LABCONCO 111800002 Protector XL Benchtop Laboratory Hood Owner’s Manual

: June 2, 2024
: LABCONCO

Table of Contents

LABCONCO 111800002 Protector XL Benchtop Laboratory Hood
Usage Instructions
FAQ
Overview
Specifications
Features
For Product Assistance
contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LABCONCO 111800002 Protector XL Benchtop Laboratory Hood

Specifications

Weight: 675.0 lbs (306.0 kg)
Dimensions: 96.0″ W x 31.7″ D x 59.0″ H (243.8 x 80.5 x 149.9 cm)
Electrical : 100-115 volts, 50/60Hz, 10 amps
Product Subcategory: General Chemistry
Nominal Width : 8′
Blower Requirements : Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
Electrical Duplexes: 1
Enclosure Height: 59.0″
Exterior Depth : 31.7″ (80.5 cm)
Lighting : LED
Service Fixtures: 2
Style: Benchtop

Description

The Protector XL Benchtop Laboratory Hood is a general chemistry hood that offers superior design flexibility. It is designed to operate at face velocities as low as 60 fpm and meets the SEFA-1 standard of a low velocity high-performance hood.

Features

Containment-enhancing features
Available in widths from 3 to 16 feet and three depths
Operates at low face velocities
Suitable for various installation and application requirements

Usage Instructions

Installation

Choose a suitable location for the benchtop laboratory hood.
Ensure proper electrical supply meets the specifications provided.
Assemble the hood following the manufacturer’s instructions.
If required, connect to a remote blower and ductwork.

Operation

Turn on the electrical supply.
If equipped with LED lighting, switch it on for better visibility.
Adjust the face velocity as per your requirements.
When conducting experiments, ensure proper containment within the hood.

Maintenance

Regularly clean the interior and exterior surfaces of the hood.
Replace filters as recommended by the manufacturer to maintain performance.
Check electrical connections periodically for any signs of wear or damage.

FAQ

Q: Do I need to purchase additional accessories for the Protector XL Benchtop Laboratory Hood?
A: Some required accessories include a remote blower, ductwork, work surface, and base cabinet or stand. Optional accessories like service fixture kits, electrical duplex kits, airflow monitor kits, etc., can be purchased based on your specific needs.
Q: What are the electrical requirements for the hood?
A : The hood operates on 100-115 volts, 50/60Hz, drawing 10 amps. Ensure your electrical supply meets these specifications for proper functioning.

8′ Protector XL Benchtop Laboratory Hood with 2 services fixtures and 1 electrical duplex, 24″ interior depth
View online: https://www.labconco.com/product/8-protector-xl-benchtop- laboratory-hood-with-2-services-fixtures-and-1-e/3799

Overview

catalogue Number : 111800002

The Protector XL Benchtop Laboratory Hoods are general chemistry hoods that offer superior design flexibility. They are available in widths from 3 to 16 feet and three depths to meet a variety of installation and application requirements. These hoods incorporate containment-enhancing features allowing them to operate at face velocities as low as 60 fpm and meet the SEFA-1 standard of a low velocity high performance hood.
SEE OUR SUSTAINABILITY INITIATIVES

Specifications

Weight: 675.0 lbs
Weight metric : 306.0 kg
Dimensions: 96.0″ w x 31.7″ d x 59.0″ h
Dimensions metric: 243.8 x 80.5 x 149.9 cm
Electrical: 100-115 volts, 50/60Hz, 10 amps
Product Subcategory : General Chemistry
Nominal Width: 8′
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL Electrical Duplexes: 1
Enclosure Height: 59.0″
Exterior Depth : 31.7″ (80.5 cm)
Lighting: LED
Service Fixtures: 2
Style : Benchtop

Features

By-pass airflow design
Eco-Foil Air Foil with aerodynamic Clean-Sweep™ airflow openings
Cord-Keeper™ Slots on the left and right side of air foil
Glacier white powder-coated steel exterior
Chemical-resistant, fiberglass-reinforced, composite panel liner and baffle
Opti-Zone™ Baffle with flame spread index less than 25 per ASTM E84. The baffle is removable for cleaning Tempered safety glass vertical-rising sash(es) with cable and pulley(s) and powder-coated aluminum sash handle(s). 8′ models have optional split dual
sashes. 10′, 12′ and 16′ models have split dual sashes (four on 16′ models)
37.5″ (95.3 cm) high sightline from the work surface and header panel
Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
Powder-coated stainless steel, 12.8″ (32.5 cm) ID exhaust connection(s)
10′, 12′ and 16′ models also feature a by-pass block

Required Accessories (not included)

Remote blower Ductwork
Work Surface
Base cabinet or stand

Optional Accessories (not included)

Service Fixture Kits (some models include service fixtures) Electrical Duplex Kits (some models include electrical duplex) Guardian Airflow Monitor Kits
Distillation Grid Kits
Snuffer™ Fire Extinguisher
Ceiling Enclosure Kits
Rear Finish Panel Kits