SABBAT Q12 Open Wearable Stereo Earbuds User Manual

SABBAT Q12 Open Wearable Stereo Earbuds

Product Usage Instructions

• Connect the provided charging cable to the device.
• Plug the other end of the cable into a power source.
• The LED indicator will turn red while charging and green when fully charged.
• Turn on the device by pressing and holding the power button.
• Enable Bluetooth on your device and search for available devices.
• Select “Open Wearable Stereo” from the list of available devices to pair.
• Once paired, play music on your connected device.
• Adjust the volume using the buttons on the device.
• To skip tracks, press the forward or backward buttons.

More compatible

• Compatible with Apple IOS and
• Android smartphones

Rich functions, one-button control

• Short press Play/ Pause /Answer / Hang up
• Long press 3 seconds | In the boot state: Wake up Siri In the off state: Power on
• Long press 5 seconds Power off
• Double click: Previous song Three click: Volume-
• Four click: Switch music and game mode
• Five click: Switch between Chinese and English beeps
• Double click: Next song Three click: Volume+

Easy pairing connection

1. The earbuds are taken out of the package and placed in the charging case. Theearbuds are charging when the white light is on.
2. Remove both earbuds from the charging case,the earbuds will be in pairing mode. One of earbuds will flash white lights, while the other earbud stop to flash lights, that means the earbuds are paired successfully.
3. Open the phone Bluetooth Search Bluetooth name: Sabbat Q12 Click Connect
4. After the earbuds are used, put it directly into the charging case and the earbuds turn off.
5. Use the earbuds again, take out both earbuds, both earbuds are auto pair and connect the phone Bluetooth.

If the left and right earbuds do not connect within 1 minute, the earbuds will enter standby mode, if necessary please turn off the earbuds and follow the above steps to connect.

Single-use

• A. Remove one of the earbuds (any earbuds) from the charging case, it will automatically power on and reconnect the Bluetooth device independently.
• B. When using both earbuds, put one of earbuds back into the charging case, and the other earbud will still work and remain connected

Charging schematic

Earbuds

• When charging: the green light of the charging case is on, and the white light of the earbuds is on
• Fully Charged: the green light of the charging case is off, and the white light of the earbuds is off
• Charging time: About 1 Hour

Charging case

• When charging: a red light flashes
• Full charged: red light is on
• Charging time: about 1 hour
• When charging the product charging case, please use our standard charging cable, 5V/ 1A charger. Special Note: Do not use more than 5V/ 1A fast charge charger, so as notto damage the charging case!

Wear schematic

Product schematic diagram

Packing List

• Bluetooth earbuds(left and right)
• Charging case
• Type-C charging cable
• User manual
• Beautiful packaging

Product specifications

• Product Name: Open Wearable Stereo
• Bluetooth connection name: Sabbat Q12
• Power Input: DC 5V
• Charging interface: TYPE-C
• Earbuds battery capacity: 3.7V/45mAh
• Charging case battery capacity: 3.7V/300mAh
• Call/play time: about 6 hours
• Charging time: about 60 minutes
• Support agreement: HSP/HFP/A2DP/AVRCP
• Sensitivity: 105 ÷ 3dB@1kHz,1mw
• Frequency response range: 20-20000Hz
• Impedance: 22Ω ÷ 15%
• Audio decoding: aac/sbc

FAQ

• The phone can not search the Bluetooth earbud device
  • Cancel all Bluetooth connections in your mobile phone. and then re-open and search the Bluetooth.
• The earbuds have problems with interrupting or disconnection during calls or music time
  • Bluetooth earbuds power shortage.
  • The distance between cell phone and Bluetooth earbuds more than 10 meters.
  • There is a large area of signal blocking objects between the phone and the Bluetooth earbuds, for example, the wall.
  • Aleft and right ear pairing is not synchronized, it is recommended to restart the earbuds and repair.
• Bluetooth earbuds’ s sound quality is not ideal?
  • The new earbuds need to be used for a longer time, it is recommended to play the music for some time to age the earbuds, after that, the sound quality will be improved a lot.

Restore to factory settings/Reset

1. Disconnect and unpair the Bluetooth earbuds from the mobile devices.
2. Press both earbuds for 6 seconds to turn off, and ensure that both earbuds are turned off.
3. Press the both earbuds at the same time for about 20 seconds.
4. Put both earbuds into the charging case, wait for the white light to turn on for 2 seconds, and take them out. Pairing successfully, when one of earbuds flashes white light and the other earbud does not light up.
5. After successfully pairing, reconnect to the mobile devices.

Product quality warranty card

Warranty Instructions

Thank you for purchasing the Sabbat products, to protect your legal rights, please read the following items
This card is a product warranty certificate. Please provide this card together with the product to our company for any after-sales repair.
This warranty card is only valid for product use within the scope of the following.

1. Through the legitimate and formal channels to obtain the company’s products;
2. Non-human damaged product,including but are not limited to unauthorized removal Unloading, improper use, natural disasters and so on.
3. Does not exceed the product warranty period;

Cautions include but are not limited to the above. The company reserves the final explanation.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>