FiiO SP3 BT High Fidelity Active Desktop Speakers User Guide
- June 1, 2024
- Fiio
Table of Contents
- List of Items Included
- Ports Labeled and Function Explained
- Placement of the Speaker
- Placement of desktop speakers
- Adjustment of Sound
- Sound Radiation Space
- Connection Guidance
- Installation of the Rubber Base
- Notes and Precautions
- Specifications
- Authenticity Checking
- Warranty Terms and Conditions
- Procedures of Getting After-Sales Service
- WEEE Directive & Product Disposal
- FCC NOTICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FiiO SP3 BT High Fidelity Active Desktop Speakers
List of Items Included
(please check if the following items are included)
- Primary speaker *l
- Secondary speaker *l
- Power adapter *l
- AC power cable *l
- RCA to 3.5mm cable *l
- Primary and secondary speakers connecting cable *l
- Rubber base *2 pairs (O O and 7 °)
- User manual *l
Ports Labeled and Function Explained
-
Tweeter
-
Woofer
-
RGB ambient light
-
Removable rubber base
-
Volume knob
-
Bass knob
-
Input selection button
-
RGB effect selection button
-
L/R channel switch
-
Power button
-
DC power input
-
Primary speaker output
-
RCA input
-
AUX input
-
Secondary speaker input
-
Coaxial input
-
Optical input
-
USB input
-
Bluetooth antenna
Note: Pictures are for reference only. The actual product may vary.
L/R channel switch:
Through the channel switch, the primary speaker can be placed on either the
left or right side of the desk for convenient operation. The channel switch is
set to Ras default, and the primary speaker should be placed on the right
side. If the primary speaker is placed on the left side, please toggle the
channel switch to L.
Bluetooth connection:
Bluetooth input is as default when turning on the speakers for the first time.
The RGB light flashing alternately in red and blue means the speakers are in
the pairing state. Search “FIIO SP3 BT” on the device and connect them. After
a successful connection, the RGB light will display the color according to the
current Bluetooth codec.
Clear pairing: When the Bluetooth is connected, long press the Input selection
button to disconnect the Bluetooth and reenter the pairing state. The RGB
light will flash alternately in red and blue.
Placement of the Speaker
Placement of desktop speakers
When using the SP3 BT with a computer on a desktop, it is suggested to place
the primary and secondary speakers respectively on each side of the computer
monitor. Their back should be kept more than 20cm ( 8 inches) away from the
wall, and the side more than 40cm ( 16 inches). The distance between the Land
R speakers should be kept at 80cm~ 150cm ( 32~60 inches).
Based on personal listening preference, the distance between the two speakers
should be adjusted according to the distance between the listener and the
desktop/speaker. The fa rt her the listener from the desktop/speaker, the fa
rt her the distance between the two speakers, forming an equilateral triangle
between the two speakers and the listener. The vertical distance between the
listener and the speaker is generally between 50~ 100cm (20~40 inches). The
listener should stay at the center of the two speakers as much as possible,
and adjust the distance and placing angle of the two speakers to acquire a
satisfactory stereo listening experience, reproducing the soundstage and
creating a better sense of atmosphere.
Adjustment of Sound
The best sound performance can be gained by placing and adjusting the speakers
correctly.
Placement (as shown in Figure 1): Land R speakers face the listener and
form an equilateral triangle with the listener.
Placement (as shown in Figure 2): When the speakers are used for near-
field listening, they should install a base with an elevation angle to revise
the sound image positioning.
Sound Radiation Space
The space where the speakers are placed is called the sound radiation space.
When the sound radiation is limited by the wall, the sound pressure level will
increase. Each wall around the speaker will contribute to an increase in the
sound pressure level.
Ideally, freely placed speakers should have a flat frequency response curve.
Placing it close to the wall will boost the bass- close to one wall, the bass
will increase by 6dB; close to the included angle of two walls (or the
included angle between the wall and the desk), the bass will increase by 12dB;
close to the included angle between two walls and the floor (or the desk,
ceiling), the bass will increase by 18dB.
Cautions: The bass boost effect is set to the maximum by default. It can
be adjusted according to different usage scenarios and desktop placement
properly. If the speakers are placed against the wall or in a relatively small
room, it is suggested to decrease the bass appropriately. But if they are
placed in a large room or far away from the wall, the bass can be set to the
maximum.
Note: Pictures are for reference only. The actual product may vary.
Connection Guidance
-
How to connect the primary and secondary speakers?
Connect the “Out to Left” port to the “In from Right” port through the connecting cable. Please ensure the”~” marker of the cable plug faces upwards for proper insertion and ensure the connection is in place. -
Connection of different inputs
Switch the speaker to the corresponding input through the “Input selection switch”. Here are instructions for connection. -
RCA and AUX inputs: Use the RCA to 3.5mm audio cable included in the accessory, inserting the RCA plugs into the speaker corresponding to red and white ports, and the 3.5mm plug at the other end of the cable into the appropriate port of the audio device. Or insert the 3.5mm plug into the speaker, and the RCA plugs into the appropriate output of the preamp corresponding to red and white ports.
