manual recording)
• Video compression: H.265
• Video format: MP4
• Viewing angle lower zoom upper/lower lens: 4x
• Motion detection range: 15 m
• Audio: 2-way

Product Usage Instructions

Mounting the Camera:
Ensure the camera is placed outdoors, not behind glass, and away from LED interference for optimal performance.

Powering and Setting Up:

1. Connect the camera to a power source.
2. Adjust the lens by panning, tilting, and zooming as needed.
3. Insert a microSD card into the slot for local video storage.

Operating Modes:

• Private Mode: Camera head faces downwards when activated.
• Sound Detection: Receive push notifications on the mobile app for detected sounds.
• Locations: Adjust camera settings based on saved location presets.

Local Recording and Storage:

1. To enable local storage, insert a microSD card into the slot after disconnecting the camera from power.

Maintenance and Disposal:

1. Before cleaning, disconnect the product from power and use a dry, lint-free cloth for cleaning.
2. Follow proper disposal methods for electronic devices.

Frequently Asked Questions (FAQ):

• Q: How do I format the microSD card for use with the camera?
  A: The microSD card should be formatted to FAT32 before inserting it into the camera for local video storage.

• Q: What is the maximum capacity microSD card supported by the camera?
  A: The camera supports microSD cards up to 128 GB with a Class 10 rating.

Operating Instructions

PTZ Wi-Fi Dual Lens Outdoor Camera
Item no: 3135683

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

The product is an outdoor pan-tilt-zoom camera (PTZ). Connect the camera to at 2.4 GHz Wi-Fi network to transmit visual data and interact with the camera via the mobile application Tuya Smart Life – Smart Living.

• The product has an IP65 rating and is protected from dust and light rain. If you use the camera outdoors, install it in a sheltered area.
• If you use the product for purposes other than those described, the product may be damaged.
• Improper use can result in short circuits, fires, electric shocks or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.
• USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Features overview

dif- ferent conditions: automatic, IR mode (infrared), full colour.
Motion detection| Motion detection detects moving objects. If motion is detected, the camera sends a push notification via the mobile app.
Motion tracking| The motion tracking sensor makes the camera follow a moving human-like figure.
Two-way audio| Via the microphone and speaker, you can communicate with a person in front of the camera.
Storage| You can store recorded video to an SD card on the camera or in the cloud.

Delivery contents

• Product
• 2x Screws
• 2x Dowels
• Power adapter
• Operating instructions

 Description of symbols

The following symbols are on the product/appliance or are used in the text:
Read the operating instructions carefully.
The symbol with the exclamation mark in the triangle is used to indicate important information in this document. Always read this information carefully.
Risk of electric shock!

Safety

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.

Power adapter

• Do not modify or repair mains supply components including mains plugs, mains
  cables, and power supplies. Do not use damaged components. Risk of death by
  electric shock!

• Connect the appliance to a wall socket that can be accessed easily.

• As power supply, only use the supplied mains adaptor.

• Only connect the power adaptor to a normal mains socket connected to the public supply.

  • Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.

• Never connect or disconnect power adaptors if your hands are wet.

• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.

• For safety reasons, disconnect the power adaptor from the mains socket during storms.

• Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:

  • Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
  • Unplug the power adapter from the mains socket.
  • Use a new power adapter of the same design. Do not use the damaged adapter again.

• Ensure that cables are not pinched, kinked or damaged by sharp edges.

• Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Installation
When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

Notes on surveillance

Privacy

• It is the responsibility of the user to be aware of all applicable laws and regulations that prohibit or limit the use of cameras, and to comply with the applicable laws and regulations.
• Recording and circulating an image of an individual may constitute an infringement of their privacy for which you may be held liable.
• Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium.
• Do not circulate degrading image(s) or one which could undermine the reputation or dignity of an individual.

Surveillance cameras

• In your country it may be a legal requirement to display a warning when using surveillance cameras on your property. In such cases it is important to display a warning sticker where potential intruders can see it.
• You should not point cameras where surveillance extends to public areas, and video recordings should not identify people in a public space

Product overview

| Component| Description/Action
---|---|---
1| Wi-Fi antenna|

•     Direct the antennas upwards for best reception.

2| Installation bracket|
3| USB-C® power connector|

• Connect the USB-C® power adaptor to power the camera.

4| Adjustable lens|

• Pan, tilt and zoom the lens via the mobile app.

5| Speaker|

• Speak to a person standing in front of the camera via the mobile app.

6| Compartment cover|
7| MicroSD card slot|

• Install a MicroSD card to store recorded video loc- ally on the camera.

8| Reset button|

• Push and hold the button to reset the camera.

9| Light sensor| The light sensor controls how the camera records in low light conditions.
10| IR LEDs and Light LEDs|
11| Microphone| If you have the mobile app open, a person can use the microphone to speak to you.
The sound detection function uses the microphone to detect sound and notify you via push notification.
12| IR LEDs and Light LEDs|
13| Fixed lens|

• Adjust the lens by manually rotating the camera body.

 Installation

Choosing a location
Consider the following when choosing a location for the camera:

• For outdoor use, mount the camera in a sheltered area.
• The mounting location constrains the camera recording angle and motion detection angle.
• Do not place the camera behind glass. Glare from LED lights might overexpose the camera image.
• The power adaptor must be protected from water and dust.
• Make sure there is a suitable power outlet for the power adaptor near the mounting location.
  • Do not extend the power supply cable.
• Check that the camera is within range of the Wi-Fi access point.

