KEF T101 Satellite Speaker User Guide
- June 3, 2024
- KEF
Table of Contents
KEF T101 Satellite Speaker
Specifications
- DIMENSIONS: 140 X 330 X 35 mm (5.5 x 13.0 x 1.4 in.)
- WEIGHT: 2 pounds
- FREQUENCY RESPONSE: 80Hz – 30kHz
- AMPLIFIER: 10-100W
- DESIGN: Ultra-Thin Satellite
- CROSSOVER FREQUENCY: 7kHz
- IMPEDANCE: 8 ohms
- DESIGN: Two-way closed box
- DRIVE UNITS: 5 mm (4.5in.) dual layer MF 25mm ( I in.) aluminum HF
Introduction
Thank you for purchasing the T Series. We are confident that it will provide reliable, high performance sound for many years to come. Please read this manual fully before you attempt any connections to the T Series.
Using the manual
The following icons are used throughout this manual to help you safely install your new speakers. Please follow them carefully.
Important points
- Follow this manual carefully for best results from your speakers
- Clean with a dry lint free cloth.
- Read and return warranty card.
- Do not use spirit based cleaners.
- Avoid damp
- Avoid temperature extremes.
- Avoid direct sunlight.
- SAFETY NOTICE! Trailing cables are dangerous, secure all cables.
Advisable cable length
Equipment provided
Attaching base
Connections
Positioning
*Not included
Wall mounting
Warning
Warning – No attempt should be made to install these loudspeakers unless you are sure that you will not be cutting through electric cables, water or gas pipes, or supporting joists.
Calibration
IMPORTANT
AV SPEAKER CONFIGURATION SETTINGS
These satellite loudspeakers must be used set as ‘SMALL’ in the bass management menu on the AV amplifier/receiver. Please refer to the table below.
Bass output must be sent to ‘SUBWOOFER’ not ‘MAIN’ or ‘BOTH.
This ensures that the system will reproduce high SPL, undistorted sound and is the correct set up for any small loudspeaker.
Failure to do this will reduce the sonic quality of your system and, over a long time period, could result in damage to the satellite loudspeakers since high level, low frequency signals are sent to the small satellite loudspeakers.
FREQUENTLY ASKED QUESTIONS
Does mounting hardware come with it?****
The hardware and very simple installation bracket are both included in the box.
Do they come with speaker stands?****
There are speaker stands provided. Wall mount plates are further provided.
How big should the screws be to suit the wall mounting bracket?****
Hex head 1/4″
They can mount horizontally, right?****
They can be positioned horizontally, yes.
Are KEF speaker’s high end?****
An array of high-end audio devices, including Hi-Fi speakers, subwoofers, architectural speakers, wireless speakers, and headphones, are designed and manufactured by the British business KEF.
Are satellite speakers good?****
Satellite speakers are an alternative to think about whether you’re searching for a low-cost or high-quality choice.
Do satellite speakers make a difference?****
Small to medium sized spaces benefit greatly from satellite speakers, which are frequently used in a 2.1, 5.0, or 5.1 configuration.
What is the difference between satellite and bookshelf speakers?****
By focusing on higher frequencies, satellite speakers enable the overall system to achieve lesser sound distortion. More frequencies can be handled by bookshelf speakers.
Is KEF worth the money?****
They are excellent all-rounders, don’t require much positioning, and are built to KEF’s exacting standards. They’re priceless if you have a healthy bank account.
How far away should satellite speakers be?****
For the greatest stereo image, the left and right front channels’ speaker placement should be at least 6-8 feet apart and create an equidistant triangle with the listener’s primary location.
Where should I place my satellite speakers?****
The front speakers in the room should be somewhat lower than the surround speakers.
Can I use satellite speakers for Atmos?****
Yes, as long as you can attach the speaker properly, you may use whatever speaker you choose. Other than the fact that they are placed over your head, overhead/height speakers for Atmos have no particular features.
How do satellite speakers get power?****
Yes, the majority of wireless speakers plug into standard power outlets or power strips using AC adaptors.