FiiO BTR13 Bluetooth Headphone Amplifier Instructions

September 25, 2024
Fiio

FiiO Logo Bluetooth DAC and Headphone Amplifier

Buttons and ports labeled

FiiO BTR13 Bluetooth Headphone Amplifier

Operation explained

Power on: Hold the Power button for about 3s while the device is off.
Power off: Hold the Power button for about 5s while the device is on;
Reset: Short press the Power button for about 10s at any state.
Turn off/on the display: When the device powers on and is not on the menu page, short press the Power button.
Activate menu: When the device powers on and not on the menu page, hold the Power button for about 2s.
Exit menu: On the menu page, hold the Power button for about 2s.
Return to the previous menu step by step: On the menu page, short press the Power button.
Switch submenus: Short press the Volume+/- button on the menu page.
Confirm menu: Short press the Multifunction button on the menu page.
Bluetooth pairing mode (not on the menu page):

  1. If the device is never paired: After the device powers on, it will automatically enter the pairing mode with the display showing “Pairing’;
  2. Force the device to enter pairing mode: After the device is successfully connected, hold the Multifunction button for about 55 until the display shows “Pairing”.

Operation instructions after a successful pairing with a mobile phone through Bluetooth (not on the menu page): Activate Siri/voice assistant: Double press the Multifunction button.
Play/Pause/Answer/Hang up/Cancel a phone call: short press the Multifunction button.
Reject a phone call: Hold the Multifunction button for about 25 when there is an incoming phone call.
Volume up/down: Short press the Volumet/- button.
Switch tracks: Hold the Volume+/- button for about 2s.
Clear pairing: Hold the Volumer+ and Volume- buttons at the same time for about 5s when the device is on.
How to connect the BTR13 to two Bluetooth devices simultaneously:
After a successful pairing with device 1, hold the Multifunction button for about 5s to enter the pairing mode again. Search for “BTR13” on device 2and pair it with the BTR13. Back to device 1, select “FIIO BTR13” in the Bluetooth device list and reconnect them; or, after connecting the BTR13 with device 1 successfully, reenter the pairing mode and connect to device 2. After a successful pairing with device 2, short press the Multifunction button to reconnect to device 1; or, restart the BTR13 after a successful pairing with device 2, so the BTR13 can be connected to two Bluetooth devices simultaneously.
Switch modes:
Toggle the mode switch to select the mode you want to use.

PC mode: Toggle the switch to the top. The BTR13 will enter the USB decoding mode for desktop  devices, and can be powered through USB.

BT mode: Toggle the switch to the middle. The BTR13 will enter the Bluetooth receiving mode, and can be powered through USB.

PHONE mode: Toggle the mode switch to the bottom. The BTRI3 will enter the decoding mode S phones, and will be disabled from USB charging (The device will be force

Introduction to main menus

Charging protection

Connect to the computer via USB for decoding
When using the BTR13 in UAC mode, there is no need to install drivers on the computer. Simply connect the BTR13 to the computer and select the corresponding output device.
Notes and precautions
t’s recommended to charge the device with a standard 5V charger.
Please do not place the device in circumstances of excessive high/low temperature (above 45°C or below 0°C).
Please keep the device away from liquids to avoid any damage to it.
If the device is to be left unused for a long time, please recharge it periodically to preserve s battery life.
Please adjust the volume to a suitable level before putting on headphones, 5o as to protect your hearing.
Please do not expose the battery to high temperatures; do not use the battery if it is soaked in water or severely swollen; do not disassemble, bump and squeeze the battery, or drop it into fire.
If using a third-party power adapter for power supply, please use a standard and certificated one.
List of items included

  • BTRI3
  • Type-Cytotype-Ccable
  • Lanyard
  • Warranty card
  • Quick

To learn more

Due to continuous improvement, every specification and design is subject to change at any time without further notice.
Hereby, Guangzhou FIO Electronics Technology Cold declares tha this device i in compliance with Dirctive 2014/53/EU. The ful text of the EU declaration of conformity i available at: htpp://www.flio.com/doc


Function Frequency Maximum output power
Bluetooth 2402-2480MHz 7.1dBm

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. Internal/Supplied Batteries:
This symbol on the battery indicates that the battery is to be collected separately. This battery is designed for separate collection at an appropriate collection point. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Any Changes or modifications not expressly approved by the party responsible for compliance could vid the users authority o operate the equipment.

FiiO Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals