Sabbat E12 Ultra User Manual
- June 8, 2024
- Sabbat
Table of Contents
E12 Ultra True Wireless Bluetooth Headset
Instructions
Bluetooth pairing
- Take the left and right ears out of the charging compartment, and the headset will enter the pairing mode. The red and white lights of the host flash alternately, and the one of the earphones stops flashing, the pairing is successful.
- Turn on the bluetooth of the mobile phone, search for the Bluetooth name “Sabbat E12 Ultra”, click connect, after about 2 seconds one of the earphones (auxiliary ears) needs to be paired with the mobile phone, click pairing, and both ears will complete the pairing.
- Single ear use: any earphone can be connected to the mobile phone separately from the charging compartment. Under binaural use, Put any earphone back into the charging compartment, and the other earphone will automatically connect back to the Bluetooth of the mobile phone after about 5 seconds.
Reset method
- Put the two earphones in the charging compartment and the red light will turn on at the same time. And delete all ULTRA in the Bluetooth of the mobile phone Except, turn off the bluetooth of the mobile phone
- Press the buttons on both sides of the earphones at the same time, after the red and white lights flash, take out the earphones on both sides
- After removing, the red and white lights of the bilateral earphones will flash for 5 seconds, wait until the left side flashes red and white lights, then restart Connect
Instructions
- Switch on and off: long press the left/right ear for 3 seconds
- Adjust the volume: tap the left/right ear 3 times
- Switch tracks: tap the left/right ear twice
- Play/pause, answer/hang up: tap the left/right ear once
- Voice assistant, refused to answer the call: long press the left/right ear for 2 seconds
Sabbat E12 Ultra User Manual – Download [optimized]
Sabbat E12 Ultra User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>