LABCONCO 160605121 6 Protector ClassMate Laboratory Hood Instructions

: June 2, 2024
: LABCONCO

Table of Contents

LABCONCO 160605121 6 Protector ClassMate Laboratory Hood
Product Information
Product Usage Instructions
Overview
Specifications
Description
- Features
- Optional Accessories
For Product Assistance
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LABCONCO 160605121 6 Protector ClassMate Laboratory Hood

LABCONCO-160605121-6-Protector-ClassMate-Laboratory-Hood-
product

Product Information

Specifications

Weight: 610.0 lbs (276.7 kg)
Dimensions: 72.0″ w x 32.7″ d x 59.0″ h (182.9 x 81.9 x 149.9 cm)
Electrical: 208-230V, 50/60 Hz, 5A
Product Subcategory: Educational
Nominal Width: 6′
Sash Movement Direction: Combination (Vertical & Horizontal)
Region: International, U.S. and Canada
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
Lighting: LED
Service Fixtures: 2
Style: Benchtop

Description

Features (All Models)

Vertical-Rising Sash Models Feature:

Sash stop at 18″ height from the work surface (60% open).
The fully open sash is 28″ from the work surface.

Combination Sash Models Feature:

Combination horizontal-sliding/vertical-rising sashes.
Sash stop at 14″ height from the work surface (50% vertical opening).
The fully open sash is 28″ from the work surface.

Fixtured Models May Feature:

Two pre-plumbed service fixtures with forged brass valves.
One pre-wired GFCI electrical duplex receptacle.

Required Accessories (Not Included)

Remote blower
Ductwork
Work surface
Base cabinet or stand

Optional Accessories

Service Fixtures Kits
Electrical Duplex Kits
Distillation Grid Kits
Guardian Airflow Monitors
Upper Rear Finish Panel Kits
Dual Exhaust Adapter

Product Usage Instructions

Setting Up the Hood:

Place the hood on a stable surface in a well-ventilated area.
Ensure all required accessories are available for installation.

Operating the Hood:

Turn on the remote blower before using the hood to ensure proper airflow.
Open the sashes to your desired position based on the model type.

FAQ (Frequently Asked Questions)

Q: Can the sash height be adjusted?
A: Yes, the sash height can be adjusted on specific models. Refer to the user manual for instructions on how to modify the sash height.
Q: What are the electrical requirements for the hood?
A: The hood requires a power supply of 208-230V, operating at 50/60 Hz with a current rating of 5A. Ensure the electrical outlet meets these specifications before connecting the hood.

6′ Protector ClassMate Laboratory Hood
View online: https://www.labconco.com/product/6-protector-classmate- laboratory-hood-12/6780.

Overview

The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing windows provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not obstruct visibility when hoods are placed back-to-back in an island configuration.
Fully featured with baffle and airfoil, this high-performance by-pass hood maintains safe airflow while conserving energy. The Protector ClassMate Hood is a benchtop design and is offered in 4′, 5′, and 6′ widths. Models with combination style sashes are also available.
- Catalog Number: 160605121

Specifications

Weight: 610.0 lbs
Weight metric: 276.7 kg
Dimensions: 72.0″ w x 32.7″ d x 59.0″ h
Dimensions metric: 182.9 x 81.9 x 149.9 cm
Electrical: 208-230V, 50/60 Hz, 5A
Product Subcategory: Educational
Nominal Width: 6′
Sash Movement Direction: Combination (Vertical & Horizontal)
Region: International, U.S. and Canada
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
Lighting: LED
Service Fixtures: 2
Style: Benchtop

Description

Features

Features (All Models)

SEFA 1 High-Performance Hood.
Patented design.
By-pass airflow design.
Glacier white powder-coated steel frame.
Ergonomic air foil with aerodynamic Clean-Sweep airflow openings.
Low-profile, ADA-compliant spill trough.
Clear, 1/4″ thick, tempered safety glass sides, back and removable baffle.
5° angled, 1/4″ thick tempered safety glass stationary viewing panel and 3/16″ thick chain-driven sash with anti-racking shaft and powder-coated steel frame that provides 37.5″ high visibility.
Powder-coated sash handle with aerodynamic Clean-Sweep airflow openings.
High-performance, 3-piece glass baffle that pivots for cleaning.
Cord-keeper slots on the left and right side of the airfoil.
Pre-wired LED lighting, light switch and blower switch.
Powder-coated stainless steel tissue screen located directly below exhaust outlet.
Removable front panel, side panels and interior cover plates for access to plumbing and electrical wiring.
Powder-coated stainless steel 12.81″ ID exhaust connection.

Vertical-Rising Sash Models Feature
Sash stop at 18″ height from the work surface (60% open). Can be field modified to 14″ from the work surface. The fully open sash is 28″ from the work surface.

Combination Sash Models Feature

Combination horizontal-sliding/vertical-rising sashes that allow the operator to use the hood with the sashes half open either horizontally or vertically.
Sash stop at 14″ height from the work surface (50% vertical opening). Can be field modified to 18″ from the work surface. The fully open sash is 28″ from the work surface.

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on the lower right side.

Required Accessories (Not Included)