FIIO FT5 90mm Planar Magnetic Headphones User Guide

Quick Start Guide

Product Instructions

How to usethe FT5

1. Earpad
2. Headphone port
3. 3.5mmDCplug
4. 3.5mm swappable audio plug
5. 4.4mm swappable audio plug
6. 6.35mm audio adapter
7. XLR-4 balanced audio adapter

–Insert the 3.5mm DC plugs® into the headphone ports@ of the FT5. Be careful to distinguish the “L” (left) and “R” (right) markings and ensure proper wearing.
–Apply an appropriate interchangeable audio plug to the FT5 for connection with the audio source.
Note: Pictures are for reference only. The actual product may vary.

Instruction for swappable headphone plug

1. Rotate the female end in a clockwise manner until the female end can be pushed front and back to unlock them.
2. Pull the male end to detach the two connectors. (Objects that can generate greater friction like tissues or a strip of cloth can be used to help to detach.)
3. Align the male and female end of the connector, ensuring the notch of themaleendisin parallel with the raised dot that’sinside the female end. Plug the male end until it is in an appropriate position.
4. Rotate the female end in an anticlockwise manner until it is tight tolock them.

How to replace earpads

Detach earpads: Hold the headphones with one hand. Use the other hand to grasp the inner holder (around the back of the earpad) from the middle to the inside, and then apply force to pull the earpad apart in a vertical manner (do not pull the outer cover of the earpad directly).Attach earpads: Hold the headphones with one hand. Grasp the inner holder on the earpad with the other hand. Align the two plastic dowels (on the inner holder of the earpad) to the two locating holes (at the bottom of the headphone frame), and then press them until the earpad snapsin a proper position.
Note: Pictures are for reference only. The actual product may vary.

Important Safety Instructions

• Please read thisinstruction manual carefully before using the product.
• Please always include this manual when passing the product on.
• Please do not use an obviously defective product.

Preventing damage to health and accidents

• Please take care to prevent hearing damage caused by high volume levels and long time use.
  Make sure the volume of the audio device is set to a relatively low level before use.

• The product generates strong permanent magnetic fields that could cause interference to cardiac pacemakers, implanted defibrillators (ICDs) and other implants.
  Always maintain a distance of at least 10 cm between the product component and the cardiac pacemakers, implanted defibrillators or otherimplants.

• Please keep the product, accessories and packing parts out of reach of children to prevent accidents and choking hazards.

• You may be unable to hear the sounds around you when wearing headphones.
  Foryour safety, it’s not recommended to use headphones in dangerous environments.

Preventing damage to the product

• Please do not place the product in extreme environments for a long time (humid, strong-magnetic, high-temperature, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
• Please place the product naturally when not in use, and unplug it from the audio device. Please do not keep the product in an expansion state for a long time when not in use, as this can widen the headband and reduce the contact pressure of the headphones (like affecting the wearing and listening experience).
• Only use attachments, accessories and spare parts supplied or recommended by FiiO.
• Only use a soft and dry cloth to clean the product. Do not use alcohol, thinner or other organic solvents.
• Please use the product with care and place it in a clean and dust-free environment.
• Please do not disassemble the headphones on your own.

Authenticity Checking

1. 5Scratch off the coating on the product package to get a 20-bit security code.
2. Go to FiiO official website at www.fiio.com. Click the ‘Check Authenticity’ icon in the upper-right corner, and then enter the 20-bit security code and 4-bit verification code. You will get the checking result after clicking the ‘query” icon.
3. Checking results:

A. The security code entered proves the product is authentic.
The product you purchased is an authentic product from Guangzhou FiiO Electronics  Technology Co., Ltd. Thanks for your support!
B. The security code entered proves the product is not authentic.
The product you purchased is not an authentic product from Guangzhou FiiO Electronics Technology Co., Ltd.

Warranty Terms and Conditions

maintenance
Accessories except the headphone units
(subject to the official list)| Accessories| N/A
Package materials (fragile parts like the packing box)| N/A
Notes:
The above guarantees start from the issue date of the invoice/receipt.
These warranty terms are for reference only. For specific details, please refer to the warrnty terms of our local sales agents.

FiiO reserves the final interpretation and amendment for the above warranty terms and conditions.
The warranty is null and void under the following circumstances.
–Defects or damage caused by improper operations such as vibrating, bumping, falling to the ground, buckling, tearing, excessive pulling.
–Defects or damage caused by disassembly of the product by user or unauthorized repair personnel.
–Defects or damage for being put in humid environments, high-intensity magnetic fields or soaked into water.
–Defects or damage caused by natural disasters.
–Unable to provide valid proofs of purchase.

Note: Man-made damage is determined by the judge of FiiO’s maintenance personnel.

Procedures of Getting After-Sales Service

• Please contact the local dealer first once you find problems with the device. If they refuse to give related after-sales services, please give feedback to FiiO Support by sending an email to [email protected]. We would handle it properly to ensure customers’ satisfaction.

• For repair service, you are supposed to send the defective product to FiiO with freight paid. After it has been repaired, we will send the product back to you with freight paid by FiiO.
  Ot is highly suggested to buy from local authorized sales agents to get better, faster before- and after-sales service.

• Please do not maintain or dismantle the product on your own and please keep it away from water

• For abnormal working issues or any further questions, please visit our official website ->Support to get related information or send an email to [email protected] for consultation.

Note: Due to continuousimprovement, every specification and design is subject tochange atany time without further notice.

Contact Information for After-Sales Service

E-mail: [email protected]
Web: https://www.fiio.com
Facebook: https://www.facebook.com/FIIOAUDIO
Hereby, Guangzhou FiiO Electronics Technology Co., Ltd. declares that this device is in compliance with Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at: www.fiio.com/doc

WEEE Directive & Product Disposal

At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.

Internal/Supplied Batteries

This symbol on the battery indicates that the battery is to be collected separately.
This battery is designed for separate collection at an appropriate collection point.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>