AVA TOAST 184T3300B Commercial 10 Inch Wide Conveyor Toaster User Manual
- June 9, 2024
- AVA TOAST
Table of Contents
- Adjustable Speed Conveyor Toaster
- SAFETY
- CIRCUIT DIAGRAM
- DISCHARGE ASSEMBLY
- STACKING KIT
- 184STK10 – 10″ WIDE
- 184STK145 – 14½” WIDE
- BEFORE USING YOUR TOASTER
- USING YOUR TOASTER
- CLEANING & MAINTENANCE
- DIMENSIONS
- EQUIPMENT LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AVA TOAST 184T3300B Commercial 10 Inch Wide Conveyor Toaster
Adjustable Speed Conveyor Toaster
84T3300B 208V – 3300W (10″ Wide Belt)
184T3300D 208V – 3300W (10″ Wide Belt)
184T3600D 208V – 3600W (14½” Wide Belt)
184T3600B 208V – 3600W (14½” Wide Belt)
184T140 120V – 1750W (10″ Wide Belt)
SAFETY
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions carefully and completely.
- For commercial use only.
- DO NOT touch hot surfaces.
- Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
- Unplug this unit when not in use and before cleaning.
- Allow the unit to cool before putting on or taking off parts.
- DO NOT operate this or any appliance with a damaged electrical cord or plug.
- DO NOT operate this or any appliance after it has malfunctioned or has been damaged in any way.
- DO NOT use outdoors.
- DO NOT place on or near a hot gas or electric burner
- Attach plug to appliance first, then plug electrical cord into the wall outlet.
- Disconnect the unit by removing the electrical plug from the wall outlet.
- DO NOT use appliance for any application other than intended use.
- DO NOT insert metal utensils or oversized foods into this unit, as they may cause a fire and heighten the risk of electrical shock.
- DO NOT store any item on top of this unit when in operation.
- DO NOT allow this oven to touch or to be covered by flammable material, such as curtains, draperies, walls, etc., when in operation.
- DO NOT clean with metal scouring pads, as pieces can break off and touch electrical components, heightening the risk of electrical shock.
- Never place materials such as paper, cardboard, plastic, etc. in this oven.
- DO NOT cover interior of this unit with metal foil, as it may cause the oven to overheat.
- Avoid scratching the surface or nicking the edges of this unit. If the oven is damaged or broken, contact customer service before use.
- Turn off the appliance by removing the plug from the wall outlet.
- Note that the use of accessories not recommended by the manufacturer may result in injury.
- Children should be supervised to ensure that they DO NOT play with the oven.
- This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless a person responsible for their safety has given them supervision or instruction concerning use of the appliance.
- When using the appliance in shops, snack bars, hotels etc., check the voltage and outlet to make sure the appliance is correctly connected with power.
- Place unit on a flat surface that is well ventilated. The appliance must be supervised during operation. DO NOT leave appliance without powering off.
NOTE: Save these instructions for future reference.
CIRCUIT DIAGRAM
WIRING DIAGRAM
MODEL: CONVEYOR TOASTER 184T140
1.75kW/120VAC/50-60Hz
LEGEND | DESCRIPTION |
---|---|
XL | 25A/300V |
HL1 | 120V |
QS | 16A/250V |
EH1, EH2 | 710W, 1040W/120V |
∞ | 12×12/120V |
M | 120V/60Hz |
R | 30W/150 |
θS | 90°C 16A/250V |
D | IN5408/4A |
WIRING DIAGRAM
MODEL:CONVEYORTOASTER
184T3300B 208V – 184T3600B 208V
LEGEND | DESCRIPTION |
---|---|
ER | ENERGY Regulator |
E1/E3 | TOPELEMENT-165W0/ 208V (1800W/ 208V) |
E2/E4 | BOTTOMELEMENT1650W /208V (1800W/208V) |
H1 | CONTROL PILOTLIGHT240V |
M1 | CONVEYOR MOTOR 208V |
CF | COOLING FAN 240V |
SC | CONVEYOR SPEED CONTROL |
LEGEND | DESCRIPTION |
--- | --- |
ER | ENERGY REGULATOR |
ES/E7 | TOP ELEMENT-1650W1240V (180W0I240 |
E6/E8 | BOTTOM ELEMENT1650W / 240V (1800W / 240V) |
H1 | CONTROLPILOT LIGHT 240V |
M | CONVEYOR MOTOR240V |
CF | COOLING FAN 240V |
SC | CONVEYOR SPEED CONTROL |
DISCHARGE ASSEMBLY
As detailed in the diagrams below, the unit can either be assembled with front or rear discharge depending on installation position and preference.
FRONT DISCHARGE
- Pull metal plate up to the closed position and latch. This will direct food to the bottom of the toaster.
- Pick up the longer of the two chutes.
- Slide the flanged end of the chute up underneath the toaster.
- Rest the flanged end of the chute onto the interior ledge
REAR DISCHARGE
- Push the metal plate down to the open position. This will direct food to the back of the toaster.
- Loosen the two rear screws.
- Pick up the smaller of the two chutes.
- Slide the two keyholes on the chute behind the loosened screws. If the chute does not fit all the way down, loosen the screws more.
- Tighten the screws to secure the chute to the toaster.
STACKING KIT
184STK10 – 10″ WIDE
184STK145 – 14½” WIDE
The optional stacking kit attachment can be used to mount one toaster on top of another.
- To mount, set up both toasters for front discharge.
- Remove the two rear top cover screws from the bottom toaster.
- Place the stacking bracket onto the top cover of the toaster.
- Replace the two top cover screws, securing the stacking bracket in place.
- Remove the discharge chute from the toaster to be placed on top.
