waterpik WP-564 Water Flosser User Guide
- June 17, 2024
- Waterpik
Table of Contents
waterpik WP-564 Water Flosser
Register your product and receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/vid560 to watch How To Video
Unit Prep
- A. Charge the unit for 4 hours by placing the magnetic charger on the front of the unit.
- B. Insert tip until it clicks into place. To remove the tip, push the tip eject button.
- C. Lift the flip top on the reservoir and fill it with warm water. Refill as needed.
Water Floss
- A. Press the mode button to adjust pressure. Start on low pressure and increase to your liking.
- B. Turn the power ON. Close lips enough to prevent splashing. Keep the unit upright during use to ensure continuous water flow.
- C. Aim water at the gumline at a 90-degree angle. Follow the gumline and pause briefly between teeth.
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
This device is only compatible with voltages of 100-240 VAC, 50/60Hz
©2017 Water Pik, Inc.
WP -560/562/563/564/565/566/569
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>