OSCAL TIGER 12 Series 6.78 Inch 120Hz Display 8 Plus 128GB Smartphone User Guide

OSCAL TIGER 12 Series 6.78 Inch 120Hz Display 8 Plus 128GB Smartphone

Specifications

• Model: TIGER 12 Series
• Front Camera Receiver
• Screen
• Microphone
• Headphone Jack
• Speaker
• Type-C Port
• SIM/TF Card Slot
• Camera
• NFC
• Flashlight
• Volume+ Volume-
• Power Fingerprint Scanner

Product Usage Instructions

How to insert the card

1. Press the card pin into the side hole to pop out the card tray.
2. Place the Nano card or Nano card and TF card with the metal side facing down in the card slot.
3. Ensure the bevel angle of the card aligns with the slot’s bevel angle and insert the cardholder into the phone following the arrow direction.

How to boot

1. For a non-removable battery, press the power button for 3-5 seconds to boot up the device.

How to send SMS and MMS

• SMS:

1. Open the SMS app.
2. Select New Information.
3. Enter a phone number or browse your contacts.
4. Select Edit Information, enter your text, and send.

• MMS – video:
  When composing a text message, you can take a new picture or video and send it immediately.

Language switching settings
To switch languages, navigate to Main menu > settings > system setting > language and input method. Select the desired language and confirm.

SAR (Specific Absorption Rate)
The SAR of this product is 2.0W/kg, compliant with national standards GB 21288-2007.

Safety Guidelines

• Maintain a distance of at least 15 cm from medical implants while using the device.
• Avoid exposing the device to high temperatures or heat sources to prevent overheating and potential hazards.
• Disconnect the charger after charging is complete.
• Avoid using unapproved power sources to prevent accidents.
• Handle the battery carefully to avoid damage or leakage.

Maintenance

Follow the manual instructions for maintenance to extend the service life of the mobile phone.

OVERVIEW

How to insert the card

• To make sure your smartphone be able to call, put the SIM card in the following order.
• Press the card pin into the side hole and then the card tray pops up and pull out it.
• Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
• Insert the card holder into the phone in the direction of the arrow.

How to boot

• Non-removable battery
• Press the power button for 3-5 seconds to boot

How to send SMS, MMS

SMS

• Open the SMS app
• Select New Information
• Enter a phone number or browse your contacts Select Edit Information and enter your text
• Send

MMS – video

• When writing a text message
• You can take a new picture or video right away.
• Selecting or sending

Language switching settings

• Main menu–settings-system setting– language and input method
• Language and input method–language–language adding
• Select the language you need, the system will automatically jump back to the language interface
• Select the icon after the language bar and drag it to the FIRST ONE

SAR

• The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg.
• In line with the requirements of the national standard GB 21288-2007.

Safety- To ensure safely using the product, you must strictly abide by the following rules

• The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
• If the device is equipped with a non-removable battery,  do not replace the battery yourself to avoid damaging the battery or device.
• Use of an unapproved or incompatible power source,  hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage,
• Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
• Hereby, Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://ww-
  w.oscal.hk/ce/

Maintenance

• Thoroughly understand the maintenance of this mobile and extend the service life of the mobile phone as much as possible.

• Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods.

• Please avoid falling, knocking or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure.

• Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.

• Clean the lens with a clean, dry, soft cloth.

• (Example: camera lens) and display.
  If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, the mobile phone will be forced to

• restart (unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.

• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been  fully charged to the charger for a long time, as overcharging will shorten the battery life.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of this Device TIGER 12(FCC ID: 2AOWK-TIGER12) has been tested against this SAR limit. SAR information on this can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device’s FCC ID number for the search. This device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, a 10mm separation distance should. maintained to the user’s bodies

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular installation.
Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC Caution
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is object to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

SAR Statement : The Tablet has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. During testing, Mobile Phone(IC: 25768-TIGER12) radios are set to their highest transmission levels and placed in positions that simulate uses against the -head. with-no separation, and when worn or-carried against the torso of the body, with 10mm separation. To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones, or other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range

SCAN

www.oscal.hk

Frequently Asked Questions

• Q: Where can I find the full EU declaration of conformity?
  • A: The full text of the EU Declaration of conformity is available at the following internet address: http://www.oscal.hk/ce/

References

• CE | OSCAL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>