Sabbat E12 Manual
- June 16, 2024
- Sabbat
Table of Contents
E12 true wireless bluetooth headset
Instructions
Bluetooth pairing
|
- Take the left and right ears out of the charging compartment, the red light of the headset flashes twice and the red light is off, and the ears are paired successfully.
- When one ear flashes red and blue lights, turn on the Bluetooth of the phone, search for the Bluetooth name “Sabbat E12”, and click After about 2 seconds, one of the earphones (auxiliary ears) is required to be paired with the mobile phone. Click “Pair” to complete both ears. Into a pair.
- Single ear use (left ear): any earphone can be connected to the mobile phone separately from the charging compartment. Binaural messenger After use, put any earphone back into the charging compartment, and the other earphone will automatically connect back to the Bluetooth of the mobile phone after about 5 seconds.
- After using monaural mode, if you want to switch to binaural mode. Put the left and right earphones in the charging compartment, Take out the earphones. Open the bluetooth of the mobile phone and click on the configured “Sabbat E12” device name to enter Into binaural mode.
- If the left and right ears cannot be put into binaural mode according to “Method 4”. After resetting first, set the left and right earphones
Put it in the charging compartment and take out the earphones, both earphones will flash. Please wait until only the left side is left
The headset flickers, search for the device name “Sabbat E12” after turning on the Bluetooth of the mobile phone, and then click on the device, that is It is a binaural mode.
Note: The Bluetooth name of the right ear paired separately is “Sabbat E12-R”
Reset method
|
- Delete all SABBAT on the phone
- Take out the charging compartment with both ears, press and hold the buttons on both earphones, the earphones will flash red light twice, which means off Press the button again, the display light will show red light→blue light→purple light→purple light, move upward As about 20 seconds, put the earphones back into the charging compartment after completion, and after confirming that the red light is constantly on, take both ears, You can pair (if there are two SABBAT links on the Bluetooth of the mobile phone, please reset the Bluetooth of the mobile phone).
Newly opened).
Instructions
|
- Switch on and off: Long press the left/right ear for 4 seconds
- Adjust the volume level: tap the left ear 3 times (down)/right ear 3 times (up)
- Switch tracks: Tap the left ear 2 times (top)/right ear 2 times (bottom track)
- Play/pause, answer/hang-up: tap the left/right ear once
- Voice assistant, refused to answer the call: long-press the left/right ear for 2 seconds
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>