OSCAL AIRBUDS6 Bluetooth 5.3 Headset TWS Wireless Earphones User Guide

OSCAL AIRBUDS6 Bluetooth 5.3 Headset TWS Wireless Earphones

Product Information

The product is a DXWLRQ with multiple FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVODSSURYHGE WKHSDUWUHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHU. It is designed to provide efficient and reliable functionality for various tasks.

Product Usage Instructions

1. Make sure that the GHYLFH is properly connected and powered on.
2. Check that the ‘&&,’$’;$,5%8’6 is functioning correctly.
3. For H[SRVXUHUHTXLUHPHQW, follow these steps:
4. Ensure the GHYLFH is in the correct mode for FRQGLWLRQ ZLWKRXWUHVWULFWLRQ.
5. Use the GHYLFH to navigate through the options and select the desired settings.
6. Press the appropriate button to confirm your selection.
7. To SURGXFWGHVLJQ, follow these steps:
8. Make sure the GHYLFH is properly synchronized with the FKDUJLQJER.
9. Follow the instructions provided in the manual to initiate the SURGXFWGHVLJQ process.
10. In case of any issues or questions, refer to the detailed instructions provided in the manual or contact customer support for assistance.

Product Introduction

Device Connection

1. Open the cover of the charging box and a pair of headsets are in the charging box. When the indicator light of the charging box is green and the indicator light of the headset is red and blue, the headset enters the “Pairing State”.
2. Tum on bluetooth of the device and select “AirBus 6”; Click it and after the connection is successful, there will be a voice broadcast with a connection prompt tone.
   Note : The above is the first pairing method. In subsequent use, the earbuds will be automatically turned on and connected after being taken out of the earbuds box.

Specification Parameters

• Model: AirBuds 6
• Bluetooth version: 5.3
• Battery type: Polymer Lithium Battery
• Effective receiving distance of bluetooth: 1 Om
• Bluetooth frequency: 2.402 – 2.485 GHz
• Moving coil specification: ¢> 13mm
• Dynamic frequency response: 20Hz-20KHz
• Battery capacity (charging box): 320 mAh
• Charging time (charging box): < 1.5 hours
• Charging lime (headsets):< 1.5 hours
• Running time: 5 hour

Operation Method

S1artSiri

| Long press the “Touch” button for 1 second and (hear “beep’ sound) release
Pause/ play music| Double click the “Touch” button
Last one| Triple click the “Touch” button| ****

I

| None
Next one| None| ****

I

| Triple click the “Touch” button
Answer| Double click the “Touch” button when an incoming call comes in
Hang up| Double click the “Touch” button during a call

Reject

| Long press the button for 2S (hear the “beep” sound) release during the incoming call status
volume plus| None| ****

I

| Single click the “Touch” button
volume down| Single click the “Touch” button| ****

I

| None
Restore factory settings| Click the “Touch’ button four times

Charging with Charging Box

The headset can be charged in the charging box through the type-C interface, and the white light flashes during charging When the .headset is fully charged, the

Light Indication

Answers for Common Questions

1. The bluetooth headset cannot be switched on. Reason: The battery in the charging compartment is low or the power of the bluetooth headset is low. Solution: Put the headset into the charging box, close the cover, and charge the charging box for more than 1 hour before use.

2. The phone cannot search for bluetooth headset. Reason: 1. The Bluetooth headset is not in the pairing state;
   Solution: Put the headset back into the charging box, close and then open the cover, wear the headset, and the headset (i.e. the red and blue lights flash alternately) enters the bluetooth pairing state; You can also click the “Touch” button for four times (the headset power off) to reset it.
   Reason:2. There are mobile phone bluetooth program errors;
   Solution: After the bluetooth of the mobile phone is restarted, clear all pairing data stored in the the mobile phone; Search for bluetooth again.

3. There is no sound from the headset speaker Reason: 1. Turn the volume of the mobile phone and headset to the maximum and confirm whether it is caused by volume adjustment.
   Solution: When the headset is connected, adjust the volume of the mobile phone;
   Reason: 2. The Bluetooth headset is not properly connected with the mobile phone.
   Solution: Reconnect bluetooth and mobile phone through pairing.
   Reason: 3. The Bluetooth headset is not within the valid working range.
   Solution: Keep the headset within 10 meters of the mobile phone, and there are no large objects, walls and other obstacles between the headset and the device.

4. The headset doesn’t send messages or the voice is low.
   Reason: 1. The Bluetooth headset is too far from the mouth;
   Solution: The bluetooth headset should be worn on the ear for normal use;
   Reason: 2. The microphone hole of Bluetooth is blocked or water has entered;
   Solution: Remove the blockage of the microphone hole or prevent water from entering the microphone hole.

5. The headphone get stuck or disconnected when talking or listening to music.
   Reason: 1. The Bluetooth headset is too far away from the mobile phone or there are obstacles.
   Solution: 1. Keep the headset within 10 meters of the mobile phone, and there are no large objects and walls between the headset and the device. Be careful not to cover the bluetooth headset with your hand. In order to maintain the continuous stability of the signal, please try to keep the bluetooth and the mobile phone in the same direction.
   Reason: 2. There is a problem with the bluetooth signal of the mobile phone or there is strong signal interference nearby.
   Solution: It is best not to make the mobile phone close to metal objects. You can also change another mobile

6. There is no sound in the headset during voice call, and the sound comes out of the mobile phone. Reason: The headset is operated during a voice call or call. Double click the headset.
   Solution: Turn off the bluetooth of the mobile phone and then turn it on, or put the headset into the box, close the cover, tum off the headset and then open the cover; The headset does not support the connection or hanging up of voice calls. If there is a voice call, please connect or hang up on the mobile phone.
   (Note: at present.the headset only supports incoming calls from GSM cards, not app network calls.)

7. After the headset is put into the box and the cover is closed, the headset is not disconnected. Reason: 1. The charging box is completely dead; Solution: Charge the charging box;
   Reason: 2. The headset is not put into the box properly, and the communication between the headset and the base is abnormal.
   Solution: Reopen the charging box, take out the headset from the box, and then put it into the box. When the headset is put into the box, the green light on the charging box will light once and close the cover.
   Reason: 3. The charging box is damaged.
   Solution: Replace the charging box.

Attention

• Please do not disassemble this product by yourself.
• Please use standard charging cable and adapter to avoid damage and accidents.
• Please aviod using corrosive cleaning detergent to clean this product.
• Please avoid product usage in the rain and keep away from heating or fire.

Maintenance

Please follow the following suggestions to prolong product working life.

• Keep product dry and don’t put in damp places in case of affecting internal circuit.
• Aviod product usage during intense sporting or on sweating occasions in case sweat infiltrate into product and cause damages.
• Keep off sunlight or high temperature in case of shortening working life of electric parts battery damage, plastic parts deformation.
• Keep off intense vibration and impact from hard material in case of internal circuit damages.

FCC

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device(FCC ID: 2A7DX-AIRBUDS6) has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Due to product design, FCC ID can only be printed on the charging box.

www.oscal.hk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>