Sabbat M100 JETPODS Wireless Headphones User Guide
- June 10, 2024
- Sabbat
Table of Contents
Sabbat M100 JETPODS Wireless Headphones
Sabbat Jetpods
Bluetooth 5.2 more Compatible
Compatible with Apple IOS and Andriod Smartphones
Various instructions Just one touch, easy to get
- Double clicks any earbuds: Pause/ Play /Answer/ Hang up
- Three chcks left earbud: Previous song
- Three clicks nght earbud: Next song
- Four chcks any earbuds: Gam,ng mode
- Five clicks any earbuds: Switching between Chinese and English
- Long press earbuds for 2 seconds at the same time: Power on
- Long press any earbuds 3 seconds: Wake up sirl
Hall switch Open the case to connect
- When charging case is opened, the earbud is turned on
- When charging case ,s closed, the earbud ,s turned off
Charging case button function:
- Short press button to check the current battery, LEO light ,son for 3 seconds
- Long press button 2.5 seconds to creator Bluetooth pairing information (When entering paring mode)
Easy pairing connection
- Take out earbuds and charging case From packaging, open the charging / ·- case, earbuds and the charging case are activated, and the indicator light of the charging case is always on. –
- Turn on the bluetooth device, search for the bluetooth name: “Sabbat Jetpods” click to connect
- After the earbud is used, put 1t into the charging case directly, while charging case 1s closed, the earbud is turned off automatically.
- To use the earbud again, open L11e charging case. L11e earbud can automatically connect to the Bluetooth device
Single earbud use
- Take out one of the earbuds(any earbuds) from the charging case, il will connect to the Bluelooth device independently.
- When using paired dual earbuds. put any earbud back 1nlo the charging case and close, and the other earbud works normally and 1s cont1nuously connected.
Charging schematic
Single use time is 4+ hours
It can be used with charging case for up to 20+ hours
Charging case LED indicator light
Creen light: more than 70% power
Orange light: 20% to 70% power
Red light: below 20% power
Wear schematic
Product schematic
Packing list
- Earbuds(Left and right)
- Type-C cable
- Beautiful packaging
- Charging case
- User’s Guide
Product specifications
Product name| Sabbat wireless earbuds| Bluetooth connection
name| Sabbat Jetpods
---|---|---|---
Bluetooth Version| 5.2| Power i nput| DCSV
Charging Interface| Type-C| battery capacity|
~.711/~SmAh(Earbuds)
battery capacity| 3.7V/400mAh(Charging case)| Call/Playtime|
About 4+Hours
Charging time| About 60 minutes| Support agreement|
HSP/HFP/A2DP/AVRCP
Sensitivity| 101 ± 3db@1k,1mw| Frequency response| Range
20-20000Hz| Independence| 1sn| ****
Product quality warranty card
| Customer name | Contact number | |
|---|---|---|
| Contact address | Product model |
Warranty Instructions
Thank you for purchasing the Sabbat product, to protect your legal rights
,please read the following items.
This card Is a product warranty cert1f1cate.Please provide this card together
with the product 10 our company tor any after- sales repair.
This warranty card Is only valid for product use within t11e scope of the
following
(1)Througl1 the teg111mate and formal channels to Obtain company’s
products.
(2)Non-human damaged product including but arenol limited unauthorized
removal unloading, improper use. Natural disasters and so on.
(3) Does not exceed the product warranty period’ Cautions include but
are not lim11ed to the above “The company reserves the final explanation
FCC Caution
This device complies with part 15 of the FCC Rules . Operation is subject to the following two condition : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes modification not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to per 15 of the FCC Rules . These limits are designed to provide equipment generates uses and can radiate radio frequency energy and , if not installed any particular installation . if this equipment does cause harmful interference to radio or television reception , which can be determined by running the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measure.
- Reorient o r redocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV Technician for help.
RF warning for portable devices:
the device has been valuated meet general ! RF Exposure requirement.
The device can be used in portable exposure condition with out restriction.
FAQ
The phone or Bluetooth device can not search the earbuds****
Cancel all Bluetooth connection in your phone or Bluetooth device, and then re-open and search for the Bluetooth
The earbud has interrupt or disconnection during the call or the music time****
(1)Earbuds power shortage.
(2)The distance between phone(or Bluetooth device) and earbuds more than
10 meters
(3)There is a large area of signal blocking objects between phone( or
Bluetooth device) and the earbuds, for example, the Wall.
(4)Left and right earbud pairing is not synchronized, it is recommended
to re- pair and connect the left and right earbuds after turn off.
Earbuds sound quality is not ideal?****
New earbuds need to listen more longer, it is recommended to continue playing music for some time. The sound quality will be improved a lot.