OSCAL PAD80 WiFi Tablet User Guide

 OSCAL PAD80 WiFi Tablet

Product Information

Specifications:

• Model: 0OMZUIF#SBWF
• Dimensions: 26$, 4535 (6%&
• Features: Speaker, Volume+/-, Power, Front Camera, Screen, TF Card Slot, Charger-Type-C, Headphone Jack, Camera Flashlight, Microphone
• SAR: 2.0W/kg

Product Usage Instructions

How to Boot:
Press the power button for 3-5 seconds to boot up the device with the non- removable battery.

Language Switching Settings:
To switch languages:

1. Go to Main menu – Settings – System Setting – Language and Input Method.
2. Select Language and Input Method – Language – Language Adding.
3. Select the language needed and the system will automatically switch to the selected language interface.
4. Drag the language icon to set it as the primary language.

Safety Precautions:

• Avoid placing the device near medical implants or heat sources.
• Disconnect the charger after charging and avoid exposure to high temperatures.
• Do not attempt to replace the non-removable battery yourself.
• Use only approved chargers and batteries to prevent hazards.
• Avoid damaging the battery by dropping or puncturing it.

Maintenance:
To maintain the device:

• Follow the manual instructions for disassembly and maintenance.
• Avoid rough handling to prevent damage to the internal components.

Frequently Asked Questions

Q: What is the SAR value of the product?
A: The SAR value of this product is 2.0W/kg, in compliance with national standards.

Q: Can I replace the battery myself?
A: If the device has a non-removable battery, it is advised not to replace it yourself to avoid damage to the battery or device.

Q: How do I switch languages on the device?
A: Navigate to Main menu – Settings – System Setting – Language and Input Method to switch languages on the device.

OVERVIEW

 How to insert the card

• Press the card pin into the side hole and then the card tray pops up and pulls out it.
• Take out the card slot and place the TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
• With the pad facing up, insert the cardholder into the pad in the direction of the arrow.

 How to boot

Non-removable battery Press the power button for 3-5 seconds to boot

Language switching settings

•  Main menu–settings-system setting-language and input method
• Language and input method language adding
• Select the language you need, the system will automatically jump back to the language interface.
• Select the icon after the language bar and drag it to the first one.

 SAR

• The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg.
• In line with the requirements of the national standard GB 21288-2007.

 Safety

To ensure safely using the product, you must strictly abide by the following rules.

• The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together to high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
• If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
• Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery, insert other objects, or immerse in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
• Hereby, Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment type complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://oscal.hk/declaration-of-conformity

Use carefully with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.

• Restrictions in the 5 GHz band:
  According to Article 10(10) of Directive 2014/53/EU, the Packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (E), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (5K), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (L). The WLAN function for this device is restricted to indoor use only when operating in the 5180 to 5240 MHz frequency range.

• Declaration:
  Our equipment which supports 5G Wi-Fi all meet the above EU Standards. Otherwise, they do not meet the above standards. The object of the declaration described above conforms with the essential requirements of the relevant Union harmonization legislation: Radio Equipment Directive RED (2014/53/EU).

Maintenance

• Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
• Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened With water or mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
•  If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

SPECIFICATIONS

Function

| ****

Operation Frequency

| Max RF

outputpower:

---|---|---
BT(BR+EDR)| 2402MHz–2480MHz| <10dBm
BLE| 2402MHz–2480MHz| <10dBm

WIFI 802.11b/g/ n(HT20,HT40)

| 802.11b/g/n(20MHz):

2412~2472MHz;

802.11n(40MHz):2422~2462MHz

| ****

<20dBm

Wi-Fi 5.2G(802.11a/n20/n40/ac20/ac40/ac80)

| 802.11a/ n20/ac20:5180MHz~5240MHz 802.11 n40/ac40:5190MHz~5230MHz

802.11ac80:5210MHz

| ****

<20dBm

Wi-Fi 5.8G(802.11a/n20/n40/ac20/ac40/ac80)

| 802.11a/ n20/ac20:5745MHz~5825MHz 802.11 n40/ac40:5755MHz~5795MHz

802.11ac80:5775MHz

| ****

<13.98dBm

FM| Rx(Downlink): 87.5MHz~108MHz| —
GPS| Rx(Downlink): 1.57542GHz| —

Warning

1. Use carefully with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3. The product shall only be connected to a USB interface of version USB2.0.
4. The adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature:-10~40ºC.
6. The plug is considered as a disconnect device of the adapter.
7. SAR: The device complies with RF specifications when the device is used at 0.5cm from your body (SAR limit 2.0 W/Kg). The device complies with the requirements.

Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

FCC Caution$

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Tablet PC (FCC ID: 2A7DX-PAD80WIFI) has been tested against this SAR limit. SAR information on this can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device’s FCC ID number for the search. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are esigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following easures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2A7DX-PAD80WIFI

Shenzhen DOKE Electronic Co.,Ltd Address: 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China.

www.oscal.hk

References

• Page Not Found | OSCAL
• Page Not Found | OSCAL
• Page Not Found | OSCAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>