KEF Q950 Floorstanding Speaker Instruction Manual
- October 27, 2023
- KEF
Table of Contents
KEF Q950 Floorstanding Speaker
Specifications
- DESIGN: Two and a half-way bass reflex
- DRIVE UNITS: 130mm (5.25in.) aluminum Uni-Q, 25mm (1 in.) vented aluminum dome HF, 130mm (S.25in.) aluminum LF, 2 x 130mm (5.25in.) aluminum ABR
- FREQUENCY RANGE FREE FIELD (- 6DB): 45Hz
- FREQUENCY RESPONSE (±3DB): 58Hz-28 kHz
- CROSSOVER FREQUENCY: 5 kHz
- AMPLIFIER REQUIREMENTS: 15-130W
- SENSITIVITY (L.83V/LM): 87dB
- MAXIMUM OUTPUT: 110 dB
- NOMINAL IMPEDANCE : 8 ohms (min.3.50)
- WEIGHT: 5kg (32 lbs.)
- DIMENSION (H X W X D): 873 x 180×278 mm
- DIMENSION (H X W X D) *WITH PLINTH: 926×299 x310mm
OverView
When there isn’t much room, the outstanding Q Series floorstanding speakers shine. The Q550s, which feature the iconic KEF Uni-Q driver array, produce accurate, natural sound with exceptional clarity and precise bass. Music is delivered with astounding detail and passion via a polished 5.25 in.
The Uni-Q driver array is the brains behind the upgraded Q Series. KEF’s trademark innovation inserts the tweeter in the midrange cone’s acoustic center, bringing the realization of the acoustic ideal of a single point source closer than ever. In comparison to what is feasible with a standard speaker, the end result is a more precise, detailed, and three-dimensional sound image that is distributed more uniformly around the room. By covering the tweeter dome with KEF’s “tangerine” waveguide, Uni-ultra-wide Q’s dispersion is further improved. Lower treble performance is dramatically improved with the addition of the damped tweeter loading tube, which provides a gentle termination of sound produced from the back of the tweeter. A new low-distortion inductor on the crossover also produces cleaner bass. The Uni-Q driver has been moved to the center of the cabinet to reduce unwanted internal resonance and improve the resolution and purity of the Q Series bookshelf speakers. This also adds refinement to their sonic clarity and detail.
Introduction
Thank you for purchasing Q Series. We are confident that it will provide reliable, high performance sound for many years to come. Please read this manual fully before you attempt any connections to Q Series.
Important Points
- Follow this manual carefully for best results from your speakers.
- Read and return warranty card
- Clean with a dry lint free cloth
- Do not use spirit based cleaners.
- Avoid damp
- Avoid temperature extremes
- Avoid direct sunlight
- SAFETY NOTICE! trailing cables are dangerous, secure all cables
Plinth
Connections
Positioning
FREQUENTLY ASKED QUESTIONS
Are feet necessary to place them on a hardwood floor?****
Yes. They just have metal spikes on them. Purchase coaster plates or rubber feet for the spikes.
Are these done in vinyl or real wood veneer?****
Its veneer is genuine walnut.
Is this speaker noticeably superior to the Kef Q550? What distinguishes them?****
Power consumption for the Q950 and Q550 ranges from 130W to 200W. Q950’s LF drivers are 8′ long, whereas Q550’s are 5.25″ long. Lower bass frequencies will result for the Q950 as a result. Both have the unsurpassed purity of the KEF Uni-Q driver (HF (tweeter) and Mid-bass).
Do these speakers have Bluetooth?****
These speakers are passive, to be precise. To utilize these, you need an external amplifier.
Are there grills on hand?****
They are available but not included, is the response.
Is KEF Q950 worth it?****
One of the best speakers in the world, the KEF Q950 offers an unmatched soundstage and level of detail. They have an updated Uni-Q driver array that is intended to tame treble frequencies, a redesigned cabinet, and stylish new coatings.
What is KEF Q Series?****
The Q Series accurately mimics the subtleties of bass instruments. KEF drivers offer clearer bass at high volumes thanks to a larger roll surround and improved suspension. Midrange clarity is improved by a revised cone construction, and bass quality is improved by an upgraded Auxiliary Bass Radiator (ABR) with a new surround and rear suspension.
Are KEF speakers high-end?****
An array of high-end audio products, including Hi-Fi speakers, subwoofers, architecture speakers, wireless speakers, and headphones, are designed and manufactured by the British company KEF.
Are electro voice speakers good?****
The Electro-Voice ZLX-12BT is a contender that should be on your list if you’re looking for a loudspeaker. It has a reasonable price while still providing a wide variety of features. The performing musician or DJ will love the sturdy and robust style. Excellent audio quality is also present.
Why are KEF speakers good?****
The British company KEF designs and manufactures a wide range of high-end audio equipment, such as Hi-Fi speakers, subwoofers, architecture speakers, wireless speakers, and headphones.
Are KEF LSX audiophile?****
These are unquestionably fantastic for a high-end audiophile experience in your study or bedroom (preferably at a desk or table).
Are KEF speakers warm sounding?****
You simply can’t get enough of the crisp, warm, and smooth sound that this speaker creates, but that’s not all it can accomplish.
Where are electro-voice speakers made?****
The award-winning family of Electro-Voice portable loudspeakers is made up of individual members, each of which is designed and engineered in the USA to provide best-in-class performance in every way.
Are floorstanding speakers good?****
A nice floorstanding speaker will quickly enhance your sound system. They have a reputation for sounding incredible and look fantastic, drawing attention to a sound system and making it stand out rather than blend in.
Do heavier speakers sound better?****
Yes, compact speakers may have bigger size and cost advantages than larger speakers, but only if you select a high-end new model. Performance is improved by larger speakers over smaller ones. Additionally, everyone pays close attention to a speaker’s performance in general.
How do you tell if a speaker is fried?****
An unpleasant buzzing or scratching sound, either by itself or roughly at the pitch of the note the speaker is attempting to reproduce, is the most typical audible sign of a blown speaker. Or there can be absolutely no sound.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>