LABCONCO 112537002 5 XL Floor Mounted Hood Owner’s Manual

: June 2, 2024
: LABCONCO

Table of Contents

5′ XL Floor-Mounted Hood with Vertical Rising Sash, 55.7″ Depth, 2
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

5′ XL Floor-Mounted Hood with Vertical Rising Sash, 55.7″ Depth, 2

Service Fixtures, 1 GFCI Duplex

View online: https://www.labconco.com/product/5-xl-floor-mounted-hood-with- vertical-rising-sash-557-depth-2-service-fi/5583

Overview

Protector XL Floor-Mounted Laboratory Hoods (sometimes called Walk-In Hoods) accommodate laboratory procedures that require oversized equipment or maximum working height. Models with vertical-rising sashes meet the SEFA-1 standard of a low velocity high performance hood and may be operated as low as 60 fpm. Models with horizontal-sliding sashes have a loading height of 73.5″ (186.7 cm), suitable for applications requiring tall distillation racks, extraction apparatus or large drums.

Floor-mounted fume hoods are shipped partially unassembled and require some field assembly (not provided by Labconco). They are shipped on 2-3 pallets, requiring placement of lower and upper portions, installation of corner posts, baffles, header, and sashes, and connection of piping and electrical (if included). Detailed instructions are available upon request.

Catalog Number: 112537002

Specifications

Weight: 875.0 lbs
Weight metric: 397.0 kg
Dimensions: 60.0″ w x 55.7″ d x 95.0″ h
Dimensions metric: 152.4 x 141.5 x 241.3 cm
Electrical: 115V, 60 Hz
Product Subcategory: General Chemistry
Nominal Width: 5′
Sash Movement Direction: Vertical Rising
Air Usage/Static Pressure with Top Sash 62.5% Open:
100 fpm: 595 CFM at 0.13″ H2O s.p.,
60 fpm: 360 CFM at 0.05″ H2O s.p.,
80 fpm: 480 CFM at 0.09″ H2O s.p.
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
Electrical Duplexes: 1
Enclosure Height: 95.0″
Lighting: LED
Service Fixtures: 2
Style : Floor-Mounted

Description

Models Feature

By-pass airflow design
By-pass block
Glacier white powder-coated steel exterior
Chemical-resistant molded composite panel liner and baffle
Opti-Zone Baffles with flame spread less than 25 per ASTM E84. Baffles are removable for cleaning
Removable front and side panels and exterior and interior service access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
73.5″ (187 cm) high sightline from the floor to the header panel
4′, 5′, 6′ and 8′ models have two tempered safety glass vertical-rising sashes with powder-coated aluminum sash handles and powder-coated steel sash tracks with Clean-Sweep slots. Upper sash handle also includes Clean-Sweep openings
8′, 10′, 12′ and 16′ models have four tempered safety glass horizontal-sliding sashes with powder-coated aluminum sash tracks
Vertical-rising sash models have 63.6″ (162 cm) loading height
Horizontal-sliding sash models have 73.5″ (187 cm) loading height
Factory prepared for up to eight service fixtures including two gooseneck faucets
Factory prepared for up to four electrical duplex receptacles and an airflow monitor
Powder-coated, stainless steel 12.8″ ID exhaust connection(s)
Shipped in multiple sections: top, bottom and sashes

Fixtures Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8′ and larger models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side