- Place the toaster onto the bracket, ensuring the leveling feet lo
BEFORE USING YOUR TOASTER
Before cooking anything in your oven for the first time, please follow these simple instructions:
- This conveyor toaster has been designed to continuously produce toasted bread or buns. The desired toasted color of the product can be adjusted by changing the belt speed of the conveyor. Depending on installation position, the toasted product can be discharged to the front or rear of the unit.
- Ensure the support feet are assembled to the unit before commencing operation.
- Thoroughly clean as described in the cleaning section of this manual (page 6).
- For best results, allow the unit to preheat for 20-25 minutes before use so that the correct operating temperature can be reached.
USING YOUR TOASTER
184T140
The unit has two controls.
-
Speed/color control Determines the length of time the toast or product is in the heating chamber.
The slower the speed, the longer the exposure and the darker the product. -
Heat control switch has 4 settings.
“OFF” – In this position, the unit is off.
“STANDBY” – In this position, the conveyor belt will run and both top and bottom elements will operate at 25% capacity. This mode is designed to keep the unit warm in quiet periods to reduce start-up time and conserve energy.
“BREAD” – In this position, both top and bottom elements operate at full capacity.
This is the ideal mode for toasting bread.
“BUNS” – In this position, only the top element operates at full capacity.
This is the ideal setting for toasting one side only of a bun.
184T3300B • 184T3300D • 184T3600B • 184T3600D
These units have three controls.
-
Speed/color control Determines the length of time the toast or product is in the heating chamber.
The slower the speed, the longer the exposure and the darker the product.
The top and bottom heating elements are independently controlled. -
Heat Control Top Element is infinitely adjustable.
“0” is the off position. “6” is the hottest setting. “1” is the lowest setting.
Heat Control Bottom Element is infinitely adjustable.
“0” is the off position. “6” is the hottest setting. “1” is the lowest setting.
As described above, product appearance or color is dependent on conveyor speed and type of product. These other factors may also affect the toasting color:
i. Moisture content of the product.
ii. Sugar content of the product.
iii. Initial product temperature.
CLEANING & MAINTENANCE
CAUTION: THIS APPLIANCE SHOULD NOT BE IMMERSED IN WATER. USE ONLY A DAMP CLOTH OR SPONGE DIPPED IN SOAPY WATER. DO NOT USE STEEL WOOL AS IT WILL DAMAGE THE BRIGHT STAINLESS STEEL FINISH. EXTERIOR & CRUMB TRAY
- Unplug the power cord from the wall outlet.
- Wait for the oven to cool.
- Wipe off the unit with a dry cloth and wait at least half an hour before reconnecting to the power outlet. 4. Remove the crumb tray from the unit by pulling forward. Dispose of the crumbs and clean the tray with a damp cloth or sponge dipped in soapy water. Refit the tray before reusing the unit.
CONVEYOR BELT
- Turn off the toaster and allow the unit to cool down.
- Turn the unit on and set to Standby Mode, adjust the belt to slow speed.
- Using an abrasive pad, wipe the conveyor belt in a back and forth motion (ie: side to side) to remove baked-on product.
- Finally, clean the belt with a damp cloth in the same manner described in number 3.
SUGGESTED CLEANER Noble Chemical QuikSan Food Contact & Surface Sanitizer
DIMENSIONS
MODEL | A | B | C |
---|---|---|---|
184T3300B / 184T3300D | 14 .5″ | 16 .5″ | 17″ |
184T3600B / 184T3600D | 18 .5″ | 16 .5″ | 18″ |
184T140 | 14 .5″ | 16 .5″ | 30″ |
EQUIPMENT LIMITED WARRANTY
AvaToast warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by AvaToast covering your AvaToast brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment. Only the equipment’s original purchaser may make a claim under this warranty. AvaToast reserves the right to approve or deny the repair or replacement of any part or repair request. The warranty is not transferable. AvaToast Equipment installed in/on a food truck or trailer will be limited to a period of 30 days from the original date of purchase.
To Make a Warranty Claim:
For Warranty Inquiries contact the location where you purchased the product:
- WebstaurantStore.com: Contact help@webstaurantstore.com. Please have your order number ready.
- The Restaurant Store: If you purchased this unit from your local store, please contact your store directly.
- TheRestaurantStore.com: Online purchases, call 717-392-7261. Please have your order number ready.
Failure to contact the designated location prior to obtaining equipment service may void your warranty.
AvaToast makes no other warranties, express or implied, statutory or otherwise, and HEREBY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.
- This Limited Warranty does not cover:
- Equipment sold or used outside the Continental United States
- Use of unfiltered water (if applicable)
- AvaToast has the sole discretion on wearable parts not covered under warranty
- Equipment not purchased directly from an authorized dealer
- Equipment used for residential or other non-commercial purposes
- Equipment that has been altered, modified, or repaired by anyone other than an authorized service agency
- Equipment where the serial number plate has been removed or altered.
- Damage or failure due to improper installation, improper utility connection or supply, and issues resulting from improper ventilation or airflow.
- Defects and damage due to improper maintenance, wear and tear, misuse, abuse, vandalism, or Act of God.
Any action for breach of this warranty must be commenced within 1 year of the
date on which the breach occurred.
No modification of this warranty, or waiver of its terms, shall be effective
unless approved in a writing signed by the parties. The laws of the
Commonwealth of Pennsylvania shall govern this warranty and the parties’
rights and duties under it. AvaToast shall not under any circumstances be
liable for incidental or consequential damages of any kind, including but not
limited to loss of profits.
References
- The Restaurant Store: Restaurant Equipment & Supplies
- WebstaurantStore: Restaurant Supplies & Foodservice Equipment