1510 x 760mm Rose Freestanding Cian Bath

Product Information

Specifications

• Product Name: Solid Surface Baths

• Finishes Available: High Gloss Finish, Euro
  Silk Matt Finish

• Material: Solid Surface

• Usage: For bathing purposes

Product Usage Instructions

Care and Maintenance

When you receive your Solid Surface Bath, it will be covered
with protective packaging materials for transport purposes. Follow
these steps for care and maintenance:

1. Remove all the packaging materials covering the bath.
2. Check carefully for any damages immediately. Claims for damages
   or inaccuracies should be reported within 48 hours of receipt or
   installation.

Cleaning Instructions

To maintain the high gloss or Euro Silk Matt finish of your
Solid Surface Bath, follow these cleaning instructions:

1. Regularly clean the surface with a mild soap and water
   solution.

2. Avoid using abrasive cleaners that may damage the finish.

3. If there are any stubborn stains, use a non-abrasive cleaner
   recommended for solid surface materials.

Damage Prevention

To prevent damage to your Solid Surface Bath, follow these
guidelines:

1. Avoid placing hot items directly on the surface. Use trivets or
   heat-resistant mats.

2. If scratches occur, a burnishing compound can be used to remove
   them.

Frequently Asked Questions (FAQ)

Q: How do I remove scratches from the Solid Surface Bath?

A: If scratches occur, you can use a burnishing
compound to remove them. Follow the manufacturer’s instructions for
best results.

Q: Can I use abrasive cleaners on the bath surface?

A: No, it is recommended to avoid using
abrasive cleaners as they may damage the finish of the bath. Use
mild soap and water for regular cleaning.

Solid Surface Baths
CARE AND MAINTENANCE
When receiving your Bath, the unit will be covered with protective packaging materials for transport purposes. Remove all the packaging material covering the bath, checking carefully for any damages. We will not accept any claims for damages or inaccuracies 48 hours after receipt of goods or installation.
HIGH GLOSS FINISH
· To preserve the polished surface, clean your bath with a soft cloth and warm soapy water. · As a weekly cleaner we recommend any suitable sanitary ware liquid cleaner. Rinse the
surface clean immediately afterwards. Do not allow any liquid cleaner to stand for extended periods as this may stain the bath depending on the type of cleaning product. · Do not use powders, pastes, crème cleaners, thinners or dry cleaning fluids. · Stubborn marks and fine scratches may be removed using 1500-2000 grit water paper. Follow this by polishing with a car burnishing compound and soft cloth. · Should you need to disinfect your bath, a weak bleach solution may be left to soak for 20-30 minutes.
EURO SILK MATT FINISH
· Clean your bath with a soft cloth and warm soapy water. · As a weekly cleaner we recommend any suitable sanitary ware liquid cleaner. Rinse the
surface clean immediately afterwards. Do not allow any liquid cleaner to stand for extended periods as this may stain the bath depending on the type of cleaning product. · Stubborn marks and fine scratches may be removed with the Scotchbrite pad provided with your bath. · Should you need to disinfect your bath, a weak bleach solution may be left to soak for 20-30 minutes.
DAMAGE PREVENTION
· Always run hot and cold water simultaneously into your bath or vanity. Geyser settings should not exceed a maximum temperature of 60°C.
· Deliver water (mixed hot and cold) to the lowest point of the bath which is at the waste area · Avoid contact with strong chemicals and solvents (stain removers, nail varnish removers, Etc) · Wipe away any chemical spillages ie. hairdye, as soon as possible to avoid potential staining. · When coloured essential oils are used, first test that the colour will not stain your bath. If it
does, a burnishing compound will remove it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>