plumbworld PWLPRADC01 Mini Radiator Cover with Drawer Instruction Manual

plumbworld PWLPRADC01 Mini Radiator Cover with Drawer

Specifications :

• Product Name: Mini Radiator Cover with Drawer
• Models: PWLPRADC01, PWLPRADC04, PWLPRADC07
• Issue Date: 25/11/22

Product Information

The Mini Radiator Cover with Drawer is a stylish and functional piece of furniture designed to cover and protect your radiator while providing extra storage space with a convenient drawer. The product comes with all necessary fittings and panels for easy assembly.

Product Usage Instructions

Assembly Instructions:
Follow these steps to assemble the Mini Radiator Cover with Drawer:

1. Start by connecting the male camlock using a screwdriver as per the assembly instructions.
2. Insert the female camlock ensuring the arrow on top points towards the entry hole for the male camlock.
3. Push the male camlock into each hole.
4. Turn the female camlock with a screwdriver until you feel a click, indicating that the camlock is securely in place.

Product Usage:
Once assembled, attach the product to the wall using the wall attachment device provided to prevent overturning. The radiator cover can be used to conceal your radiator and enhance the aesthetics of your room while the drawer offers storage space for small items.

FAQ:

1. Q: Do I need to use the wall attachment device provided?
   A: Yes, it is essential to prevent overturning and ensure the safety of the product.

2. Q: Can the drawer be fully removed?
   A: Yes, the drawer can be fully removed for cleaning or maintenance purposes.

Mini Radiator Cover with Drawer

Assembly instructions- Please keep for future reference

• PWLPRADC01
• PWLPRADC04
• PWLPRADC07

Safety and Care Advice

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

• Keep children and animals away from the work area small parts are a choking hazard if swallowed.
• Make sure you have enough space to layout the parts before starting.
• This product has been constructed to be used in the domestic environment only and not for commercial purposes.
• Assemble the item as close to its inlay position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your lord.
• The surface should be protected from liquids, heat or cold by using a coaster or mat. The surface is not water resistant and may be damaged or discoloured if not protected.
• The use of power drill/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.
• Parts of the assembly will be easier with 2 people.
• Dispose of all packaging carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
• From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
• This product should not be discarded with household waste.  Take to your local authority waste disposal centre

Additional Guidance

• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
• Regularly check and ensure that all bolts and fittings are tightened properly.

WARNING!
IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent this item of furniture tipping over:

• Use the wall attachment device provided.
• Do not let children climb or hang on drawers, doors or shelves.
• Place the heaviest items in the lower drawers or shelves.
• Do not place TV’s or other heavy objects on top of this product, unless it has been specifically designed to support them.
• Never open more than one drawer at a time.
• An attachment device is provided with your product, however you will need to source suitable fixings for your wall type. If in doubt, please consult a qualified tradesperson.
• Always ensure the wall to be drilled is free from hidden electrical wires, water and gas pipes.

Fittings

Please check that you have all the fittings listed below

NOTE: The quantities below are the correct amount to complete the assembly. In some cases  more fittings may be supplied than required

Tools required

Panels

INSTALLATION STEPS

Using camlocks

1. Step 1
   Connect the male camlock as directed in the assembly instructions using a screwdriver.

2. Step 2
   Insert the female camlock as shown in the instructions.
   Note: Ensure that the arrow on the top of the camlock points towards the entry hole for the male camlock.

3. Step 3
   Push the male camlock into every hole.

4. Step 4
   Turn the female camlock with a screwdriver.
   You should feel a click when the camlock is locked in place.
   The joint is now secure.

• For how to use camlocks watch our video:
  • www.youtube.com/watch?v=tBMdYxtpu88 

A Guide to Wall Mounting & Fixings

Important note:

• If plastic wall plugs (rawl plugs) are supplied with your product, eg:
• • these are suitable for use in  masonry walls
• If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
• Failure of the product due to using the incorrect fixings is the responsibility of the installer

Important: when drilling into walls always check that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.

Hints:

1. General rule: always use a larger screw and wall plug if you are not sure.
2. Ensure you use the recommended drill bit to match the wall plug and hole size.
3. Ensure you drill the hole horizontally; do not force the drill or enlarge the hole.
4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
5. Ensure wall plugs are well fitted and are a tight fit in the drilled hole.

Types of walls
You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood.

1. No. 1 “General Purpose” wall plug
   • Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general purpose wall plugs can be used.
2. No. 3 “Cavity Fixing” wall plug
   • For use with plasterboard partitions or hollow wooden doors.
3. No. 5 “Hammer Fixing” wall plug
   • For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall.
4. No. 2 “Plasterboard” wall plug
   • For use when attaching light loads onto plasterboard partitions.
5. No. 4 “Cavity Fixing – Heavy Duty” wall plug
   • For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks.
6. No. 6 “Shield Anchor” wall plug – heavy loads
   • For use with heavier loads such as TV and HiFi speakers and satelite dishes etc.

Care & Maintenance

• Safety: Always check the fitting and location to ensure your safety in and around the home.
• Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>