EPOMAKER 40 Keybord User Guide
- September 23, 2024
- EPOMAKER
Table of Contents
EPOMAKER 40 Keybord
40% Hot Swappable RGB 2.4Ghz/Bluetooth 5.0/Wired Mechanical Gaming
Keyboard
Should you require more assistance please email us at
support@epomaker.com
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd. Address: Sixth Floor, Kai
Daer Building, No.168 Tongsha Road, Xiii Street, Nanshan Disctrict,
Shenzhen,Guangdong, CN Email:
support@epomaker.com
Web: www.epomaker.com
EC REP
APEX CE SPECIALISTS GMBH
Habichtweg 1 41468 Neuss Germany
Contact Wells Van E-mail: info@apex-ce.com
UK REP
APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT, UK
Contact Wells Van E-mail: info@apex-ce.com
FUNCTION KEY COMBINATIONS
PAIRING BLUETOOTH
Toggle the switch to the left, make sure that the keyboard is under the
Bluetooth mode:
- Hold Fn+A/S/D for 3-5 seconds till the Right Indicator flashes fast, the keyboard is ready to pair.
- Turn on your Bluetooth device and find “EPOMAKER TH40”, then connect. When the keyboard is connected to the Bluetooth device, the indicator stops flashing and the connection is done.
- Press Fn+ A/S/D to toggle between the Bluetooth devices 1/2/3 .
PAIRING WIRELESS 2.4GHZ
Toggle the switch to the right, make sure that the keyboard is under the 2.4G
mode:
Insert the 2.4G dongle to your device. When the Right Indicator stops blinking
and the connection is done.
To reconnect via 2.4G mode if it is disconnected, long press Fn+F till the
Right Indicator blinks fast and insert the receiver to your device.
WIRED MODE
Toggle the switch in the middle and plug the keyboard.
Note: The battery charges under either wireless or wired mode, as long as the
keyboard is plugged.
CHECK BATTERY
Hold Fn+L_Spacebar, the keys from Q to P lights up to show the battery
percentage; for example, if the keys from Q to Y light up when holding
Fn+L_Spacebar, it means that the battery life is currently 60%; if keys of Q-P
light up, battery life is 100%.
INDICATOR
Left: Capslock
Middle: Win lock
Right: Connection Indicator
Win/Mac OS Mode: Press Fn+R_Shift, when the LEFT indicator flashes one time,
the keyboard is in Win mode; three times, Mac mode.
HOW TO USE VIA
-
Please visit “https://github.com/WestBerryVIA/via-releases/releases” to download the latest VIA application for your computer’s OS. Turn on the button of “Use V2 definitions (deprecated)”
-
lmport the JSON File to VIA
If the keyboard is under the wired mode: download Epomaker TH40 USB json file via https://epomaker.com/blogs/via-json/epomaker-th40-usb-via-json and load the file; If the keyboard is under 2.4G mode, download Epomaker TH40 2.4G json file via https://epomaker.com/blogs/via-json/epomaker-th40-24g-via-json and load the file.
-
When the loading is completed, the “Configure” Tab displays the layout and programmable functions.
SPECS
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switche
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch rNJay from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to
support@epomaker.com with your purchase order
number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your
keyboard from a distributor or not from any official store of Epomaker, please
contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur
from normal wear and tear. If your product is defective we will send you
a replacement unit. Replacement units might require you to send the defective
unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website
(EPOMAKER.com). Your item will not be covered by your 1 year warranty if the
inspection shows any sign of modification or changes unsupported by the
original product, these include: Changing internal components, Assembling and
reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do
not have a warranty with us if you bought the item from another reseller or
likewise. Please contact the store that you bought your product from ta
resolve issues.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>