plumbworld PWLPRADC13 Storage Radiator Cover with Drawer Rattan Black Instruction Manual
- June 2, 2024
- plumbworld
Table of Contents
- plumbworld PWLPRADC13 Storage Radiator Cover with Drawer Rattan Black
- Safety and Care Advice
- Care and maintenance
- Additional Guidance
- Fittings
- Tools required
- Panels
- INSTALLATION INSTRUCTION
- Using camlocks
- A Guide to Wall Mounting & Fixings
- Types of walls
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
plumbworld PWLPRADC13 Storage Radiator Cover with Drawer Rattan Black
Safety and Care Advice
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
- Keep children and animals away from the work area small parts are a choking hazard if swallowed.
- Make sure you have enough space to lay out the parts before starting.
- This product has been constructed to be used in the domestic environment only and not for commercial purposes.
- Assemble the item as close to its initial position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your loor.
- The surface should be protected from liquids, heat or cold by using a coaster or mat. The surface is not water resistant and may be damaged or discoloured if not protected
- We do not recommend the use of power drills/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
- Parts of the assembly will be easier with 2 people.
- Dispose of all packaging carefully and responsibly
Care and maintenance
- Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
- From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten
- This product should not be discarded with household waste. Take to your local authority waste disposal centre
Additional Guidance
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightened properly.
WARNING!
IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL
ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent this item of furniture tipping over
Use the wall attachment device provided.
- Do not let children climb or hang on drawers, doors or shelves.
- Place the heaviest items in the lower drawers or shelves.
- Do not place TV’s or other heavy objects on top of this product, unless it has been specifically designed to support them.
- Never open more than one drawer at a time
An attachment device is provided with your product, however you will need to source suitable fixings for your wall type. If in doubt, please consult a qualified tradesperson. Always ensure the wall to be drilled is free from hidden electrical wires, water and gas pipes
Fittings
Please check that you have all the fittings listed below
NOTE: The quantities below are the correct amount to complete the
assembly. In some cases, more fittings may be supplied than required
Tools required
Panels
Panel List
INSTALLATION INSTRUCTION
For how to use cam locks watch our video: www.youtube.com/watch?v=tBMdY×tpu88
Using camlocks
- Step 1 Connect the male camlock as directed in the assembly instructions using a screwdriver
- Step 2 Insert the female camlock as shown in the instructions. Note: Ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock
- Step 3 Push the male camlock into every hole
- Step 4 Turn the female camlock with a screwdriver. You should feel a click when the camlock is locked in place. The joint is now secure
A Guide to Wall Mounting & Fixings
Types of walls
You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood
- No. 1 “General Purpose” wall plug Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general-purpose wall plugs can be used.
- No. 2 “Plasterboard” wall plug For use when attaching light loads onto plasterboard partitions
- No. 3 “Cavity Fixing” wall plug for use with plasterboard partitions or hollow wooden doors
- No. 4 “Cavity Fixing – Heavy Duty” wall plug For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks
- No. 5 “Hammer Fixing” wall plug for use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall
- No. 6 “Shield Anchor” wall plug – heavy loads For use with heavier loads such as TV and HiFi speakers and satellite dishes etc.
Care & Maintenance
- Safety: Always check the fitting and location to ensure your safety in and around the home.
- Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.
For how to use camlocks watch our video: www.youtube.com/watch?v=tBMdY×tpu88