LABCONCO 3970225 2 Feet Purifier Filtered PCR Enclosure Owner’s Manual

September 23, 2024
LABCONCO

LABCONCO 3970225 2 Feet Purifier Filtered PCR Enclosure

LABCONCO-3970225-2-Feet-Purifier-Filtered-PCR-Enclosure-
product

Product Information

Specifications

  • Weight: 125.0 lbs
  • Weight metric: 57.0 kg
  • Dimensions: 24″ w x 28.6″ d x 36.8″ h
  • Electrical: 230V, 50/60 Hz, 2 A
  • Built-in Options: Airflow monitor, UV Light
  • Nominal Width: 2′
  • Region: International
  • Conformance: CE

Description

The Purifier Filtered PCR Enclosure with UV Light, Protection Panel, and Airflow Monitor is designed to provide a controlled environment for PCR procedures. It features built-in options such as an airflow monitor and UV light for added safety.

Features

  • Built-in Guardian Airflow Monitor
  • Available in 2′, 3′, and 4′ widths
  • Compliance with UL Standard 3101-1/61010-1 and CE Conformity marking

Usage Instructions

Installation

  1. Place the Purifier Filtered PCR Enclosure on a stable supporting base.
  2. Ensure the electrical requirements (230V, 50/60 Hz, 2 A) are met.
  3. If using optional accessories, install them as per the manufacturer’s instructions.

Operation

  1. P ower on the enclosure and ensure the airflow monitor is functioning properly.
  2. If using the UV light, follow safety guidelines for its operation.
  3. Perform PCR procedures within the enclosure according to standard protocols.

FAQ

  • Q: Can the Purifier Filtered PCR Enclosure be used with biohazardous materials?
    • A: No, the enclosure does not provide protection for users when handling biohazardous materials and should not be used in such scenarios.
  • Q: What is the electrical requirement for the Purifier Filtered PCR Enclosure?
    • A: The enclosure operates on 230V, 50/60 Hz, drawing 2 amps.

Overview

Purifier Filtered PCR Enclosures direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. These specialized vertical clean benches provide a controlled environment in which to perform polymerase chain reaction experiments. These enclosures include a variable digital timer that provides UV light exposure continuously or in user-selected increments of 5, 10, 15, 30, 60, 120 or 240 minutes to deactivate DNA and RNA contaminants. When the set time expires, the UV light automatically switches off in preparation for the next experiment. Purifier Filtered PCR Enclosures do not provide protection to the user and should not be used in conjunction with biohazardous material, toxins or radionuclides. Purifier Filtered PCR Enclosures are available in 2, 3 and 4′ widths. Labconco also offers Purifier Horizontal Clean Benches that direct HEPAfiltered air horizontally over the work area and Purifier Vertical Clean Benches that direct HEPA-filtered air down over the work area.

Specifications

  • Weight: 125.0 lbs
  • Weight metric: 57.0 kg
  • Dimensions: 24″ w x 28.6″ d x 36.8″ h
  • Electrical: 230V, 50/60 Hz, 2 A
  • Built-in Options: Airflow monitor, UV Light
  • Nominal Width: 2′
  • Region: International
  • Conformance: CE

Description

Compliance

  • UL Standard 3101-1/61010-1 (115 volt models)
  • CAN/CSA Standard C22.2 No. 1010.1 conformity (115 volt models)
  • CE Conformity marking (230 volt models

Features

  • Nominal downflow velocity of 45-65 fpm
  • Aerodynamic air foil
  • Supply HEPA filter, 99.99% efficient on particles 0.3 micron
  • ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
  • Disposable prefilter
  • Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
  • Intrinsically-sound, negative pressure design
  • Minihelic pressure gauge
  • Air diffuser
  • UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
  • UV-opaque and resistant 1/4″ thick tempered safety glass sash and sides
  • Fluorescent lamp
  • 254 nm UV lamp with interlocked UV protection panel
  • Variable digital timer for UV exposure with eight settings in minutes of 5, 10, 15, 30, 60, 120, 240 and continuous
  • Blower and 3-way light (flourescent, UV and off) switches
  • 9.4″ high sash opening
  • Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20″ and has wiping
  • seals to promote ISO Class 5 conditions
  • Two utility ports with iris openings and plugs
  • ETL Listing (115 volt, 60 Hz models)
  • One year warranty on parts and service

Options

  • Built-in Guardian Airflow Monitor that continuously monitor downflow airflow and has two LED lights to indicate when airflow is within or outside set point range. 2′, 3′ and 4′ widths
  • International electrical configurations

Required Accessories

  • Supporting base. See Adjustable Height Base Stands
  • Supporting work surface. See Solid Epoxy Dished Work Surfaces

Optional Accessories

  • General Accessories

For Product Assistance

International Customer Service

Eric Liu

  • Regional Sales Manager, Asia

Contact

  • Labconco Corporation
  • 8811 Prospect Avenue
  • Kansas City, MO 64132-2696
  • Phone: 816-333-8811

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LABCONCO User Manuals

Related Manuals