ElePods X ANC TWS Bluetooth Earphones User Manual

June 8, 2024
Elephone

User Manual

FIG 1 ElePods X ANC TWS Bluetooth Earphones Image

ElePods X ANC TWS Bluetooth Earphones

Change Earplugs

To remove tip, pull firmly.
To attach tip, push until it clicks

FIG 2 Change Earplugs

Choose the most comfortable fit your ears.

Charge

  • Elepods X earphone charge in the case.
  • Charging case needs to be charged with Type-C charging cable.
  • Please use USB AC power adapter, which can provide 5V, 500mA or higher output current.
  • The charging state will be indicated on the screen of the charging box.

Charging time
About 1.5 hours (Earphone)
About 1.5 hours (Charging box)

FIG 3 Charge

Charging indicator

  • Charging case only: Red
  • Left earbud charging only: Green
  • Right earbud charging only: Blue
  • Charge left and right earbuds only: Cyan
  • Charging case + left and right earbuds charging: White
  • Charging case + left earbud charging: Yellow
  • Charging case + right earbud charging: Magenta

Note: If the earbuds is not charged, please clean the spring pin of charging case and charging copper pole of earbuds with cleaning cotton.

Specification

Power Supply:

  • DC 3.7V, built-in rechargeable lithium batteries.
  • DC 5V, charging with USB.
  • Operating temperature: 0°C to 40°C

Use time

  • 16.5-7 hours of continuous working time (active noise cancellation mode; playing music at moderate volume);
  • The charging box is equipped with 600mAh battery, which can support 3.0 times of earphone charging and provide an additional 20 hours of endurance                                      Note: depending on the CODEC and usage, the usage time may be reduced.

Weight: About 5.1g x 2 (Earphone) About 42.5g (Charging box)

Communication specification

  • Bluetooth 5.0
  • Power Class 1
  • Maximum communication range 20m
  • Frequency band 2.4GHz (2.400ghz-2.4835ghz)
  • Transmit power <20dbm
  • Compatible with Bluetooth protocol A2DP / AVRCP / HFP / HSP
  • Support CODEC SBC / AAC
  • Transmission range (A2DP) 20Hz-20KHz (sampling rate 44.1 KHz)

Items in package

  • Bluetooth ANC stereo earphone * 1
  • Charging box *1
  • USB type-C cable + 1
  • Comfortable earplugs S 2, M + 2, L 2
  • User manual * 1

About Active Noise Cancellation

  • The Active Noise Cancellation module senses the external environment noise through the built-in microphone, and produces a sound with the same intensity but opposite direction to offset the environment noise.
  • The noise reduction effect may not be obvious in very quiet environment, or some noise may be heard.
  • The noise reduction function is mainly used for the noise in the low frequency band. Although the noise is reduced, it will not be completely eliminated.
  • Depending on the way you wear the earphone, the noise reduction effect may be different or a tone may sound. If this happens, please remove the earphone and put it on again.
  • Do not cover the microphone with hands or other objects, which may affect the normal operation of noise reduction function or ambient sound mode

Compatible with iOS and Windows

Tum on Bluetooth

Turn on Bluetooth in the settings interface

Open Elepods X box

Open box, the earbuds enter pairing mode.

If the Red LED flash slowly when open the box, the power is enough. If the Red LED flash fast when open the box, the power is low, please charge the box in time.

FIG 5 Open Elepods X box

Elepods X indicator

  • Power on: Green light flashes 3 times
  • Unconnected: Green light flashing slowly
  • Connected: Green light off
  • Low power: Green light on 3s then off 3s, repeat in turn

Connect to Elepods X

a: Find Elepods X in Bluetooth
b: Click Elepods X to connect

FIG 6 Connect to Elepods X

Note: If the Earphone have been connected with a phone and the Bluetooth is on, open the cover of the charging box and the earphone will connect the phone automatically.

Enjoy your music

a: Take out your earphone from charging box
b: Put on your earphone properly

FIG 7 Enjoy your music

“The earphone will turns off after 3 minutes when the headset is outside the charging box and It’s not connected with any handset.

FIG 8 Enjoy your music

Active Noise Cancellation Control

FIG 9 Active Noise Cancellation Control

Note:

When walking, driving or cycling, please do not use ANC earbuds, otherwise it may cause traffic accidents. If you have to use it, please select the ambient sound mode. Do not use in dangerous places unless you can hear the voices around you.

Read More About This Manual & Download PDF:

ElePods X ANC TWS Bluetooth Earphones User Manual – Optimized PDF
ElePods X ANC TWS Bluetooth Earphones User Manual – Original PDF

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals