OSCAL S60-S60 Pro 4GB-32GB Green Phone User Guide
- June 9, 2024
- OSCAL
Table of Contents
OSCAL S60-S60 Pro 4GB-32GB Green Phone
Scheme
Instruction
User manual:
Thank you for purchasing this product. Individual parameters, description by
figures and design in the manual may differ depending on the version and
updates.
Printing errors reserved.
Please visit www.iget.eu for exact parameters and
additional product information. Printing errors reserved.
Update your device as soon as a new version of software is available.
The buyer is obliged to provide a serial number on the warranty card as well
as in the delivery note and the proof of purchase. In this context, the buyer
acknowledges that unless the serial number of goods is not marked on the proof
of purchase, delivery note and in the warranty card and therefore it cannot be
possible to compare this serial number marked on goods and its protective
packaging with the serial number stated in the warranty card, delivery note
and the proof of purchase and thus to verify that the goods runs from the
seller, the service center is competent to claim such a goods automatically
and reject it immediately. The buyer must instruct all persons to whom the
goods would be subsequently sold. Product complaints do with your dealer if
you are not on the web www.iget.eu indicated otherwise.
Safety use
Oscal S60/S60 Pro has an increased resistance. However, it is not mechanically
undestroyable. The display is made of tempered glass, which ensures higher
resistence against scratches. When dropped on a hard surface or sharp object,
it may crack. The display cracked due to mechanical damage or improper misuse
of the device is not covered by warranty.
The Oscal S60/S60 Pro has the IP68 and IP69K certification under ISO
20653:2013 standard.
(According to the manufacturer, up to 1.5 m to a depth of 30 minutes. The IP68
resistance does not apply to salt water or any other chemical additives, such
as cleaning substances!)
The phone also has IP69K certification and military standard certificate MIL-
STD-810G. The IP68 protection does not guarantee 100% resistance to water in
all conditions.
We also recommend to not to charge the phone and dry the phone´s connector
after contact with water or other liquid with the adequately warm air
flow (up to 40°C).
Outside the charging time, always keep the input for the charging connector
and headphones properly closed with the cover.
The warranty is not applied to an intentional damage to the phone.
Warning – the microphone is located on the bottom of the phone, when overlapped (eg with your hand), the other side will not hear or will hear very poorly.
Installing the SIM NANO card and microSD cards
Switch your phone off before installing the card.
- Carefully pull the SIM card holder from the side of the phone, insert the cards into the drawer, so they fit into the place and then put the drawer back into the phone.
- You can use the 2x NANO SIM or 1x NANO SIM and 1x microSD card, according to diagram.
Charging the battery:
Before putting your phone into service you must recharge its battery for 100%.
- Connect the adapter to the charger.
- Connect the charger to the wall outlet.
- If the battery is fully charged, disconnect the phone from the charger.
Switching the phone on / off / sleep mode Make sure that the phone has a SIM
card and the battery is fully charged.
Press and hold the ON/OFF button to switch on the phone.
Switch off the phone by pressing and holding ON/OFF button and select OFF.
Press shortly ON/OFF button to switch the phone over to the sleep mode.
Safety Precautions:
Do not use your phone while driving
Do not use your phone at the petrol stations. Hold the phone at least 15 mm
from your ear and body. The phone produces a bright or flashing light.
The small parts of the phone can cause suffocation.
Do not expose your phone to open fire.
The phone can produce a loud sound.
The phone is not resistant to fillings.
Avoid exposure to magnetic fields.
Keep the phone away from medical devices.
On request, turn off your phone in hospitals and other medical facilities.
Keep the phone dry.
On request, turn off the phone at airports and on planes.
Do not dismantle the phone.
Turn off the phone in the vicinity of explosive materials and chemicals.
Use the phone only with certified equipment.
Do not reckon only upon your phone during emergency situations.
The phone contains a label that detects moisture. In case of moisture inside
phone this label becomes red. The manufacturer has the right to reject a
warranty with such a damaged phone.