-
Coaxial, USB and Optical inputs: Connect to digital preamplifiers (the connecting cable is not included).
-
Bluetooth input: Follow the Bluetooth connection instructions to connect to devices that support Bluetooth transmission.
-
How to connect the SP3 BT to a power supply?
Connect the AC power cable to a power adapter, the cable plug to the “DC IN” port on the primary speaker, and insert the power plug into a corresponding socket.
Note: Pictures are for reference only. The actual product may vary.
Installation of the Rubber Base
The SP3 BT includes two rubber bases with different angles (0° and 7°). The 0°
base was pre-installed at the factory.
Steps for installing/replacing the base: Align and install the raised part on
the bottom of the speaker to the slot of the rubber base. Check if they are
stable as a whole to ensure the installation is completed.
Note: Pictures are for reference only. The actual product may vary.
Notes and Precautions
- To avoid excessively high volume causing damage to the hearing, please ensure the volume is at a low level before playing music, and adjust it to a proper level after playing.
- If the speaker is silent during playback, please check whether the RGB light is on to tell whether the power supply is normal. At the same time, check the connection of the cable, and whether the color of the RGB light corresponds to the input source.
- Please do not disassemble the speakers on your own. The maintenance and adjustment must be completed by personnel with professional maintenance qualifications.
- Please do not place the speakers near water or in a humid environment. Please do not place objects filled with liquids, such as vases, on or near the speakers.
- Please make sure the air flow behind the speaker is smooth, and do not obstruct it around the speaker.
Specifications
Speaker model: SP3 BT
Configuration: 3.5-inch carbon fiber woofer, 1-inch silk dome tweeter
Frequency range: 65Hz-20kHz (+2dB)
Audio input: RCA/AUX/OPT/COAX/BT/USB
Bluetooth codec support: LDAC/a ptX Ad a ptive/a ptX HD/a ptX/a ptX LL/
AAC/SBC
Amplifier distortion output power limit: Bass 230W, Treble 210W
Bass adjustment: -8dB~0dB
Authenticity Checking
- Scratch off the coating on the product package to get a 20-bit security code.
- Go to FIIO’s official website at www.fiio.com. Click the ‘Check Authenticity’ icon in the upper-right corner, and then enter the 20-bit security code and 4-bit verification code. You will get the checking result after clicking the ‘query’ icon.
- Checking results:
A. The security code entered proves the product is authentic.
The product you purchased is an authentic product from Guangzhou FIIO Electronics Technology Co., Ltd. Thanks for your support!
B. The security code entered proves the product is not authentic.
The product you purchased is not an authentic product from Guangzhou FIIO Electronics Technology Co., Ltd.
Warranty Terms and Conditions
Product types | Term of service |
---|---|
Main body | One month of guarantee for replacement; one year of free |
maintenance
Accessories except for the main body (subject to the official list)|
Accessories| N/A
Package materials (fragile parts like the packing box)| N/A
Notes : The above guarantees start from the issue date of the
invoice/receipt. These warranty terms are for reference only. For specific
details, please refer to the warranty terms of our local sales agents.
FIIO reserves the final interpretation and amendment for the above warranty
terms and conditions.
The warranty is null and void under the following circumstances.
- Defects or damage caused by improper operations such as vibrating, bumping, falling to the ground, buckling, tearing, excessive pulling.
- Defects or damage caused by disassembly of the product by the user or unauthorized repair personnel.
- Defects or damage from being put in humid environments, places of high-intensity magnetic fields or soaked into water.
- Defects or damage caused by natural disasters.
- Unable to provide valid proof of purchase.
Note: Man-made damage should be determined by FIIO’s maintenance personnel.
Procedures of Getting After-Sales Service
- Please contact the local dealer first once you find problems with the device. If they refuse to give related after-sales service, please give feedback to FIIO Support by sending an email to support@fiio.com. We would handle it properly to ensure customers’ satisfaction.
- For repair service, you are supposed to send the defective product to FIIO with freight paid. After it has been repaired, we will send the product back to you with freight paid by FIIO.
- It is highly suggested to buy the product from the local authorized sales agents so as to get better, faster before- and after-sales service.
- Please do not maintain or dismantle the product on your own and keep it away from water.
- For abnormal working issues or any further questions, please visit our official website> Support to get related information or send an email to support@fiio.com for consultation.
Note: Due to continuous improvement, every specification and design is subject to change at any time without further notice.
Contact Information for After-Sales Service
E-mail: support@fiio.com
Web: https://www.fiio.com
Facebook: https://www.facebook.com/FiiOAUDIO &
facebook.com/fiiosupport
Scan the QR Codes Below for More Details
The SP3 BT supports the FIIO Control app. Scan the QR code to download it.
Hereby, Guangzhou FIIO Electronics Technology Co., Ltd declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.fiio.com/doc
Function | Frequency | Maximum output power |
---|---|---|
Bluetooth | 2402-2480M | Hz 5.45dBm |
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be handed as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International Ltd., registered in the United States and other countries.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>