Sabbat Vooplay Wireless Bluetooth Music Headphone Instructions

Sabbat Vooplay Wireless Bluetooth Music Headphone

INTRODUCTION

• Lynn
• Glacier
• Cereal
• Shadow
• Moss
• Reef

Bluetooth 5.0More compatible

• Compatible with Apple 10S and Android smartphones

Wear schematic

Easy pairing connection

Step1: Left/Right earbud pairing

• For the first time using, place the left and right earbuds back in the charging box, the earbuds will be in charging status with red lights.
• Remove both earbuds from the charging box, the earbuds Will be in pairing mode main earbud will flash Red and White lights alternately, while the other earbud stop to flashlights, that means the earbuds are paired successfully

Step2: Earbuds connect wit Bluetooth device

• Switch on Bluetooth on your device, search and connect SABBAT VOOPLAY select the pair button to complete the process.
• Support main and auxiliary switch, any earphone can be used as the host when it is turned on first.

Single-use

• Remove one of the earbuds( any earbud) from the charging box. it will automatically power on and reconnect to your phone Bluetooth independently
• When you are using both earbuds together place the left or right earbud back into the charging box to use the earbud alone the earbud you placed back into the charging box was the previous main earbud, the unit that is still in use will automatically be assigned as the main unit. This process should take about 5 seconds

The earbuds will power off automatically after placing them back into the charging box. To use the earbuds again simply take the earbuds out of the charging box and they will reconnect to the last Bluetooth device automatically If the last device does not open the Bluetooth button, the main earbud will flash red and white light alternately after5 seconds. please search and connects about E 12 Uiltra’on theother Bluetooth device.

Rich functions, one-button control

• R L short press Power on/Play/Pause
• Answer/Hang-up
• R L Long press 2 Wake up Siri/Reject call seconds
• The above functions can be operated in any side earbud when paired with Bluetooth.
• R L Long press together for4 seconds
• Power OFF
• Double click: next song
• Three clicks: volume +
• Double click : previous song
• Three clicks: volume

Charging schematic

Up to

• Call/Play: about
• Standby: about 150 hours
• 4 times: Mobile charging

Charging box

• Charging status: the White light flashed full
• power: Four white lights are on Charging time: about I hour

Headset

• Charging status: long red light
• Full power: the red light goes out
• Charging time: about 1 hour

Note: Please use our standard charging cable with your 5V1Acharger to change our product’s charging box
Special Note: Do not use a fast charger that output a current higher than 5V1A. or it may damage the charging box

Product schematic diagram

Packing list

• Bluetooth headset Type-C charging cable (left and right)
• Headset power box Beautiful packaging
• User’s Guide

Product specifications

• Product name: (Sabbat) SABBAT Bluetooth Wireless Earbuds
• Bluetooth Name: SABBATVOOPLAAY
• Bluetooth Version: Bluetooth V5.0
• Bluetooth agreement A2DP/AVRCP/HFP/HSP
• Audio decoding: Qualcomm aptx/aac/sbc
• Transmission distance: 10m
• Play time: 6’H(earbuds) +24″H( charging box )
• Charging time About 1 H (earbuds/charging box)
• Charge Port: Type-C
• Battery capacity: 3.7V/50mAh ( earbuds)
• Battery capacity: 3.7V/390 mAh(charging box)
• Frequency range: 20Hz-20000Hz
• Sensitivity: 101+3db@1K,1mw
• Impedance: 320

FAQ

The phone can not search the Bluetooth headset device

• Cancel all Bluetooth connections in your mobile phone, and then re-open and search the Bluetooth.
• The headset has the problem of interrupting or disconnection during the calls or the music time Bluetooth headset power shortage.
• The distance between a cell phone and a Bluetooth headset is more than 10 meters.
• There is a large area of signal-blocking objects between the phone and the Bluetooth headset, for example, the wall.
• left and right car pairing is not synchronized, it is recommended to restart the earbuds and repair them.

The Bluetooth headset’s s sound quality is not ideal?

• The new headset needs to be used for a longer time, it is recommended to play the music for some time to age the headset, after that, the sound quality will be improved a lot.

Restore to factory settings:

1. Place both earbuds in the charging box and maintain the charging state
2. Press and hold both earbuds for 6-8 seconds then release the button after the red light flashes four times
3. Take out both earbuds, the white light flashes and wait for automatically pair.
4. When pairing is successful, only one unit blinks alternately and White, this means the factory settings are restored successfully

Note: It is not recommended to restore the factory settings when the earphone is fully charaed.

Product quality warranty card

Warranty instructions

Thank you for purchasing the Sabbat product, to protect your legal rights, please read the following items:
This card is a product warranty certificate. Please provide this card together with the product to our company for any after-sales repair,

This warranty card is only valid for product use within the scope of the following

1. Through the legitimate and formal channels to obtain the company’s products;
2. Non-human damaged products, including but not limited to unauthorized removal Unloading, improper use, natural disasters, and so on.
3. Does not exceed the product warranty period;

Cautions: include but are not limited to the above. The company reserves the final explanation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B] digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices)

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>