plumbworld 1520mm White Horizontal Style Instruction Manual
- June 2, 2024
- plumbworld
Table of Contents
plumbworld 1520mm White Horizontal Style
Specifications
| Part | Quantity | Dimensions |
|---|---|---|
| Panel 1 | 1 | 803±10×12mm |
| Panel 3 | 4 | 581±10×12mm |
| Panel 4 | 1 | 803±10×12mm |
| Panel 5 | 14 | 641±7×9mm |
| Panel 6 | 1 | 803±68×12mm |
| Panel 7 | 1 | 760±9×12mm |
PARTS
Tools Needed
- Churn drill
- hammer
- Cross screwdriver
Please note that there is no No.2 panel.
Assembly Components
-
Ax3
3 pieces -
Bx20
20 pieces -
Cx22
22 pieces -
Dx18
18 pieces -
Ex28
28 pieces -
Fx6
6 pieces -
Gx6
6 pieces -
Hx2
2 pieces -
Ix8
8 pieces -
Jx1
1 piece
Step-by-Step Assembly Instructions
- Using a screwdriver, screw in the B screws securely. Please do not overtighten as it may cause wood to splinter.
- The small arrow on the C Cam Locking Screw should be facing the B screws extending from the panel.
- Use screwdriver to tighten securely, but avoid over-tightening, as screws may protrude through the panel.
- Keep the panels 9 & 10 on the same level when moving or the screws may protrude through the panels.
Assembly Diagram Description
Illustrations show the furniture in various stages of assembly, from individual panels to the fully constructed form. Each step indicates the correct placement of screws and panels, with detailed notes on the orientation of the Cam Locking Screws and the importance of panel alignment to prevent damage during assembly.
FAQ
What should I do if I cannot find panel No.2?
Please note that there is no No.2 panel included in this package. Proceed with the available panels as instructed.
How tight should I screw in the B screws?
Screw in the B screws securely but do not overtighten to prevent wood splintering and screws protruding through the panel.
What is the purpose of the small arrow on the C Cam Locking Screw?
The small arrow on the C Cam Locking Screw should point towards the B screws to ensure proper locking when assembled.
Is it necessary to keep the panels level during assembly?
Yes, it is crucial to keep panels 9 & 10 level during movement to avoid the screws from protruding through the panels.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>