plumbworld PWLPRADC03 Large Radiator Cover with 3 Drawers Instruction Manual
- May 15, 2024
- plumbworld
Table of Contents
Big
brands, small prices.
Large Radiator Cover
with 3 Drawers Assembly instructions- Please keep
for future reference
PWLPRADC03
PWLPRADC06
PWLPRADC09
**** Safety and Care Advice
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- Keep children and animals away from the work area small parts are a choking hazard if swallowed.
- Make sure you have enough space to layout the parts before starting.
- This product has been constructed to be used in the domestic environment only and not for commercial purposes.
- Assemble the item as close to its inal position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your loor.
- The surface should be protected from liquids, heat or cold by using a coaster or mat. The surface is not water resistant and may be damaged or discoloured if not protected.
- We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
- Parts of the assembly will be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
Care and maintenance
- Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
- From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
- This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Additional Guidance
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightened properly.
WARNING!
IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL
ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture tipping over.
To help prevent this item of furniture tipping over:
- Use the wall attachment device provided.
- Do not let children climb or hang on drawers, doors or shelves.
- Place the heaviest items in the lower drawers or shelves.
- Do not place TV’s or other heavy objects on top of this product, unless it has been specifically designed to support them.
- Never open more than one drawer at a time.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a
qualified tradesperson.
Always ensure the wall to be drilled is free from hidden electrical wires,
water and gas pipes.
Fittings
Please check that you have all the fittings listed below:
NOTE: The quantities below are the correct amount to complete the
assembly. In some cases more fittings may be supplied than required.
Tools required
| Crosshead screwdriver (small & medium)| | Eye protection (when using a
hammer)
---|---|---|---
| Flathead screwdriver (small & medium)| | Power drill
| Ruler/tape measure| | Mallet
Panels
-
Top panel x1
(150(w)cm x 19(d)cm) -
Left side panel x1
(94.5(h)cm x 18(d)cm) -
Right side panel x1
(94.5(h)cm x 18(d)cm) -
Centre panel x2
(18(d)cm x 12(h)cm) -
Middle panel x1
(145.5(w)cm x 18(d)cm) -
Face panel x1
(145.5(w)cm x 75(h)cm) -
Drawer front panel x3
(46.8(w)cm x 13(h)cm) -
Drawer left side panel x3
(15(d)cm x 10.7(h)cm) -
Drawer right side panel x3
(15(d)cm x 10.7(h)cm) -
Drawer bottom panel x3
(45.4(w)cm x 14.7(d)cm) -
Drawer back panel x3
(44.4(w)cm x 10.7(h)cm)
|
---|---
For how to use camlocks watch our video:
www.youtube.com/watch?v=tBMdYxtpu88
|
---|---
|
|
Using camlocks
Step 1 Connect the male camlock as directed in the assembly instructions
using a screwdriver. Step 2 Insert the female camlock as shown in the
instructions.
Note: Ensure that the arrow on the top of the camlock points towards the
entry hole for the male camlock. Step 3 Push the male camlock into every
hole. Step 4
Turn the female camlock with a screwdriver. You should feel a click when the
camlock is locked in place. The joint is now secure. For how to use camlocks
watch our video:
www.youtube.com/watch?v=tBMdYxtpu88
A Guide to Wall Mounting & Fixings
Important note:
If plastic wall plugs (rawl plugs) are supplied with your product, eg:
- these are suitable for use in masonry walls
lf you are in any doubt about the correct wall plugs for your wall, seek
professional advice.
Failure of the product due to using the incorrect fixings is the
responsibility of the installer.
Types of walls
Important: when drilling into walls always check that there are no hidden
wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for
supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
- General rule: always use a larger screw and wall plug if you are not sure.
- Ensure you use the recommended drill bit to match the wall plug and hole size.
- Ensure you drill the hole horizontally; do not force the drill or enlarge the hole.
- Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
- Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
You can use one of the following types of wall plug if your walls are made of
brick, breeze block, concrete, stone or wood.
No. 1 “General Purpose” wall plug
Generally aerated blocks should not be used to support heavy loads, use a
specialist fitting in this case.
For light loads, general purpose wall plugs can be used.
No. 2 “Plasterboard” wall plug For use when attaching light loads onto
plasterboard partitions.
No. 3 “Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors.
No. 4 “Cavity Fixing – Heavy Duty” wall plug For use when fitting or
supporting heavy loads such as shelving, wall cabinets and coat racks.
No. 5 “Hammer Fixing” wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it to be
fixed to the wall rather than the plasterboard.
Always check the fixing is secure to the retaining wall.
No. 6 “Shield Anchor” wall plug – heavy load For use with heavier loads such
as TV and HiFi speakers and satelite dishes etc.
Care & Maintenance
Safety: Always check the fitting and location to ensure your safety in
and around the home.
Fitting: From time to time check the fitting to ensure the wall plugs or
screws do not become loose.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>