MARVEL MRNP215-IS01A Nugget Ice Machine With Solid Door and Pump Owner’s Manual

MRNP215-IS01A Nugget Ice Machine With Solid Door and Pump

“`html

Specifications:

• Model: MRNP215-IS01A
• Product Type: Undercounter Refrigeration
• Weight Capacity for Integrated Panel: Up to 20 lbs (10 kg)

Product Usage Instructions:

Integrated Panel Dimensions:

When preparing an integrated panel for your Marvel undercounter
refrigerator, ensure the following dimensions are met:

• Width: 14 inches (376 mm)
• Height: 30 inches (764 mm)

Integrated Panel Preparation:

1. Cut the panels to the specified dimensions.

2. Optional: Stain or finish the panel according to your
   preference.

3. Optional: Install handles and hardware as needed.

Integrated Panel Installation:

1. Remove the door from the unit.

2. Align the door with the integrated panel on a flat surface and
   secure with clamps.

3. Remove gasket channel filler to access side holes.

4. Secure the door panel in place using 10 screws.

5. Reinstall the gasket channel filler.

6. Remove clamps and reattach the door to the unit.

FAQ:

Q: Where can I find the serial number of my Marvel undercounter

refrigerator?

A: The serial number is located on the back of the cabinet near
the top of the unit.

Q: What should I do if my integrated panel does not align

perfectly with the door?

A: Due to differences in surrounding cabinetry, perfect
alignment may not always be achieved. Ensure both sides of the
panel are finished to prevent warping and follow the installation
instructions carefully.

“`

OWNER’S GUIDE & SERVICE MANUAL
MARVEL UNDERCOUNTER REFRIGERATION
Model: MRNP215-IS01A

WELCOME

Welcome to the Marvel Experience!

Warranty Registration

Thank you for choosing our quality product to add to your home. We are thrilled to welcome you to our growing community of Marvel owners, who trust in our products and our support.
The information in this guide is intended to help you install and maintain your new Marvel undercounter model to protect and prolong its lifetime. We encourage you to contact our Technical Support team at 616-754-5601 with any questions.

It is important you register your product warranty after taking delivery of your appliance. You can register online at www.marvelrefrigeration.com.

The following information will be required when registering your appliance: Serial Number Date of Purchase Dealer’s name and address

Online registration available at
marvelrefrigeration.com

Got a Marvelous Design?
We would love to see how your Marvel product looks in its new home. You can send us photos of your installed product at marketing@marvelrefrigeration.com, and we might feature your Marvel home design on our website and social media!

The serial number is located on the back of the cabinet near the top.

INTEGRATED PANEL DIMENSIONS

Integrated Panel

Integrated Panel Dimensions

NOTE
Due to differences in surrounding cabinetry, the panel may not perfectly align with door. The procedure below is designed to prepare a finished integrated panel that seamlessly integrates with surrounding cabinetry.
The door panel must not weigh more than 20 lbs (10 kg).
It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.
When applying an integrated panel to a unit, ensure that both sides are finished in order to prevent warping.
A full integrated door panel completely covers the door frame and provides a built-in appearance.
Integrated Panel Preparation
1. Cut the panels to the dimensions listed in the diagram below. For optimal results, have a qualified carpenter verify all measurements.
2. Optional: Stain or finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
3. Optional: Install handles and hardware.

BACK SURFACE MUST HAVE AMPLE FLAT SURFACE

TO MOUNT OVERLAY PANEL FLAT AND WITHOUT 3/4″

INTERFERENCE

(19 mm)

14 / ” (376 mm)

30 / ” (764 mm)

3

INTEGRATED PANEL INSTALLATION
Prepare Integrated Panel
1. Remove door from unit (see Door Reversal) 2. On a flat surface, line up the door to the integrated door
panel and clamp. 3. Remove gasket channel filler to expose side holes. 4. Intall 10 screws to secure door panel.
5. Reinstall gasket channel filler. 6. Remove clamps. 7. Reinstall door to unit (see Door Reversal)
4

References

• Schilderwerken Ieper | Color by Cherchye: gevelrenovatie, decoratie, kaleien

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>