Alpenf hn 84000000053 Sella CPU Cooler Installation Guide
- June 9, 2024
- Alpenf hn
Table of Contents
Alpenfhn 84000000053 Sella CPU Cooler Installation Guide
CAUTION
- All specifications subject to change without notice.
- Under no condition shall Alpenfohn be liable for any indirect, incidental or consequential damages arising from any defect or error in this manual or product.
- Please ask for professional help if you are not sure of safe installation.
- Please read the safety instructions on our website before you install the product: info.ekl.eu
COMPONENTS LIST
- Fan Wire Clip 2 pcs
- Fan 1 pc
- De-Vibration Buckle 4 pcs
- Thermal Grease 1 pc
- Push-pin 4 pcs
- Clip 4 pcs
- Mounting Bracket 1 pc
INTEL LGA 115x, 1200, 775 Installation
-
Evenly apply a thin layer of thermal grease onto the processor.
-
As illustrated, insert the clips into the mounting bracket according to the socket type.
-
Put the mounting bracket on the motherboard with the clips in the motherboard mounting holes.
-
Insert the push-pins into the clips, push them tight until the mounting brackets are safely installed on the motherboard.
-
As illustrated, put the heatsink onto the processor and hook the vertical clip onto the retention frame tab.
-
Press down the other side clip and hook it onto the tab, too. Please ensure perfect contact between the heatsink base and the CPU surface during installation.
-
Attach the fan which is already assembled with De-vibration buffer to the heatsink with wire clips.
-
Finish the installation by connecting the fan cable to the motherboard.
AMD AMS, AM4, AM3(+), AM2(+) Installation
-
Evenly apply a thin layer of thermal grease onto the processor.
-
As illustrated, put the heatsink onto the
processor and hook the vertical clip onto
the retention frame tab.
-
Press down the other side clip and hook it onto the tab,too.Please tl ensure perfect contact between the heatsink base and the CPU surface during installation.
-
Attach the fan which is already assembled with De-vibration buffer to the heatsink with wire clips.
-
Finish the installation by connecting the fan cable to the
motherboard.
EKL AGNadlerstr. 8-10 88299 Leukirch
www.alpenfoehn.de
Made in China