Damages requiring professional repair:
If such cases may occur, please, contact the authorized service or your
distributor:
Moisture got into the phone.
The phone is mechanically damaged.
The phone is extremely overheated.
For household use: The given symbol (crossed-out wheeled bin) on the
product or at accompanying documents means that used electrical and electronic
products should not disposed of with household waste. To ensure proper
disposal of the product, hand it over to a designated collection point, where
it will be accepted free of charge. The correct disposal of this product will
help to save valuable natural resources and prevent any potential negative
impacts on the environment and human health, which could otherwise be caused
by inappropriate disposal of wastes. For more details, please, contact your
local authorities or the nearest collection point. The improper disposal of
this waste can be penalized in accordance with national regulations.
Information for users to disposal of electrical and electronic devices
(corporate and business use): For proper disposal of electrical and electronic
devices, ask for details from your dealer or distributor. Information for
users to disposal of electrical and electronic devices in other countries
outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only
in the countries of EU. For proper disposal of electrical and electronic
devices, ask for details from your authorities or dealer. All is expressed by
the symbol of crossed-out wheeled bin on product, packaging or in printed
materials.
Set up the claim for warranty repair of device at your dealer. If you have
technical questions or problems, contact your dealer. Follow the rules for
working with electrical equipment. The user may not dismantle the device or
replace any part of this. There is a warranty seal inside the phone to verify
that the phone does not carry signs of improper intrusion. Opening or removing
the covers poses the risk of electric shock. In case of incorrect reassembly
and subsequent connection you are also exposed to electric shock.
Declaration of Conformity:
Company INTELEK.CZ s r.o. hereby declares that all Oscal S60S60/Pro devices
are in compliance with essential requirements and other relevant provisions of
Directive 2014/53/EU. The full text of the EU Declaration of Conformity is
available on this website www.iget.eu.
The warranty period of the product is 24 months, unless stated otherwise.
This device can be used in the following countries:
Restrictions on WiFi use
Italy – The conditions for using the WiFi network are described in the so-
called Electronic Communications Code
Norway – The 2.4 GHz limitation applies only to the area 20 km from colony of Ny-Ålesund.
5G WiFi: When using a radio device in the 5150 – 5350 MHz frequency
range, use is limited to indoor spaces only.
RoHS: The components used in the device meet the requirements on the
restriction of hazardous substances in electrical and electronic devices in
accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded
from www.iget.eu.
Operation of radio equipment:
CZ: This radio equipment can be operated in the Czech Republic under the
General Authorizations VO-R / 1 / 05.2017-2 and VO-R / 12 / 09.2010-12.
SK: This radio equipment can be operated under General Authorizations VPR
– 07/2014, VPR – 02/2017 and VPR – 35/2012.
Maximum EIRP: Max. 2 W
Frequency range:
- GSM: 900/850/1800/1900 MHz
- WCDMA: 900/850/1700/1900/2100 MHz
- LTE: 2600/2300/2100/1800/900/800 MHz
2.4G WiFi (20 MHz): 2412 – 2472 MHz
2.4G WiFi (40 MHz): 2422 – 2462 MHz
5G WiFi: (H20) 5180 – 5240 MHz
5G WiFi: (H40) 5190 – 5230 MHz
5G WiFi: (H80) 5210 MHz
Exclusive importer of iGET products to EU: Headquarter: INTELEK.CZ s r.o.,
Olivova 2096/4,
Nové Město (Praha 1), 110 00 Praha, CZ Branch: INTELEK.CZ s r.o., Ericha
Roučky 1291/4,
627 00 Brno, CZ
WEB: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright © 2022 INTELEK.CZ s r.o.
All rights reserved.
References
- KOMPONENTY DATOVÝCH A TELEKOMUNIKAČNÍCH SÍTÍ | Intelek
- iGET chytré zabezpečení a spotřební elektronika
- iGET chytré zabezpečení a spotřební elektronika
- Helpdesk redirect - iGET.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>