Mounting
Preconditions:

• Check that the provided screws are appropriate for the surface material. If in doubt consult a professional.
  1. Use the mounting holes on the back of the product as a template to mark where to drill.
  2. Attach the product using the supplied dowels and screws.
• Make sure the product is securely mounted before letting go.

 Mobile app control

Download application
Compatible AndroidTM and iOS apps are available from their respective app stores.

Pairing camera and mobile app
Important:

• The product is compatible only with 2.4 GHz networks.
• Enter the exact network name (case sensitive).
• Only alphanumeric Wi-Fi passwords are supported.
• Connect the mobile device to the same Wi-Fi network the product will connect to.

If you are giving the product to a third party you did not “Share Device” with, you may need to “Remove Device” through the application before they can link it to their account.

1. Remove the compartment cover.
2. Press and hold the reset button until your hear the reset confirmation voice message.
3. Connect the mobile device to the Wi-Fi network to which you connect the camera.
4. Open the mobile app and add a new device of type “Wi-Fi PTZ camera”.
5. Follow the on-screen instructions to pair the camera.
6. Attach the compartment cover to seal the compartment.
   • The camera is ready for configuration and operation.

Mobile app controls

| Function| Description/Action
---|---|---
A1| Private mode| If activated: The camera head points to the ground.
A2| Sound detection| If activated: A push notification is sent to the mobile app if sound is detected.
A3| Motion tracking| If activated: The camera follows human-like objects during video recording.
A4| Sites|

• Store camera settings such as camera angle for differ- ent recording locations/situations.
• Tap a stored site to adjust the camera using the stored site settings.

Local recording and storage

To store video locally on the camera, you must install a MicroSD card into the camera. The camera detects the presence of the MicroSD card automatically and stores recordings on the card.
Note:
Local storage and cloud storage can be used simultaneously.

Installing/removing MicroSD card
By installing a MicroSD card, you enable local storage.

Notes:

• MicroSD cards must be formatted with FAT32.
• MicroSD cards must not meet the minimum and maximum storage capacities stated in the “Technical data”.
  • Disconnect the camera from the power supply.
  • (To install) Slide the MicroSD card into the card slot until it clicks into place.
  • (To remove) Release the MicroSD card by carefully pushing it down until you hear a click. Remove the MicroSD card.
  • Close the MicroSD card access with the cover. Make sure the cover seals the access to prevent water from entering the access.

Recording video locally
Whenever the camera detects motion and a MicroSD card is installed in the camera, recorded video is stored on the MicroSD card.

Keep the following in mind:

• If the MicroSD card is full, the earliest recording is automatically overwritten to facilitate continuous recording.
• Before you remove the MicroSD card, switch the camera off or disconnect it from the power supply to prevent data corruption in case recording is in progress.

 Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
  • They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.
  • Disconnect the product from the power supply.
  • Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste.

Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on
our website)

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.

• Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

 Technical data

Application

• Application name………………………. Smart Life – Smart Living

General

• Ingress protection……………………… IP65
• Input ……………………………………….. 5 V/DC, 2 A via USB-C®
• Power consumption…………………… max. 10 W
• Operating/storage conditions………. -20 to +40 °C
• Dimensions (W x H x D) …………….. 105 x 154 x 134 mm
• Weight (approx.)……………………….. 350 g

Video

• Local storage……………………………. MicroSD card; class 10; max 128 GB
• Formatting: FAT32
• Image sensor upper/lower lens …… 1/2.8″ CMOS sensor
• Focal length: 4 mm
• Resolution………………………………… HD 1920 x 1080p 2 Mega pixels
• Frames per second……………………. 25 fps
• Recording (motion activated)………. Continuous loop
• File record size …………………………. 15s (motion detection mode)
• Until SD card full (manual recording)
• Video compression……………………. H.265
• Video format …………………………….. MP4
• Viewing angle upper lens …………… Horizontal: 70°; Vertical: 60°
• Viewing angle lower lens……………. Horizontal: 70°; Vertical: 60°; Pan: 355°; Tilt: 90°
• Upper/lower lens zoom………………. 4x
• Motion detection range………………. 15 m
• Night vision illumination……………… 8x IR LEDs; 8x white LEDs
• Night vision range……………………… max. 50 m (with IR and white LEDs on at <0.01 lx)

Audio

• Audio ………………………………………. 2-way

Wireless connectivity

• WLAN ……………………………………… IEEE 802.11 b/g/n, 2.4 GHz
• Frequency range ………………………. 2.412 – 2.484 GHz
• Transmission distance……………….. max. 60 m (open space)
• Transmission power ………………….. max. 17 dBm

Power adaptor

• Input voltage ……………………………. 100 – 240 V/AC
• Input AC frequency …………………… 50/60 Hz
• Output voltage …………………………. 5 V/DC
• Output power …………………………… max. 10 W
• Output connector………………………. USB-C®

Data according to EU regulation 2019/1782

Output voltage
Output current Output power| 5.0 V/DC, 2.0 A,10 W
Average active efficiency| 83.4 %
Efficiency at low load (10 %)| —
No-load power consumption| 0.06 W

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in  electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
3135683_V2_0624_jh_mh_en 81064794660328971-2 I10/O2 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>